Earthquake Sound PH2200W-4, PH800W-2 User Manual

EARTHQUAKE SOUND
PowerHouse Series Amplifiers
Owners Manual
MODELS:
PH800W/2 PH1000W/2 PH2200W/4
PH2000W/D1
PH2000W/D1.1
PH5000W/D1 PH10000W/D1 PH20000W/D1
The Sound That Will Move You.
Earthquake Sound reserves the right to amend details of the specifications without notice.
Copyright © Earthquake Sound Corporation
Earthquake Sound Corporation • 2727 McCone Avenue Hayward CA, 94545 • Phone: 510-
732-1000 Fax: 510-732-1095
Sound That Will Move You.
Table Of Contents
Cautions and Advisories Warranty Specifications PH800W/2 PH1000W/2 PH2200W/4 PH2000W/D1 PH2000W/D1.1 PH5000W/D1 PH10000W/D1 Installation Example
Page 2 Page 3 - 4 Page 5 Page 6 - 7 Page 8 - 9 Page 10 - 11 Page 12 - 13 Page 12 - 13 Page 14 - 15 Page 16 - 18 Page 19
THANK YOU
Thank you for choosing Earthquake Sound’s high-end line of PowerHouse amplifiers for superior enhancement of your mobile audio system. With proper installation and responsible listening, your amplifier(s) will give you years of near perfect sound reproduction.
We strongly recommend you to have your new amplifier(s) installed by an authorized Earthquake Sound dealer: Installation professionals employed by your dealer have the correct tools and knowledge to install your amplifier(s) neatly and successfully. Also, when your new products are installed by an authorized dealer, your product will include a FIVE YEAR LIMITED WARRANTY (1-Year for Digital models excluding PH2000W/D1 and PH2000W/D1.1). If you choose to perform your own installation, your warranty will be subject to limitations. Dealer policies on handling warranty requests may vary from one dealer to the next. Please read the warranty information in its entirety and use good judgment when making these vital decisions.
WARRANTY
Five (5) year limited warranty; PH800W/2, PH1000W/2, PH2200W/4, PH2000W/D and PH2000W/D1.1:
Earthquake warrants the original purchaser that all Factory Sealed New Audio Products be free from defects in material and workmanship, under normal and proper use, for a period of five (5) years from the date of purchase (as shown on the original bill of sale with serial number affixed/written on it). The five (5) year limited warranty period is valid
only if the product was purchased from and properly installed by an authorized Earthquake Sound dealer/installer, and the warranty registration card is properly completed and mailed to Earthquake Sound Corporation.
!
Products that were purchased from non-authorized dealers are not covered by warranty.
!
If the product was not installed by an authorized dealer, then only a ninety (90) day warranty period applies.
!
Open box, B-stock and DEMO products have only thirty (30) day warranty from the date of purchase.
(A) Five (5) year limited warranty plan coverage guidelines:
!
First year: Earthquake pays for labor, parts, and ground freight (only in US mainland, not including Alaska and Hawaii) back to customer.
!
Second, third, fourth & fifth year: Earthquake pays labor only. Customer must pay for parts, re-packing (if needed) and freight both ways.
!
Earthquake agrees to repair or replace - at our option - all such defective products/parts.
(B) Warning:
Products (sent in for repair) that are tested by Earthquake technicians and deemed to have no problem(s) will not be covered by the five (5) year limited warranty. Customer will be charged a minimum of one (1) hour of labor (ongoing rates) plus shipping and handling charges.
CAUTION:
Earthquake Amplifiers are capable of generating high sound pressure levels. You should exercise caution when operating these amplifier
systems. Long term exposures to high levels of sound pressure will cause permanent damage to your hearing. Sound pressure levels exceeding 85dB can be dangerous with constant exposure. Set your audio system to a comfortable loudness level. Earthquake Sound Corporation does not assume liability for damages resulting from the direct use of Earthquake amplifiers or other Earthquake products , and urges users to play their music at moderate listening levels.
SOUND LEVEL DBA
90 92 95
97
100 102
105 110 115
DURATION IN HOURS
8 6 4
3 2 1 - 1 1/2
1 1/2 1/4 or less
THE CHART (ON THE SIDE) SHOWS THE U.S. GOVERNMENTS OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA) REGULATIONS WHICH WERE IN E F F E C T A T T H E T I M E O F T H I S PUBLICATION FOR PERMISSIBLE NOISE EXPOSURE, PER 29CFR1910.95, TABLE G-
16.
(C) Warranty Limitations:
!
Defective products/parts have not been altered or repaired by other than an Earthquake factory approved technician.
!
Products/parts are not subjected to negligence, improper use, or accident, damaged by improper line voltage, used with incompatible products, or have its serial number or any part of it altered, defaced or removed, or have been used in any way that is contrary to Earthquake's written instructions.
!
Damages to speaker cabinet and cabinet finish due to misuse, abuse, or use of improper use of cleaning materials/methods.
!
Bent speaker frame, broken speaker connectors, holes in speaker cone, surround & dust cap, burnt speaker voice coil.
!
Fading, deterioration of speaker components and finish due to improper exposure to elements.
!
Bent amplifier casing, damaged finish on the casing due to abuse, misuse, or improper use of cleaning material.
!
Burnt tracers on PCB.
!
Product/part damaged due to poor packaging or abusive shipping conditions.
!
Subsequent damage to other products.
WARRANTY CONTINUED ON NEXT PAGE
2 3
Specifications Are Subject To Change Without Notice www.earthquakesound.com
WARRANTY
A warranty claim will not be valid if the warranty registration card is not properly filled and returned to Earthquake with a copy of the purchase receipt.
(E) Service Request:
To receive product(s) service, contact Earthquake service department at (510) 732-1000 and request an RMA (Return Material Authorization) number. Items shipped without a valid RMA number will be refused. Make sure you provide us with your complete/correct shipping address (NO P.O. Box), a valid phone number and a brief description of the problem you are experiencing with the product(s). In most cases, our technicians might be able to resolve the problem over the phone, thus eliminating the need to ship the product(s).
(F) Shipping Instructions:
Product(s) must be packaged in its original protective box(es) to minimize transport damage, otherwise a re-packing charge may apply. Shipper claims regarding items damaged in transit must be presented to carrier. Earthquake Sound Corporation reserves the right to refuse products that are improperly packed. Copy of original purchase receipt must accompany product(s) being returned for service. We encourage you to include with the package a written description of the problem. Ship product to:
Earthquake Sound Corp.
2727 Mc Cone Avenue. Hayward, CA 94545
Phone: (510) 732-1000 You are responsible for the cost of shipping and insurance for the product(s). Please be sure to write the RMA number on every box.
(G) Disputes Resolution:
All disputes - between client(s) and Earthquake Sound Corporation - resulting from the five (5) year limited warranty policy must be resolved according to the laws & regulations of the county of Alameda, California.
NOTE: For warranty guidelines on the PH5000W/D1, PH10000W/D1 and PH20000W/D, please refer to the one provided in the product packaging.
Dimensions (HxWxL)
2.375" x 10.125" x 8.5"
9
Weight
2 x 105
Power
4-Ohm Stereo
2 x 200
Power
2-Ohm Bridged
N/A
Power
1-Ohm
SPECIFICATIONS
1 x 400
Power
4-Ohm Bridged
800
Max Power
2.375" x 10.125" x 12"
2.375" x 10.125" x 10.375"
2.375" x 10.125" x 13.375"
11
13.5
4 x 130
2 x 145
2 x 250
4 x 250
N/A
N/A
1 x 500
2 x 500
1000
1400
2.375" x 10.125" x 12"
13
13
1 x 500
1 x 450
1 x 700
1 x 1000
N/A
1 x 1000
MONO
MONO
1400
1400
2.375" x 10.125" x 15"
16
1 x 860
1 x 3000
1 x 5000
MONO
4.5" x 12" x 28.625"
2.375" x 10.125" x 16.5"
18
1 x 900
2 x 3000
1 x 3000
1 x 20,000
N/A
1 x 5000
6000
MONO
*** ALL POWER RATINGS ARE PEAK POWER ***
5000
5000
20000
*** ALL MEASUREMENTS ARE MADE USING RESISTIVE LOAD ***
Please keep this warranty information in your files for future reference if necessary. It is
SERIAL NUMBER
recommended that you stick your serial number here for future reference.
4
Specifications Are Subject To Change Without Notice
2
Channels
Model
PH800W/2
2
4
PH1000W/2
PH2200W/4
1 (MONO)
1 (MONO)
1 (MONO)
PH2000W/D1
PH5000W/D1
PH2000W/D1.1
2
1 (MONO)
PH10000W/D1
PH20000WD
When in “AUTO ON” mode, the amplifier will automatically detect an incoming signal once the stereo is turned on. If
the amplifier does not detect a signal within 20 minutes, it will automatically shuts down.
When in “REMOTE ON” mode, the amplifier relies on the remote wire to detect a signal.
!
!
SIGNAL SENSOR
This new feature allows you to eliminate the use of a remote wire to turn on your amplifier.
NOTE: The RCA outputs must be inserted in CH1/2 for the amplifier to detect any incoming signal.
NOTE: In some cases when the amplifier is on “AUTO ON” mode, if your system generates noise through the RCA wire
www.earthquakesound.com
and therefore waking up the amplifier, you may want to switch your amplifier installation to the “REMOTE ON”
mode (must use the turn on wire).
5
Loading...
+ 7 hidden pages