How it Works
EarthQuake
Loading...
Shell ShoXX Gamer set
User Manual
16 pgs1.68 Mb0

EarthQuake Shell ShoXX Gamer set User Manual

Download
User’s Manual
SHELL SHOXX
The Ultimate Gaming Accessory
MQB-XX
™
300-XX
Earthquake Sound Corp. | (510) 732-1000 | www.earthquakesound.com
Table of Contents
Introduction
3
Safety Instructions
3-5
What’s in the Box
6
Applications
6
Setting Up the System
7
Connecting to a TV
8
Connecting to a Computer
9
Using Shell Shoxx with iQuake-52
10
Connecting a Computer to iQuake-52
11
Connecting a Video Game Console with iQuake-52
12
Connecting a MiniMe to the iQuake-52/Shell Shoxx System
13
Specifications
14
Warranty Guidelines
15
The Sound That Will Move You.
Earthquake Sound Corporation 2727 McCone Avenue Hayward, CA 94545 Tel: 510-732-1000 Fax: 510-732-1095
Customer Support tech@earthquakesound.com Tel: 800-576-7944 Fax: 510-732-1095
© 2011 Earthquake Sound Corporation. All rights reserved.
This document should not be construed as a commitment on the part of Earthquake Sound Corporation. The information is subject to change without notice. Earthquake Sound Corporation assumes no responsibility for errors that may appear within this document.
Introduction
The Shell Shoxx set includes the MQB-XX shaker and 300-XX, a matching 300-watt max amplifier. This gaming set is the ultimate gaming accessory and brings 3D Motion™ to any set-up. The MQB-XX is a patented shaker that converts low frequencies into powerful vibrations. It is optimized to clamp on to virtually any office chair; however, can be clamped onto an ordinary chair leg or couch structure as well. The MQB-XX is powered by our 300-XX, an amplifier specifically designed for our shaker.
Shell Shoxx comes with all the necessary accessories and wires. The easy install system requires no screws or installation. Simply clamp on, plug in, and play. Shell Shoxx adds another dimension to your gaming experience with Earthquake’s 3D Motion™ technology.
Safety Instructions
Safety First
This documentation contains general safety, installation, and operating instructions for Shell Shoxx. It is important to read this user’s manual before attempting to use these products. Pay particular attention to the safety instructions.
Symbols Explained:
Appears on the component to indicate the presence of uninsulated, dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.
Calls attention to a procedure, practice, condition or the like that, if not correctly performed or adhered to, could result in injury or death.
Calls attention to a procedure, practice, condition or the like that, if not correctly performed or adhered to, could result in damage to or destruction of part or all of the product.
Note:
Calls attention to information that is essential to highlight.
Shell Shoxx Manual 3Specifications are subject to change without notice
Safety Instructions
1) Read these instructions in their entirety.
2) Store this manual and packaging in a safe place.
3) Heed all warnings.
4) Follow instructions (do not take short cuts).
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatuses that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plus has two blades with one wider than the other. A grounding­type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched, particularly at
plugs, convenience receptacles, and the pint where they exit from the apparatus.
11) Only use attachments & accessories specified by the manufacturer.
12) Use only compatible rack or cart for final resting position.
13) Unplug this apparatus during lightening storm or when unused for a long
period of time.
14) Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in anyway, such as: power­supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15) To reduce the risk of fire or electric shock, do not expose this apparatus
to rain or moisture.
Unpacking System Components
• Keep the original carton and packing materials for future shipment or
storage.
• Check for any visual signs of damage. If you encounter any concealed
damage, consult your Earthquake Sound dealer before proceeding with unit installation.
• Retain the sales receipt as it establishes the duration of the limited warranty
and provides information for insurance purposes.
System Installation Considerations
There are several factors to consider before installing Earthquake Sound’s Shell Shoxx.
• What are the intended listening zones?
• What system options and accessories might be required for features such
as local sources, etc.?
• From where in each zone will the listener prefer to control the system? Where
will the remote gains be located? Where will the speakers be located?
• Where will the source equipment be located?
Connection Tips
• Keep all power cords away from all signal cables to prevent humming from
induced noise.
• Choose reliable signal cable cords (Earthquake Sound also specializes in
high-performance RCA cables and patches).
• All speaker wires that are ran through the walls should be twisted to reduce
potential hum noise pick up.
• Label both ends of all wires with the corresponding room location.
• It is best to use a grounded electrical outlet to power the amplifier. Lack of
input ground reference could be unsafe. Consult your electrical contractor about proper grounding.
Shell Shoxx Manual 5Specifications are subject to change without notice
The Shell Shoxx package comes with:
MQB-XX Shaker 300-XX Amplifier (110 or 220 Volt) Wired Controller to adjust amplifier intensity
Cables a) Power Supply cord to power the 300-XX b) Amplifier Output Cord (9ft) c) RCA to Mini cable d) RCA male to female cable e) RCA “Y” Adaptor female to dual male f) Mini “Y” Adaptor male to dual female
Other
2 Velcro Rings
a) b) c)
d) e) f)
Applications:
• Video games with gaming console
• Computer games
• Movie Watching
Great for:
Apartments Offices Dorm Rooms Bedrooms Teenager’s Room
Setting Up Your Shell Shoxx System
Attaching the Shell Shoxx Shaker to Your Chair
1) Mount your Shell Shoxx Shaker to your chair. If using an office chair, be
sure to push down the plastic sleeve covering the center post. Tighten securely once attached to the center post.
2) Use the velcro straps to secure the cord to the leg of your chair to prevent
rolling over it.
To Amplifier Output Cord (b)
Connecting the Shell Shoxx Amplifier to the Shaker
1) Make sure your Shell Shoxx Amplifier is turned off before hooking it up to
the Shaker.
2) Connect the amplifier output cord (b) to the Shaker cord. Then connect it to
the Amplifier’s speaker output. Be sure to match the red terminal with the positive connector (right) and the black terminal to the negative connector (left).
3) Connect the power supply cord (a) from the Amplifier to a wall outlet.
Amplifier
Amplifier Output Cord (b)
Speaker
Output
Shell Shoxx Manual 7Specifications are subject to change without notice
Connecting to a TV with Video Game Console
1) Locate the RCA input on your TV where your console is hooked up to.
Note: If you are using an HDMI cable for your audio/video, you may
have to change the settings in your video game console so that the audio outputs through the RCAs.
2) Unplug the white left audio supply and plug in one of the RCA Y adaptor’s
(e) male terminals.
3) Reconnect the console’s left audio to the RCA Y adaptor’s (e) female
terminal.
4) Connect the RCA cable’s
Connect the RCA cable’s (d) male terminal to the LEFT line level input. This uses the mono function.
Video Game Console
TV Audio Input
Left
(White)
RCA Y Adaptor (e)
(Red)
(d) female terminal to the RCA Y adaptor (e).
Right
Power Extension Cord (b)
RCA female to male (d)
Amplifier
Left (White)
Right (Red)
Line Level
Input
Speaker
Output
Connecting to a Computer
1) Locate the audio line out on your computer, commonly signified with a light
green ring.
2) Connect the Mini Y adaptor’s (f) male terminal to the computer audio
output.
3) Connect your computer speakers to one of the female terminals of the Mini
Y adapter (f).
4) Use the RCA to Mini (c) cable to connect the mini-jack to the other female
terminal of the Y adaptor (f). Connect the RCA jacks (c) to the line level input terminal on the Shell Shoxx Amplifier.
Audio Line Out
(Light Green Ring)
To Computer Speakers
RCA to Mini (c)
Mini Y Adaptor (f)
Line Level
Input
Power Extension Cord (b)
Amplifier
Left (White)
Right (Red)
Speaker
Output
Shell Shoxx Manual 9Specifications are subject to change without notice
Connecting with iQuake-52 iPod Docking Speakers
SUB -OUT
Serial Nu mber:
Aux AC Out let
120 VAC 60 Hz 0.2 A
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTI ON
O
.
f
c
n
N
l
o
,
r
a
t
h
c
i
r
A
e
m
C
US
VOLUME
INPUT
SELECTOR
LINE IN
L
R
OUTPUT
TO
SPEAKER
S-VIDEO
OUT
POWER
ON OFF
ESC 2727 McCone Avenue Hayward California U.S.A.
AUX
INPUT
USB
100- 120V AC 60 Hz T2AL 25 0V 220- 240V AC 50 Hz T1AL 25 0V
AC Se lect
FUSE
Earthquake’s iQuake-52 iPod Docking Speakers are a perfect sound stage for the Shell Shoxx gaming set. With a built in 200-watt amplifier, this set of speakers is powerful enough for your gaming and stereo needs.
iQuake-52 has three different audio inputs, the iPod dock, an RCA input, and a mini-jack input.
Connecting Shell Shoxx to iQuake-52
1) Connect an RCA cable (single to dual, not supplied) from the subwoofer
output on the iQuake-52 amplifier to the audio input on the Shell Shoxx amplifier.
300-XX Amplifier
Line Level
Left (White)
Right (Red)
Input
RCA dual to RCA single (not supplied)
iQuake-52 Amplifier
RCA to RCA
If You are Using a Computer with iQuake-52
SUB -OUT
Serial Nu mber:
Aux AC Out let
120 VAC 60 Hz 0.2 A
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTI ON
O
.
f
c
n
N
l
o
,
r
a
t
h
c
i
r
A
e
m
C
US
VOLUME
INPUT
SELECTOR
LINE IN
L
R
OUTPUT
TO
SPEAKER
S-VIDEO
OUT
POWER
ON OFF
ESC 2727 McCone Avenue Hayward California U.S.A.
AUX
INPUT
USB
100- 120V AC 60 Hz T2AL 25 0V 220- 240V AC 50 Hz T1AL 25 0V
AC Se lect
FUSE
1) Connect a Mini to RCA cable (c) from the audio output on your computer to
the audio input on the iQuake-52 amplifier.
2) Toggle through the input selector until you hear the audio.
300-XX Amplifier
Line Level
Input
To Computer Audio Output
Left (White)
Right (Red)
RCA to Mini (c)
iQuake-52 Amplifier
Shell Shoxx Manual 11Specifications are subject to change without notice
If You Are Using a Video Game Console with iQuake-52
SUB -OUT
Serial Nu mber:
Aux AC Out let
120 VAC 60 Hz 0.2 A
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTI ON
O
.
f
c
n
N
l
o
,
r
a
t
h
c
i
r
A
e
m
C
US
VOLUME
INPUT
SELECTOR
LINE IN
L
R
OUTPUT
TO
SPEAKER
S-VIDEO
OUT
POWER
ON OFF
ESC 2727 McCone Avenue Hayward California U.S.A.
AUX
INPUT
USB
100- 120V AC 60 Hz T2AL 25 0V 220- 240V AC 50 Hz T1AL 25 0V
AC Se lect
FUSE
1) Keep the video game console’s audio and video plugged into your TV.
2) Connect an RCA cable (not supplied) from the audio output of your TV to
the audio input of the iQuake-52 amplifier.
3) Toggle through the input selector until you hear the audio.
300-XX Amplifier
Line Level
To TV Audio Output
Left (White)
Right (Red)
Input
RCA to RCA (not supplied)
iQuake-52 Amplifier
Connecting a MiniMe Subwoofer to Your iQuake-52
SUB -OUT
Serial Nu mber:
Aux AC Out let
120 VAC 60 Hz 0.2 A
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTI ON
O
.
f
c
n
N
l
o
,
r
a
t
h
c
i
r
A
e
m
C
US
VOLUME
INPUT
SELECTOR
LINE IN
L
R
OUTPUT
TO
SPEAKER
S-VIDEO
OUT
POWER
ON OFF
ESC 2727 McCone Avenue Hayward California U.S.A.
AUX
INPUT
USB
100- 120V AC 60 Hz T2AL 25 0V 220- 240V AC 50 Hz T1AL 25 0V
AC Se lect
FUSE
For the highest impact system, use Earthquake’s MiniMe subwoofer and Shell Shoxx at the same time.
1) Connect the male end of the RCA Y Adaptor (e) into the subwoofer output
of the iQuake-52 amplifier.
2) Connect the RCA female to male cable (d) from the Y adaptor to Shell
Shoxx’s left audio input.
3) Connect an RCA single male to male cable (not supplied) from the Y
adaptor to MiniMe’s left audio input.
MiniMe Amplifier
Left (White)
Right (Red)
RCA Input
iQuake-52 Amplifier
RCA Y Adaptor (e)
Line Level
300-XX Amplifier
RCA female to male (d)
Left (White)
Right (Red)
Input
Shell Shoxx Manual 13Specifications are subject to change without notice
Specifications
Model No. MQB-XX
Frequency Response 15 - 50Hz
Impedance 8-ohm
Power 20 - 500W
Pipe Size 1.1” - 1.5” (28mm - 38mm)
Dimensions Height: 3-1/2” (89mm)
Width: 2-3/4” (70mm)
Depth: 8-1/2” (216mm)
Model No. 300-XX
Frequency Response 28 - 175Hz
Output Power 4-ohm load: 320WRMS
8-ohm load: 160WRMS
Power Line Voltage 110 - 120C ~ AC/60Hz/180W
(220 option)
Input Sensitivity for Full Output
Input Impedance 10Kohm
Dimensions Height: 9-1/2” (241mm)
Width: 13-3/16” (335mm)
Depth: 3-1/4” (82mm)
max/min: 0.2V/1.7V
1 Year Limited Warranty
Shell Shoxx (1) year limited warranty:
Earthquake warrants the original purchaser that the speaker or amplifier (product) is free from defects in material and workmanship, under normal and proper use, for a period of one (1) year from the date of purchase (as shown on the original bill of sale with serial number affixed/written on it). The one (1) year warranty period is valid only if the product is properly installed by an Earthquake authorized party, and the warranty registration card is properly filled out and sent to Earthquake Sound Corporation. If the product is installed by a non-
authorized dealer, a thirty (30) day warranty period applies.
(A) One (1) year limited warranty guidelines: (If installed by an authorized Earthquake dealer) First year: Earthquake pays for labor, parts, and ground freight (only in US mainland) back to
(B) Warning:
• Products (sent for repair) that are tested by Earthquake technicians and deemed to have no
• Each product sent for repair
© Earthquake agrees to repair or replace - at our option - all such defective products/parts subject to the following provisions:
• Defective products/parts have not been altered or repaired by other than an Earthquake factory
• Products/parts are not subjected to negligence, misuse, improper use, or accident, damaged by
(D) Warranty Limitations: Earthquake warranty does not cover products that have been modified or abused. Including but not limited to the following:
• Damages to speaker cabinet and cabinet finish due to misuse, abuse, or use of improper use of
• Bent speaker frame, broken speaker connectors, holes in speaker cone, surround & dust cap,
• Fading, deterioration of speaker components & finish due to improper exposure to elements.
• Bent amplifier casing, damaged finish on the casing due to abuse, misuse, or improper use of
• Burnt tracers on PCB.
• Product/part damaged due to poor packaging or abusive shipping conditions.
• Subsequent damage to other products. A warranty claim will not be valid if the warranty registration card is not properly filled & returned to Earthquake with a copy of the purchase receipt.
(E) Service Request: To receive product(s) service, contact Earthquake service department at (510) 732-1000 and request an RMA number (Return Material Authorization), items shipped without a valid RMA number will be refused. Make sure you provide us with your complete/correct shipping address, a valid phone number, and a brief description of the problem you are experiencing with the product. In most cases, our technicians might be able to resolve the problem over the phone, thus eliminating the need to ship the product.
(F) Shipping Instructions: Product(s) must be packaged in its original protective box(es) to minimize transport damage and avoid repackaging charges. Shipper claims regarding items damaged in transit must be presented to carrier. Earthquake Sound Corporation reserves the right to refuse products that are improperly packaged. A copy of the purchase receipt must accompany product returned for service. We encourage you to include with the package a written description of the problem. Ship product to: Earthquake Sound Corp. 2727 Mc Cone Avenue, Hayward, CA 94545. Ph (510) 732-1000. You are responsible for the cost of shipping the product to Earthquake Sound Corporation.
(G) Disputes Resolution: All disputes - between clients and Earthquake Sound Corporation - resulting from the one (1) year limited warranty policy must be resolved according to the laws & regulations of the county of Alameda, California.
customer.
problem, will not be covered by the limited warranty. Customer will be charged a minimum of one (1) hour of labor (ongoing rates) plus shipping charges back to customer.
repackaging charge in addition to labor, parts and shipping charges.
approved technician.
improper line voltage, used with incompatible products, or have its serial number or any part of it altered, defaced or removed, or have been used in any way that is contrary to Earthquake’s written instructions.
cleaning materials/methods.
burnt speaker voice coil.
cleaning material.
must be packaged in its original packaging. Otherwise, there will be
Shell Shoxx Manual 15Specifications are subject to change without notice
The Sound That Will Move You.
Earthquake Sound reserves the right to amend details of the
specifications without notice.
© Copyright Earthquake Sound Corporation
Earthquake Sound Corporation
2727 McCone Avenue, Hayward CA, 94545
Phone: (510) 732-1000 Fax: (510) 732-1095
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use