Earbuds G11-JL User Manual

G11-JL

User Manual

I

Main user interface

A.Contact Charging point

B.Function Button

C.Microphone

D.Charging USB Port

E.Charging Status LED

F.Power On/Off

Start Here

II

a. Open Charging Dock case,

take out the earbuds

b. Automatic Pairing

Press and hold 2s

For initial use, put two earbuds within
10cm, press and hold the buttons for
2s to turn on, the LEDs will flash for
seveval seconds and waiting for pairing.
when the LED of Right earbud flashes
and Left earbud LED off it means two
earbuds successfully paired.
(Voice Notice: Power on --->
TWS Connected)

pairing --->

c. Pairing with cellphone

Bluetooth

Turn on Bluetooth

Device name

Available Devices

G11-JL-R

d. Power off

Press and hold for 5s

Available Devices

G11-JL-R

Turn on cellphone bluetooth and set it as Open
detection, when “G11-JL-R” appears in available
devices, press to connect. The LED flash in
Blue continuously after connected.(please don’t
connect“G11-JL-L”when it appears）
(Voice Notice: Connected)

Press and hold 5s the function button for
either earbud, two earbuds will be powered
off at the same time.

(Voice Notice: Power off)

Charging

III

IV

More functions

Power on/off
Micro USB
Charging Port

a.The LED flashes in Red and there is a

Voice Notice when the Battery Power Low.

b.Press the Power On/Off button before

charging.

c.Without external power, the charging dock to

charge the earbuds, earbuds & right LED of
charging dock on in red, and will be off after
fully charged.

d.With external power to charge the charging

dock and earbuds, earbuds LED on in red,
Left LED of charging dock flashes in blue,
after fully charged, Earbuds LED off, Left
LED of charging dock on in blue.

a.Press the function button once to answer

Function
Button

calls, Press Function Button twice to
reject calls.

b.In music mode,Press function button once

to pause,Press Right function button twice
to play next song. Press Left function
button twice to play previous song.

c.Press Right function button three times to

increase volume. Press Left function button
three times to decrease volume.

d.Press and hold either function button for 2s

to activate Siri.

Right/Left earbud use individually

V

Press and hold 2s

Default Setting recovery

VI

Press twice

a.The earbuds can be used individually (each earbud pairs

to separate cellphone)

b.Before using individually,please make sure to erase all

existing“G11-JL”pairing record.

c.To use right earbud individually,press function button for

2s,the LED flash in blue,turn on cellphone bluetooth to
search,and connect when“G11-JL-R”available.After
concected,the LED flashes in blue.
(Voice Notice:Pairing--->connected)

d.To use left earbud individually,press function button for

2s,the LED flash in blue,turn on cellphone bluetooth to
search,and connect when“G11-JL-L”available.After
concected,the LED flashes in blue.
(Voice Notice:Pairing--->connected)

e.After used either earbud individually and want to use the

earbuds as one pair, please make sure to erase all existing
"G11-JL"in your phone before pairing again.

1stly： make sure the earbuds don’t connect
any bluetooth devices.
2ndly：put two earbuds close within 10cm and
press & hold two function buttons for 2s.
3rdly：press the function button of the right
earbud twice,when Right LED flashes,
Left earbud LED off,auto pairing completed.
4thly：presss & hold either function button for 5s,
two earbuds turn off at the same time,
manual pairing completed.

Basic Parameter

Product Name：G11-JL Operation range：10m

Charging time：1.5 hours Call time：4 hours

Music Time：3 hours

Battery Type：Polymer Li-Ion B attery Earbud weight：6g+6g

Charging Input：5V 300mA

Important Notice

Please make sure t he product is f ully charged bef ore initial use .

Please use the brand adaptor c omplying safe ty requirements to c harge

this product .

If your cellphone can not find “ G11-JL-R”, pleas e double c heck if your

cellphone Bluetoot h is at “ Equipment visible mode”. After init ial pairing,

the earbuds will automat ically pair for repeat use. If no use f or a long

time, need t o follow up pairing proc edures to pair with t he cellphone.

If there is only one earbud has sound while in mus ic mode, please

restart the earbuds or re-pair manually.

Security warning

Please use t he product in the t emperature between 0 C-45 C . When

the enviroment temperature is too high or low, it may cause t he

product malfunction.

Please keep the product dry, do not contact water

or humidity enviroment

Please do not drop, throw, pull/drag t he product to prevent damage.

Please power off bef ore clean the product .

Please use t he product at proper volume while list ening music or

answering call, long time at high volume usage could lead to

permanent hearing loss.

The built in battery is not dismount able, please do not replace by

yourself. If it's really necessary, please ask help from authorized

service center.

Please dispose the product according t o local law, can not treat it as

domestic garbage.

Without adult supervision, please keep t he product out o f reach of

children, the swallow of small components included may cause

asphyxia.

Warranty

This product is covered under warranty for a period of oneyear from

the date of purchase limited to normal use and maintenance of the machine

parts, materials and functions. Problems and failures verified upon fur-

ther identification, will be provided free repair and replacement parts.

Limited to the following:

A. Headset is beyond the warranty period;

B. User does not follow the instructions. so that the headphone wire and

earplug broken.

C. Without the authorization to dismount, repair, alteration structures;

D. Can’t provide proof of purchase.

E. Man made damage.

F. Due to natural disasters and other force majeure (such as

earthquakes, fires) product failure of damage causes;

Warranty Card

Use r’ s name

Use r’ s telephone#

Use r’ s Ad d

Date of purchase

Invoice #

Dealer’s name

Dealer’s Add

Dealer’s telephone#

QC Report info

Model #

Inspector

Date

V1.1(EN)

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital devic e, pu rs ua n t to P art 1 5 of the FCC Rule s . The s e limits are designed to provide
reasonable protection against harmful interference in a residential installa t ion . Th is equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenn a.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be u
sed in portable exposure condition without restriction

FCC ID: 2AQ9XG11-JL