Earthquaker Devices Arrows User Manual

Arrows

Preamp Booster

Hey boss, welcome to your new Arrows effect pedal! You ready to start boostin’?
The Arrows is an all-discrete tone sculpting preamp booster. It was designed with
the intention of adding an additional channel of gain to all your dirt pedals as well
as brightening up neck pickups. It boosts midrange, tightens up the low end and
makes the top end shine while adding some push to drive your dirt into blooming
sustain with excellent harmonics. Its simple interface is no nonsense; a single
control that will either boost or cut your signal. Use the Arrows to remove the
muck from bass heavy fuzz pedals, push light overdrives into higher gains than
you thought possible or even on its own to make your signal really pop with more
pizazz. All analog, true bypass and handmade one at a time in the weird pit of
Akron, Ohio.

Controls

Level: Boosts or cuts the output volume.

Power

A standard 9 volt DC power supply intended for musical instruments with
a negative center 2.1mm barrel or a 9v battery.

Suggested Placement

Before all dirt pedals to add an additional level of gain and clarity. It
can also be placed at the end of your signal chain to drive your amp into
saturation and restore top end clarity.

© 2014 EarthQuaker Devices LLC. | www.earthquakerdevices.com | [e-mail]