Earthquaker Devices Cloven Hoof User Manual
Hello Mr./Mrs. Musician, welcome to your new Cloven Hoof fuzz device from EarthQuaker
Devices brand effect pedals! The Cloven Hoof is an extension of our popular Hoof
fuzz, only more... cloven. We kept the clarity of the Hoof along with the wide range
of dirt tones and redesigned everything around it. The Cloven Hoof delivers a grittier,
more bass heavy tone with more crunch that can not be achieved with the standard
Hoof. We did away with the germanium transistors and replaced them with 4 specially
selected silicon transistors for higher gains, cleaner cleans and improved temperature
stability. The fuzz control has four times the range of the regular Hoof, it will go from
completely clean to an all out fuzz fury with more grind at the top end of the dial. The
all the additional low end. The shift control still boosts or cuts the mids and there is still
a TON of output on tap. The Cloven Hoof is the perfect solution for those of you who
always wished the Hoof had more. Each Cloven Hoof is made by hand in the majestic
mountain top village of Akron, Ohio.
Controls
Fuzz: Clockwise for heavy, counterclockwise for light.
Tone: Bass to the left, Treble to the right
Level: Use this control to make the Cloven Hoof louder or quieter.
Shift: This adjusts the mid content, clockwise for scooped mids, counterclockwise for
boosted.
Power
Any regulated 9 volt DC power supply with a negative 2.1mm center barrel or any type
of 9v battery. Current draw is around 10ma.
Questions? Concerns?
Send an email to info@earthquakerdevices.com
See EarthQuakerDevices.com/info for warranty information.
© 2014 EarthQuaker Devices LLC. | www.earthquakerdevices.com
Loading...