EarthQuake MiniMe DSP P12, MiniMe DSP P10 User Manual

The Sound That Will YouMove

MINI EM DSP P10/P12

SER S ANUAL

U’M

Earthquake Sound Corp. | [phone] | U.S. Toll Free: [phone] | www.earthquakesound.com

Table of Contents

About Earthquake Sound Corporation..................................................

Safety Instructions.........................................................................

Connection Tips.....................................................................................

Introduction..................................................................................

What Makes a MiniMe?........................................................................

Control Panel Overview.......................................................................,

Placing Your Subwoofer(s).....................................................................

Connecting Your Subwoofer(s)..............................................................

Room Tuning With iWoofer™ App..........................................................

Dimensions and Specifications..............................................................

Warranty Information.............................................................................

For Your Records..................................................................................

3

4

5

6

6

7 - 8

9

10

11 - 13

14 - 15

16 - 17

18

WARNING: This product is
capable of generating high
sound pressure levels. You
should exercise caution when

SOUND

The Sound That Will YouMove

Earthquake Sound Corporation

2727 McCone Avenue
Hayward, CA 94545

United States of America
Tel: [phone]
Fax: [phone]

© 2018 Earthquake Sound Corporation. All rights reserved.
This document should not be construed as a commitment on the part of Earthquake Sound Corporation.
The information is subject to change without notice.
Earthquake Sound Corporation assumes no responsibility for errors that may appear within this document.

Earthquake Sound Corp. | [phone] | www.earthquakesound.com2 MiniMe DSP P10/P12

sound pressure will cause permanent
damage to your hearing. Sound pressure
levels exceeding 85dB can be dangerous
with constant exposure. Set system to a
comfortable loudness level. Earthquake
Sound Corporation does not assume
liability for damages resulting from the
direct use of Earthquake Sound audio
product(s) and urges users toplay volume at
moderate levels.

operating these speakers. Long
term exposures to high levels of

About Earthquake Sound Corporation

For over 28 years, Earthquake Sound has been producing a variety of high quality audio products that have
impressed audiophile communities around the world. It all started in 1984 when Joseph Sahyoun, a music freak and
Aerospace Engineer unhappy with the existing loud speaker technology and performance, decided to put his
advance engineering knowledge to use. He pushed technological boundaries to the limit to create the kind of
subwoofer he could live with. Earthquake quickly created a name for itself in the car audio industry and became well
known for its powerful subwoofers and amplifiers. In 1997, using his existing expertise in the audio industry, Joseph
Sahyoun expanded hiscompany to homeaudio production.

Earthquake Sound has since evolved into a leader in the home audio industry, producing not only subwoofers and
amplifiers but surround speakers and tactile transducers as well. Engineered by audiophiles for audiophiles,
Earthquake Sound audio products are meticulously crafted to reproduce each and every single note perfectly,
bringing your home theater experience to life. With true dedication and full attention to details, Earthquake Sound
engineers continuously develop new and better products to meet customers’ needs and go beyond their
expectations.

From mobile audio to prosound and home audio, Earthquake Sound has been selected as the winner of many
prestigious awards based on sound quality, performance, value and features. CEA and numerous publications
have awarded Earthquake Sound with over a dozen design and engineering awards. Additionally, Earthquake
Sound has been granted many design patents by the USPTO for revolutionary audio designs that have changed
the sound ofthe audio industry.

Headquartered in a 60,000 square foot facility in Hayward, California USA, Earthquake Sound currently exports to
over 60 countries worldwide. In 2010, Earthquake Sound expanded its export operations by opening a European
warehouse in Denmark. This accomplishment was recognized by the US Department of Commerce who honored
Earthquake Sound with an Export Achievement award at the 2011 Consumer Electronic Show.Just recently, the US
Department of Commerce presented Earthquake Sound with another Export Achievement award for expanding its
export operations inChina.

Joseph Sahyoun, US Secretary of Commerce Gary Locke,

Abraham Sahyoun and Thomas Mygind

Specifications are subject to change without notice.

US Commercial Officer Sarah Fox and Joseph Sahyoun

MiniMe DSP P10/P12 3

Safety Instructions

Safety First

This documentation contains general safety,
installation, and operating instructions for the
MiniMe DSP P10/P12 subwoofer. It is important to
read this user’s manual before attempting to use
this product. Pay particular attention to the safety
instructions.

Symbols Explained:

Appears on the component to
indicate the presence of
uninsulated, dangerous voltage
inside the enclosure – voltage that
may be sufficient to constitute a
risk of shock.

Calls attention to a procedure,
practice, condition or the like that,
if not correctly performed or
adhered to, could result in injury
or death.

Calls attention to a procedure,
practice, condition or the like that,
if not correctly performed or
adhered to, could result in
damage to or destruction of part or
all of the product.

NOTE:

Calls attention to information that
is essential to highlight.

9) Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. The
grounding-type plug has two blades and a third
grounding prong. The wide blade or the third
prong is provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.

10) Protect the power cord from being walked on or
pinched, particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.

11) Only use attachments and accessories
specified by themanufacturer.

12) Use only a compatible rack or cart for the final
resting position.

13) Unplug this apparatus during lightning storms

or when unusedfor a longperiod of time.

14) Refer all servicing to qualified service

personnel. Servicing is required when the
apparatus has been damaged in a way such
as: power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, orhas been dropped.

Important Safety Instructions:

1) Read these instructions in their entirety.

2) Store this manual and packaging in a safe
place.

3) Heed all warnings.

4) Follow instructions (do not take shortcuts).

5) Do not use this apparatus near water.

6) Clean only with a dry cloth.

7) Do not block any ventilation openings. Install in
accordance with themanufacturer’s instructions.

8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatuses that produceheat.

4 MiniMe DSP P10/P12

Earthquake Sound Corp. | [phone] | www.earthquakesound.com

15) To reduce the risk of fire or electric shock, do not
expose this apparatusto rain ormoisture.

System Installation Considerations

There are several factors to consider before
installing Earthquake Sound’s MiniMe DSP

/P12

P10 Subwoofer.

 What are the intended listening zones?

 From where in each zone will the listener prefer

to control the system? Where will the subwoofer
be located?

 Where will the source equipment be located?

Connection Tips

 Keep all power cords away from all signal cables to

prevent humming frominduced noise.

 Choose reliable signal cable cords (Earthquake

Sound also specializes in high performance RCA
cables and patches).

 All speaker wires that are ran through the walls

should be twisted type to reduce potential hum
noise pick-up.

 It is best to use a grounded electrical outlet to

power the amplifier. Lack of input ground
reference could be unsafe. Consult with your
electrical contractor aboutproper grounding.

Safe & Proper handling

The MiniMe DSP P10/P12 subwoofer is considerably
light weight and easy to maneuver. However, we
encourage you to take precaution when unpacking
the unit to prevent any possible damage to your
MiniMe DSP.We further suggest the following:

 Do not apply pressure or push against the face of

the speaker as this will cause irreparable damage
to the coneand suspension.

Unpacking the MiniMe DSP P10/P12

 Keep the original carton and packing materials for

future shipment orstorage.

 Check for any visual signs of damage. If you

encounter any concealed damage, consult your
Earthquake Sound dealer before proceeding with
unit installation.

 Retain the sales receipt as it establishes the

duration of the limited warranty and provides
information for insurancepurposes.

e MiniMe is packaged well for safety. We highly

Th

suggest having apadded surface whenunpacking it.

Step 1:

On a padded surface, carefully place the box on its
side to removethe bottom packingtape and staples.

Step 2:

Without tilting the box too much,
tug the bottom flaps outward and
keep the protectivefoam in place.

 When carrying the MiniMe DSP, make sure that

the speakers/grilles are away from your chest,
eliminating the chance of pushing against the face
of the speaker.

 Do not drop the MiniMe DSP or subject it to

sudden shocks. This will damage the external
finish and weaken the enclosure, creating air
leaks.

 Avoid exposing the MiniMe DSP to moisture.

Water will damage the structure as well as the
amplifier and speakers.

 Cleaning the MiniMe DSP is best done using soft

cloth. If needed, use mild detergent with water.
Like any other electrical unit, always unplug the
unit before cleaningit.

This triangle, which appears on your component,

alerts you to the presence of uninsulated,

dangerous voltage inside the enclosure -

voltage that may be sufficient to

constitute a risk of shock.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Step 3:

Gently reposition thebox upright.

Step 4:

Slide the box off, minding
the protective foam on
the top, bottom and sides o f
the subwoofer.

This triangle, which appears on your component,

alerts you to important operating and

maintenance instructions in this

accompanying literature.

Specifications are subject to change without notice.

MiniMe DSP P10/P12 5

Introduction

The MiniMe DSP system is designed to dramatically
enhance your enjoyment of music and films at home by
adding power and impact to low frequency sound
effects without taking up your entire living space.

Congratulations and thank you for choosing the
Earthquake MiniMe subwoofer as a keyDSP P10/P12
component of your audiophile system.

The MiniMe subwoofer utilizes anDSP P10/P12
advanced digital class “D” amplifier, a premium long
throw driver and a mass tuned passive radiator with
patented SLAPS (Symmetrically Loaded Audio
Passive System) Technology. With a ported design and
piano gloss enclosure, the MiniMe DSP

What Makes a MiniMe?

Digital Class “D”Amplifier

The ini e amplifierMMDSP
utilizes the advanced class
“D” circuitry with over 90%
efficiency, allowing it to
continuously perform
without getting hot.

The 600-Watt peak power
amplifier is fully equipped
with IR input, auto room

tuning adjustments, 0 - 180°
phase switch, low level RCA inputs & outputs, auto
signal sensing, iWoofer app controlled auto room
correction.

P10/P12 subwoofer delivers phenomenal bass. The all

new iWoofer™ interface allows for automatic
professional room tuning for full control of the DSP from
a mobile device.

Designed in the USA, the MiniMe DSP P10/P12
subwoofer meets and exceeds all industry standards
of performance and quality. With uncompromised
“World Class” performance and superior technology,
the MiniMe subwoofer embodies bothDSP P10/P12
power and elegance.

Mass Tuned SLAPS (Symetrically
LoadedAudio Passive System)

Earthquake’s own patented
SLAPS passive radiator
technology dramatically
increases the subwoofer’s
efficiency and capability for
ultra low frequency
reproduction. The unique
design of the SLAPS employs

dual (identical) suspensions,
allowing the passive driver to move the same amount
of air in either direction. Coupled with the active
driver, the SLAPS enables the sub to deliver louder
bass without usingmore power fromthe amplifier.

Premium Long Throw Drivers

The active driver installed in
every MiniMe isDSP P10/P12
specifically designed for
accurate reproduction of bass
and sub-bass frequencies.

Built with TCT (Turbine Cooled
Transducer) Technology,

stitched tensile leads, anti­wobble cone construction and reinforced dust cap,
the MiniMe driver effortlesslyDSP P10/P12
produces phenomenal bass with extremely low
distortion while stayingcool the entiretime.

Earthquake Sound Corp. | [phone] | www.earthquakesound.com6 MiniMe DSP P10/P12

Luxurious Piano Gloss Cabinet

The deep luxurious black piano lacquer begins with a
thorough sanding and priming, followed by multiple
applications of black lacquer with additional fine
sanding between each layer, and finished with a
smooth, high glossclear coat.