Eagle Signal SX210 Catalog Page
EAGLE SIGNAL brand
Electronic Timers
SX210 Microprocessor Digital Timer
Economical,
electronic, single
setpoint reset timer...
with 8 time ranges
and 8 operating
modes
5
E
L
T
The SX210 timer is a microprocessor based digital timer housed in a
E
I
C
standard DIN style case (68mm square cutout). The small case and
M
T
front bezel require minimal panel space yet provide large, easy to use
E
R
programming keys and a .3 inch high LED display.
R
O
S
T
N
■ Eight programmable time ranges and eight output operating modes
I
I
■ Operating modes and all other setup functions programmed with
M
C
E
miniature rocker switches located on the back of the housing
R
■ Nonvolatile RAM memory retains setpoint, actual time values, and
S
program parameters (10 year expected life of data in memory)
■ NEMA 4 Hosedown Test rated
■ Special surface just below the display on which the function can be
marked with pen or pencil
■ SET and ENT keys provide access to setpoint and front panel
programmed functions
■ Programming changes entered via increment and decrement keys
■ Keypad "lock" function allows setpoint to be viewed, but does not
allow unauthorized changes
■ Four .3 inch red LED displays for easy readability
■ Flashing LED (right side of display) indicates unit is in timing cycle
and LED (left side of display) lights when programmed contacts are
energized
■ Two removable terminal blocks with screw gate style wire clamps
permit prewiring of panel without the timer in place and eliminate
rewiring if unit needs to be removed or replaced
■ Two DPDT relay outputs with five amp contact ratings - one is a set
of instantaneous contacts that energize when timing cycle starts and
remain energized until timer is reset, and the other is a set of
programmable contacts that can be programmed to turn on and off
in several operating modes
®
RECOGNIZED
®
CERTIFIED
SPECIFICATIONS
Time Ranges:
Sym.
Operating Voltage/Frequency: A6 - 120 VAC, 50/60 Hz
B6 - 240 VAC, 50/60 Hz
Setting Accuracy: ±0.05% of setting or 50 ms, whichever is larger
Repeat Accuracy: ±0.001% of setting or 35 ms, whichever is larger
Reset Time: 15 ms
Power on Response: 200 ms max.
Operating Temperature: +32˚ to +122˚F (0˚ to +50˚C)
Output Rating: Relay: 5 amp (resistive), 10 to 264 VAC
Current capacity derates from 7 amps at 250C to 5 amps at 500C with all
output contacts used
Vibration: Unit function is unaffected by 2.5
tude in both directions of the perpendicular mounting axes imposed from
10 to 100 Hz
Static Discharge: Unit function is unaffected by a constant 3600 volt peak,
60 Hz discharge applied to the grounded front plate at a relative humidity
of less than 25%
Transient Protection: Immune to 2500 volts peak transients up to 50
microseconds in duration
Approvals: UL Recognition E96337
CSA Certification LR26861
1
2
3
4
5
6
7
8
Maximum
Range
99.99 Sec.
999.9 Sec.
99.99 Min.
999.9 Min.
99.99 Hr.
999.9 Hr.
99 Min.: 59 Sec.
99 Hr.: 59 Min.
Minimum
Setting
.01 Sec.
.1 Sec.
.01 Min.
.1 Min.
.01 Hr.
.1 Hr.
1 Sec.
1 Min.
G sinusoidal vibration magni-
5.14
DANAHER INDUSTRIAL CONTROLS
Loading...