Eagle Signal SQUIRE Catalog Page

VEEDER-ROOT brand

Electronic Predetermining Counters

SQUIRE Full Featured

P R

I N G

Two-line LCD display with LED backlighting… compact, fits 1/16 DIN panel cutout.

Now operates from 85-260VAC, 50/60Hz or 10-26VDC power source.

A new standard of performance and functionality in a compact preset counter. Four models offer single or dual preset count capability, or a single preset counter with a presettable batch counter.

The backlit LCD display provides simultaneous count and preset indication. The use of annunciators and simple key sequences makes operator changes quick and easy. A variety of count sources are accommodated, including relay and push-button contacts, photocells and proximity switches, and uni- or bidirectional incremental encoders. The solid state outputs can interface to light duty devices and PLCs, while the relay contacts offer heavy duty load switching. Setup and installation is simplified through configuration switches, pluggable terminal strip connectors and a unique "no tools required" panel mount clamp.

■ Two line display indicates Count and Preset values simultaneously

■ Backlit LCD provides high visibility in high or low ambient light

environments

■ Removable terminal strip connectors for easy installation and service

■ Compact design requires only 48 mm of panel space

■ Built-in medium duty, form C (SPDT) relays

■ Accessory sensor power supply

■ Reset to zero or set to a number operation

■ Two level program and preset data security

■ Accepts current sinking or sourcing devices

■ Key reset, remote reset and auto reset available

■ Add / subtract or bidirectional count inputs

■ Nonvolatile RAM provides 10+ years data retention

■ NEMA 4X/IP65 front panel sealing

The Squire family of preset counters combines state of the art circuitry and electronic assembly techniques with an ergonomic package design that results in the most cost effective, high performance counter value on the market.

For LED display, see Series C346 For three presets, see MAX Count 2

SPECIFICATIONS

Display: Transflective LCD, LED backlight; Counter: 6 digit, 7 mm; Preset/

Batch Count: 6 digit, 4 mm; 14 input/output/status indicators

Presets: 6 digits Power Supply: 85 to 260 VAC, 50/60 Hz, 6 VA max.; 10 to 26 VDC, 0.4 A

max.

Count Input: Switch Input: contact closure; 20 Hz max.; 25 ms min. pulse

width

Pulse Input: Sourcing, low: < 2 VDC or open, high: > 3 VDC; 2.4 kHz

max.; 200 µs min. pulse width; 10 kΩ to Common

Pulse Input: Sinking, low: < 2 VDC, high: > 3 VDC or open; 2.4 kHz max.;

200 µs min. pulse width; 4.7 kΩ to +VDC

Count Modes: Add/Subtract (anti-coincidence): Signal A input adds;

Signal B subtracts

Bidirectional Quadrature: Adds when A leads B

Calibrator: 0.0001 to X.XXXX input pulse multiplier Output: Relay output: Form C, 5 amp resistive at 24 VDC or 120 VAC; 3 amp

resistive at 240 VAC; 1/8 H.P. at 120/240 VAC Solid State: NPN Open Collector transistor; 100 mA max.; 30 VDC max. Assignment: Output 1 turns on at Preset 1, turns off at manual Reset;

Output 2 turns on at Preset 2, turns off at manual Reset; (Output 2

turns on at Counter=0, turns off at Reset if switch #3 is down)

Output Time: 0.01 to 99.99 seconds momentary, or latch Reset: Push-button (selectable enable), remote or automatic Accessory Power: 12 VDC ± 25%, 100 mA maximum (AC operation only) Operating Temperature: 32° to 122 °F (-0 to 50 °C) Electrical Connections: Pluggable screw terminals

Count Count Preset Preset Batch Calibrator

Model No. Rate Modes 1 2 Preset & Dec. Pt. SQC1100U 20 Hz add/sub yes no no no

SQC1200U 2.4 kHz a/s, quad yes no no yes SQC2200U 2.4 kHz a/s, quad yes yes no yes SQB2200U 2.4 kHz a/s, quad yes no yes yes

Typical Applications:

2.06

VEEDER-ROOT • EAGLE SIGNAL • DYNAPAR

Item Counting & Batch Control

Reflector

Photocell

Squire Counter

Dimensions:

1.89"

48 mm

5.63"

.16"

4 mm

1.89"

48 mm

.06"

1.5 mm

Panel Cutout: 1.77" x 1.77" (45 mm x 45 mm).

143 mm

5.13"

130 mm