Sea
Machine
The Sea Machine is a chorus pedal with ultimate control over parameters rarely seen in a chorus. A hybrid of
digital and analog circuitry with a slightly extended delay time allows it to really stand out and shimmer. The
heart of the Sea Machine is a short digital delay line, which features controls for Animation, Dimension and
Depth. The Animation allows control over the delay time, Dimension adjusts the amount of spatial regeneration
and the Depth adjust the mix of the modulated wet signal against the dry analog signal. The LFO section of
the Sea Machine is comprised of Rate, Intensity and Shape. The Rate adjusts the speed of the oscillator, the
Intensity adjusts how much the LFO modulates the delayed signal and the Shape transforms the wave from a
soft triangle to a hard square wave. We also included a small LED which
LFO, even in bypass. With this mix of standard and unique controls, everything from subtle warble, classic
Leslie, seasick pitch bends to strangled alien sounds, stunted arpeggiations and many more far out sounds are
on tap. The Sea Machine also was designed to work well following fuzz, distortion or overdrive without getting
muddy, reducing volume or breaking up. When engaged, the transparent buffer leaves the all-analog dry signal
unaltered and crystal clear. The Sea Machine is true bypass and made by human hands with the highest
quality parts in shimmering Akron, Ohio.
Controls
• Rate: Sets the speed of the LFO. The miniature LED will show the tempo even in bypass mode.
• Shape: From soft triangle through hard square wave.
• Dimension: Adds a slight slap-back at low levels, reverb-like ambiance at mid levels and an
echo-resonance at max.
shows the speed and shape of the
• Intensity: How much the LFO modulates the delay time
• Animate: How far the pitch shifted signal swings, lower levels equals a tighter and more
focused shift à la traditional chorus. As you increase the control a more wild and animated pitch
shift begins to emerge.
• Depth: How much modulated signal is blended in with the dry signal.
Start Up
To start with a basic chorus sound, keep the dimension, shape and animate fully counter-clockwise (off), set the
Depth and
bring in the animate to make it more wild, turn up the shape to destroy it.
Rate around noon and adjust intensity to taste. Slowly add in the dimension to give it more atmosphere,
Power
Any standard regulated 9 volt power supply with a negative center 2.1mm barrel. Do not run at higher voltages!
Does not use batteries. Current draw is around 100ma.
For best results, place after dirt pedals and before any signal boosters.
See EarthQuakerDevices.com for warranty information or write: info@earthquakerdevices.com
© 2015 EarthQuaker Devices LLC. | www.earthquakerdevices.com