Earthquaker Devices Arpanoid User Manual
tch arpeggiator
effect pedal for electrical guitar! What does the Arpanoid do? The Arpanoid
takes whatever you play and transforms it into an adjustable ascending or
descending scale. It features 8 intuitive and expandable modes and will work
on complex chords as well as single notes in any key. The Arpanoid has an
all analog dry signal, all digital wet signal and true bypass switching. Like all
EarthQuaker Devices pedals, this dude is handmade one at a time in sunny
Akron Ohio.
Controls
Wet- Level control for the effect signal. Unity is around noon.
Dry- Level control for the dry signal. Unity is around noon.
Rate- Adjusts the speed of the sequence.
Step- Selects how many notes there are in the sequence which determines the
overall feel and timing.
- Toggle switch to control the direction of the sequence. All the way left
is up, the sequence will continually repeat going up. In the middle is up/down, the
sequence will continually repeat going up then back down. All the way right is down,
the signal will continually repeat going down.
Mode- 8 position selector switch to choose the octave and key:
1: Major: -1 octave to root.
2: Major: root to +1 octave.
3: Major: -1 octave through +1
4: Major: Random pattern
5: Minor: -1 octave to root.
6: Minor: root to +1 octave.
7: Minor: -1 octave through +1
8: Minor: Random pattern
Power
A standard regulated 9 volt DC power supply with a negative center 2.1mm barrel.
We do not recommend any adapter that isn’t designed for musical instruments. Do
not run at higher voltages! Does not use batteries. Current draw is 55ma.
Helpful Tip
We suggest you treat your Arpanoid like a new instrument and take the time to learn
how it works. Once you understand how the Arpanoid will work for you, you’ll receive
a lifetime of enjoyment from your new device.
See EarthQuakerDevices.com for warranty information.
© 2013 EarthQuaker Devices LLC. | www.earthquakerdevices.com | Info@earthquakerdevices.com
Loading...