Eagle Signal DG100 Catalog Page
EAGLE SIGNAL brand
CERTIFIED
RECOGNIZED
®
®
FM
APPROVED
Electronic Timers
5
E
L
T
The DG100 is a solid state timer housed in a 1/8 DIN, molded NORYL
E
I
C
case. The timer uses CMOS integrated circuits for the timing function.
M
T
The DG100 series timer is available in 16 time ranges from 3.5 seconds
E
R
to 30 hours. Time is set with a knob referenced to a graduated scale.
R
O
A pilot light on the front of the unit indicates when the unit is timing.
S
T
N
I
I
■ All connections make through standard square base relay socket
M
C
E
■ Available accessories for conversion into panel mount including a
R
version with plug-in capability
S
■ Standard unit functions as ON-Delay timer in sustained start mode
■ Single relay with isolated double pole - double throw relay contact
controls outputs
■ Timer operation can be configured as: interval output timer with
momentary start.
OPERATION
The timing base for the DG100 series timer is generated by an internal
oscillator set by a precision capacitor and a dial adjustable potentiometer.
This allows accurate control over long time ranges.
The unit times as long as power is applied to the control input terminal.
The output contacts change state at the completion of the timing period.
The unit resets when power is removed from the control input.
SPECIFICATIONS
Time Ranges:
Sym.
01
02
03
04
05
06
07
08
Dial
Range
3.5 Sec.
7 Sec.
15 Sec.
30 Sec.
60 Sec.
120 Sec.
4 Min.
8 Min.
Minimum
Setting
.35 Sec.
.7 Sec.
1.5 Sec.
3 Sec.
6 Sec.
12 Sec.
.4 Min.
.8 Min.
Sym.
09
10
11
12
13
14
15
16
Dial
Range
15 Min.
30 Min.
60 Min.
120 Min.
4 Hr.
8 Hr.
15 Hr.
30 Hr.
Minimum
Setting
1.5 Min.
3 Min.
6 Min.
12 Min.
.4 Hr.
.8 Hr.
1.5 Hr.
3 Hr.
DG100 MINIFLEX
®
Solid State Timer
Family of compact
timers... 1/8 DIN
housing mounts in
standard relay socket
®
Operating Voltage/Frequency:
120 VAC (+10 -15%), 50/60 Hz or 120 VDC (+10 -15%)
240 VAC (+10 -15%), 50/60 Hz or 240 VDC (+10 -15%)
24 VAC (+10 -15%) 50/60 Hz or 24 VDC (+10 -15%)
Setting Accuracy: Within ±10% of maximum range
Repeatability (Constant Voltage & Temperature):
±0.1% of setting or 25 ms, whichever is larger
Repeatability (Voltage & Temperature Variation):
Variable Voltage: ±1% of setting
Variable Temperature: ±2% of setting
Variable Voltage and Temperature: ±3% of setting
Reset Time: 50 ms
Cycle Progress: Pilot light during timing
Burden: OFF Time On Time
120 VAC or DC .8 VA max. 4.8 VA max.
240 VAC or DC 1.6 VA max. 4.8 VA max.
24 VAC or DC 1.5 VA max. 2.9 VA max.
Power on Response: 30 ms max. after line voltage applied to pins A and B
Operating Temperature: 0˚ to -60˚C (+32˚ to +140˚F)
Output Rating:
Relay: 10 amp steady state, 120 VAC
Mechanical Life: over 20 million operations
Electrical Life: contingent upon load characteristics
Power Interruption:
Line voltage interruptions of 20 ms or less will not reset unit
Transient Voltage Immunity: Unaffected by 50 microseconds, 600 V peak
transients superimposed on the line input
Vibration: Unit function is unaffected by 2.5
in both directions of three perpendicular mounting axes imposed from 10
to 100 Hz
Approvals: UL Recognition E96337
CSA Certification L26861
FM Approved J10C8A4.AF
G sinusoidal vibration magnitude
5.32
DANAHER INDUSTRIAL CONTROLS
OUTPUT OPERATING MODES
ON-Delay
The unit starts timing when voltage is applied to terminals A and B.
When the dial setting is reached, the output relay energizes and
remains in the energized state as long as voltage is applied to
terminals A and B. Removal of voltage from terminals A and B
resets the unit.
Interval
The unit starts timing with the output relay in the energized state
when voltage is applied to terminals A and B. When the dial setting
is reached, the output relay deenergizes and remains in that state
until voltage is reapplied to terminals A and B. Removal of voltage
from terminals A and B resets the unit.
Up to 0.375
Panel
Thickness
(82.55)
3.250
0.218
(5.54)
2.0 Max
(50.8)
Surface Mount:
MOUNTING
Panel Mount:
(17.45)
0.687
Bezel
DG100 TERMINAL ASSIGNMENTS
A
TIME
4
7
1
6
9
3
B
5
T
E
O
L
T
E
T
I
C
A
M
T
L
E
R
R
I
3.546
O
S
Z
N
I
I
C
N
G
(90)
Panel
Add For
Cutout
+.000
–.040
Each
Additional
Unit
1.722
1.922
(44.0)
(48.8)
0.218
(5.54)
0.165 Typ
(4.19)
1.457
(37.00)
2.992
(75.99)
3.810
(96.77)
1.922
(48.8)
3.622
(92.0)
Up to 0.375
(24.82)
0.980
Panel Thickness
(9.53)
Plug-In Mount:
ORDERING INFORMATION
TIME RANGE
See Specifications for
Time Range Catalog Symbol
3.860
(98.04)
3.250
(82.55)
0.270
(6.85)
Panel
3.812
(96.82)
2.188
(55.57)
4.062
(103.17)
Cutout
+.030
–.060
1.950
(49.53)
DG1 03 A3 02
VOLTAGE &
FREQUENCY
Sym. Description
120 VAC, 50/60 Hz or 120 VDC
A3
240 VAC, 50/60 Hz or 240 VDC
B3
24 VAC, 50/60 Hz or 24 VDC
Z3
3.850
(97.79)
0.984
(24.99)
1.417
(35.99)
1.693
(43.00)
Relay Socket
(2.00)
0.079
Front Dimensions
FEATURES
Sym.
(Blank)
02
Standard, On-Delay, DPDT Relay Output
Interval Timing
Description
DANAHER INDUSTRIAL CONTROLS
1.656
(42)
5.33
Loading...