Eago TB133 Certification

IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a
combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the
supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in
the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product
acceptance by Authorities Having Jurisdiction.

The most updated information on this Certificate of Listing is available online at pld.iapmo.org

Effective Date: June 2016 Void After: June 2017

Product: Ceramic Plumbing Fixtures File No. 4773

Issued To: Foshan Nanhai Eago Sanitary Ware Co. Ltd.

Shiling Industry District
Xiaotang Town, Nanhai Zone
Foshan City, GUANGDONG, 528222
China

Identification: Ceramic Plumbing Fixtures shall be marked with the manufacturer's name

or registered trademark, or in the case of private labeling, the name
of the customer for whom the fixture was manufactured. Markings shall
be permanent, legible, and visible after installation.

The model number of close-coupled water closets shall be marked on both
the tank and the bowl.

Water closets and urinals shall be marked to identify the average water
consumption, expressed in litres and gallons per flush. The litre or
gallon value may be stated first, at the manufacturer's option.

Gravity flush tanks shall be marked with a water level mark or with the
information necessary to determine the water level in the tank needed
to deliver the intended flush volume. This mark shall be applied to the
ceramic body of the tank, the tank liner, or the flush valve overflow

This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material,
manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of
non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing.
Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc.
Any alteration of this certificate could be grounds for revocation of the listing.

Page 2

Product: Ceramic Plumbing Fixtures File No. 4773

Issued To: Foshan Nanhai Eago Sanitary Ware Co. Ltd.

Void After: June 2017

tube. The vertical distance between the water level mark and the lowest
point of the tank overflow channel shall not exceed 38 mm (1.5 in).

Water closet tanks shall have a label indicating at least the following:
(a) the telephone number or contact information of a service department from
which end-users can obtain replacement parts;
(b) the serial or part number of the flush valve seal; and
(c) information on procuring replacement parts for maintaining the original
flush volume.

All packaging shall be marked with the manufacturer's name or registered
trademark; or in case of private labeling, the name of the customer for whom
the fixture was manufactured and the model number. Packaging for water closets
and urinals shall be marked with the water consumption in gpf and Lpf.

Each fixture shall be marked with the cUPC® certification mark. In the case
where the tank and the bowl are sold separately, both shall have the
certification mark.

Fixtures that require proprietary (i.e., non-standard) components, e.g.,
supply fittings, waste fittings, or
water closet seats, shall indicate, in the packaging or the accompanying
literature, that such components
are provided by the manufacturer and shall identify the proper replacement
parts.

Fixtures that do not comply with one or more of the dimensional requirements
of this Standard shall be
marked with an "N" to indicate the non-standard nature of the fixture.

Characteristics: Ceramic plumbing fixtures may include water closets, lavatories,