EarthQuake MINIME P8V2, MINIME P8WV2, MINIME P63 User Manual

The Sound That Will Move You
MINIME P8V2/
P8WV2
USERS MANUAL
Earthquake Sound Corp. | (510) 732-1000 | U.S. Toll Free: (800) 576-7944 | www.earthquakesound.com
Table of Contents
About Earthquake Sound Corporation..................................................
Safety Instructions.................................................................................
Introduction...........................................................................................
What Makes a MiniMe?..........................................................................
Control Panel Overview.........................................................................,
Placing Your Subwoofer(s)...................................................................
Connecting Your Subwoofer(s)..............................................................
Adjusting Your Subwoofer(s)..................................................................
Dimensions and Specifications..............................................................
Warranty Information.............................................................................
For Your Records..................................................................................
3
4 - 5
6
6
7 - 8
9
14
15
18
S O U N D
The Sound That Will Move You
Earthquake Sound Corporation
2727 McCone Avenue Hayward, CA 94545
United States of America Tel: 510-732-1000 Fax: 510-732-1095
© 2014 Earthquake Sound Corporation. All rights reserved. This document should not be construed as a commitment on the part of Earthquake Sound Corporation. The information is subject to change without notice. Earthquake Sound Corporation assumes no responsibility for errors that may appear within this document.
WARNING: This product is capable of generating high sound pressure levels. You should exercise caution when operating these speakers. Long
term exposures to high levels of sound pressure will cause permanent damage to your hearing. Sound pressure levels exceeding 85dB can be dangerous with constant exposure, set your audio system to a comfortable loudness level. Earthquake Sound Corporation does not assume liability for damages resulting from the direct use of Earthquake Sound audio product(s) and urges users to play volume at moderate levels.
Earthquake Sound Corp. | (800) 576-7944 | www.earthquakesound.com2 MiniMe ManualP8V2/P8WV2
About Earthquake Sound Corporation
For over 28 years, Earthquake Sound has been producing a variety of high quality audio products that have impressed audiophile communities around the world. It all started in 1984 when Joseph Sahyoun, a music freak and Aerospace Engineer unhappy with the existing loud speaker technology and performance, decided to put his advance engineering knowledge to use. He pushed technological boundaries to the limit to create the kind of subwoofer he could live with. Earthquake quickly created a name for itself in the car audio industry and became well known for its powerful subwoofers and amplifiers. In 1997, using his existing expertise in the audio industry, Joseph Sahyoun expanded his company to home audio production.
Earthquake Sound has since evolved into a leader in the home audio industry, producing not only subwoofers and amplifiers but surround speakers and tactile transducers as well. Engineered by audiophiles for audiophiles, Earthquake Sound audio products are meticulously crafted to reproduce each and every single note perfectly, bringing your home theater experience to life. With true dedication and full attention to details, Earthquake Sound engineers continuously develop new and better products to meet customers’ needs and go beyond their expectations.
From mobile audio to prosound and home audio, Earthquake Sound has been selected as the winner of many prestigious awards based on sound quality, performance, value and features. CEA and numerous publications have awarded Earthquake Sound with over a dozen design and engineering awards. Additionally, Earthquake Sound has been granted many design patents by the USPO for revolutionary audio designs that have changed the sound of the audio industry.
Headquartered in a 60,000 square foot facility in Hayward, California USA, Earthquake Sound currently exports to over 60 countries worldwide. In 2010, Earthquake Sound expanded its export operations by opening a European warehouse in Denmark. This accomplishment was recognized by the US Department of Commerce who honored Earthquake Sound with an Export Achievement award at the 2011 Consumer Electronic Show. Just recently, the US Department of Commerce presented Earthquake Sound with another Export Achievement award for expanding its export operations in China.
Joseph Sahyoun, US Secretary of Commerce Gary Locke,
Abraham Sahyoun and Thomas Mygind
Specifications are subject to change without notice.
US Commercial Officer Sarah Fox and Joseph Sahyoun
MiniMe Manual 3P8V2/P8WV2
Safety Instructions
Safety First
This documentation contains general safety, installation, and operating instructions for the MiniMe P8V2/ subwoofer. It is important to read this user’s manual before attempting to use this product. Pay particular attention to the safety instructions.
P8WV2
Symbols Explained:
Appears on the component to indicate the presence of uninsulated, dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.
Calls attention to a procedure, practice, condition or the like that, if not correctly performed or adhered to, could result in injury or death.
Calls attention to a procedure, practice, condition or the like that, if not correctly performed or adhered to, could result in damage to or destruction of part or all of the product.
NOTE:
Calls attention to information that is essential to highlight.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. The grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments and accessories specified by the manufacturer.
12) Use only a compatible rack or cart for the final resting position.
13) Unplug this apparatus during lightning storms
or when unused for a long period of time.
14) Refer all servicing to qualified service
personnel. Servicing is required when the apparatus has been damaged in a way such as: power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Important Safety Instructions:
1) Read these instructions in their entirety.
2) Store this manual and packaging in a safe place.
3) Heed all warnings.
4) Follow instructions (do not take shortcuts).
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatuses that produce heat.
4 MiniMe ManualP8V2/P8WV2
Earthquake Sound Corp. | (800) 576-7944 | www.earthquakesound.com
15) To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
System Installation Considerations
There are several factors to consider before installing Earthquake Sound’s MiniMe P8V2/P8WV2 Subwoofer.
?What are the intended listening zones?
?From where in each zone will the listener prefer
to control the system? Where will the subwoofer be located?
? Where will the source equipment be located?
Connection Tips
?Keep all power cords away from all signal cables to
prevent humming from induced noise.
?Choose reliable signal cable cords (Earthquake
Sound also specializes in high performance RCA cables and patches).
?All speaker wires that are ran through the walls
should be twisted type to reduce potential hum noise pick-up.
?It is best to use a grounded electrical outlet to
power the amplifier. Lack of input ground reference could be unsafe. Consult with your electrical contractor about proper grounding.
Safe & Proper handling
The MiniMe P8V2 subwoofer is considerably light weight and easy to maneuver. However, we encourage you to take precaution when unpacking the unit to prevent any possible damage to your MiniMe P8V2 /P8WV2 . We further suggest the following:
?Do not apply pressure or push against the face of
the speaker as this will cause irrepairable damage to the cone and suspension.
/P8WV2
Unpacking the MiniMe P8 /P8WV2
?Keep the original carton and packing materials for
V2
future shipment or storage.
?Check for any visual signs of damage. If you
encounter any concealed damage, consult your Earthquake Sound dealer before proceeding with unit installation.
?Retain the sales receipt as it establishes the
duration of the limited warranty and provides information for insurance purposes.
The MiniMe is packaged well for safety.
We highly
suggest having a padded surface when unpacking it .
Step 1:
On a padded surface, carefully place the box on its side to remove the bottom packing tape and staples.
Step 2:
Without tilting the box too much, tug the bottom flaps outward and keep the protective foam in place.
?When carrying the MiniMe P8V2/P8WV2, make
sure that the speakers/grilles are away from your chest, eliminating the chance of pushing against the face of the speaker.
?Do not drop the MiniMe P8V2/P8WV2 or subject it to
sudden shocks. This will damage the external finish and weaken the enclosure, creating air leaks.
?Avoid exposing the MiniMe P8V2/P8WV2 to
moisture. Water will damage the structure as well as the amplifier and speakers.
?Cleaning the MiniMe P8V2/P8WV2 is best done
using soft cloth. If needed, use mild detergent with water. Like any other electrical unit, always unplug the unit before cleaning it.
This triangle, which appears on your component,
alerts you to the presence of uninsulated,
dangerous voltage inside the enclosure -
voltage that may be sufficient to
constitute a risk of shock.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Step 3:
Gently reposition the box upright.
Step 4:
Slide the box off, minding the protective foam on the top, bottom and sides of the subwoofer.
This triangle, which appears on your component,
alerts you to important operating and
maintenance instructions in this
accompanying literature.
Specifications are subject to change without notice.
MiniMe Manual 5P8V2/P8WV2
Introduction
The MiniMe system is designed to dramatically enhance your enjoyment of music and films at home by adding power and impact to low frequency sound effects without taking up your entire living space. Congratulations and thank you for choosing the Earthquake MiniMe subwoofer as a key component of your audiophile system.
P8V2/P8WV2
The MiniMe subwoofer utilizes an advanced digital class “D” amplifier, an 8” premium long throw driver and an 8” passive radiator with patented SLAPS (Symmetrically Loaded Audio Passive System) Technology. With a ported design and piano gloss enclosure, the MiniMe subwoofer delivers phenomenal bass.
Designed in the USA, the MiniMe subwoofer meets and exceeds all industry standards of performance and quality. With uncompromised “World Class” performance and superior technology, the MiniMe subwoofer embodies both power and elegance.
P8V2/P8WV2
P8V2/P8WV2
P8V2/P8WV2
P8V2/P8WV2
What Makes a MiniMe?
Digital Class “D” Amplifier SLAPS (Symetrically Loaded Audio
Passive System)
The MiniMe a m p l i f i e r u t i l i z e s t h e advanced class “D” circuitry with over 90% efficiency, allowing it to continuously perform without getting hot.
The 320-Watt peak power amplifier is fully equipped with 50 - 160Hz frequency
adjustment control, 0 - 180° phase adjustment, low level RCA input, auto signal sensing, as well as high level speaker inputs and outputs.
P8V 2/P8WV2
Earthquake’s own patented SLAPS passi v e rad i a to r te c hn o lo g y dr a mat ica l ly increases the subwoofer’s efficiency and capability for u l t r a l o w f r e q u e n c y reproduction. The unique design of the SLAPS employs
dual (identical) suspensions, allowing the passive driver to move the same amount of air in either direction. Coupled with the active driver, the SLAPS enables the sub to deliver louder bass without using more power from the amplifier.
Premium Long Throw Drivers
The active driver installed in every MiniMe is spe c i f ically de signed fo r accurate reproduction of bass and sub-bass frequencies.
Built with TCT (Turbine Cooled Tr a ns du c er ) Tec hn ol o gy,
stitched tensile leads, anti­wobble cone construction and reinforced dust cap, the MiniMe driver effortlessly produces phenomenal bass with extremely low distortion while staying cool the entire time.
6 MiniMe ManualP8V2/P8WV2
P8V2/P8WV2
P8V2/P8WV2
Earthquake Sound Corp. | (800) 576-7944 | www.earthquakesound.com
Luxurious Piano Gloss Cabinet
The deep luxurious piano lacquer begins with a thorough sanding and priming, followed by multiple applications of black or white lacquer with additional fine sanding between each layer, and finished with a smooth, high gloss clear coat.
When it comes to elegance and style, the MiniMe
P8V2/P8WV2
delivers.
Loading...
+ 14 hidden pages