
MODEL 110-PA
WOOD-FIRED OVE
The Model 110-PA wood fired oven has a 43” interior cooking
diameter and a 20 ½ ” wide by 10 ½ ” high oven entrance. The
body parts are a cast 4 to 6 inch thick dense, high temperature
refractory material with an 80% alumina content and additional
special additives which stop deterioration from acids emitted by
wood combustion. The Model 110-PA is U.L. listed for
installation with a 1-inch side clearance to combustible materials.
Total weight 3500 lb.
The steel support frame and enclosure are constructed of heavy
gauge welded tube steel and angle iron members. All precisely
fabricated and attractively designed. The void area between the
cast oven body and steel circular enclosure is entirely filled with 4
to 20 inches of a hardened lightweight insulation mixture, which
forms a secondary molded body. The combination of our thick
cast refractory body and an outer insulation shell maximizes the
thermal mass or heat storage capacity of the oven which allows
for an extremely efficient oven that cooks at even non fluctuating
temperatures.
The temperature probe is placed 3 ½” into the dome or top of the
oven in lieu of on the floor in order to avoid temperature readout
fluctuations caused by food items placed on the floor.
Pizza Capacities:
8” Pizzas: 6-7
12” Pizzas: 4
16” Pizzas: 2
A stainless steel adapter sleeve is placed over the standard
eyebrow hood, which comes with either a stainless steel or copper
hood cover.
The hearth floor tiles, “Pierre de Boulanger” (Bakers Tiles),
which are used in industrial bread baking ovens all across Europe,
are refractory material pressed at 8,500 p.s.i. and kiln fired at
2,800 degrees which ceramitizes the material to create a hard and
extremely durable tile. Both the body pieces and floor tiles are
cast and assembled individually which allows for continuous
joints throughout the entire oven. This greatly reduces the
possibility of stress cracks due to normal heat expansion and
contraction. In addition this allows the ovens to be serviceable
which extends their usable life.
Ovens come standard with:
• Factory finished gray paint
• Dial Thermometer
• Cast Aluminum door
• Granite shelf
• Hood cover (s/s or copper)
• Shelf apron (s/s or copper)
• S/S Flue adapter
• Metal pizza peel
• 5 year limited warranty
Custom options and finishes available
LA Research Report No. : RR-7813
New York MEA No.: 207-98E
6717 San Fernando Rd. Glendale CA 91201
Tel: 800-840-4915 - 818-553-1134 Fax: 818-553-1133
www.earthstoneovens.com
Specifications to change without notice. revised January 2001

COPPER)
DIAL TEMPERATURE GAUGE
COPPER)
6717 SAN FERNANDO RD
GLENDALE CA 91201
TEL: 818-553-1134 FAX: 818-553-1133
27”