Eagle Signal DA100 Catalog Page
EAGLE SIGNAL brand
CERTIFIED
RECOGNIZED
®
®
FM
APPROVED
Electronic Timers
5
E
L
T
The DA100 is a solid state ON/OFF repeat cycle timer housed in a 1/8
E
I
C
DIN, molded NORYL
M
T
for the timing function. Sixteen time ranges are available in any
E
R
combination of ON and OFF periods. Two knobs reference to a
R
O
calibrated scale provide the individual time settings. Two front mounted
S
T
N
pilot lights indicate timing status.
I
I
M
C
■ All connections made through standard square base relay socket
E
R
■ Available accessories for conversion into panel mount including a
S
version with plug-in capability
■ Standard unit times its OFF period first and provides an isolated
double pole - double throw relay contact output
■ Available options include ON-Time First timing and One-Cycle
timing (previously required two time delay relays)
OPERATION
The timing base for each of the two timing states (ON time and OFF time)
is generated by an internal oscillator set by a precision capacitor and a dial
adjustable potentiometer. This allows accurate control over the long time
ranges available with the DA100 series.
The DA100 alternately times its OFF and ON periods as long as power is
applied to the control input terminal. The output contacts change state at
the completion of each timing period. The DA100 resets when power is
removed from the control input.
SPECIFICATIONS
Time Ranges:
Sym.
10
11
12
13
14
15
16
17
®
case. The timer uses CMOS integrated circuits
Dial
Range
3.5 Sec.
7 Sec.
15 Sec.
30 Sec.
60 Sec.
120 Sec.
4 Min.
8 Min.
Minimum
Setting
.37 Sec.
.75 Sec.
1.5 Sec.
3 Sec.
6 Sec.
12 Sec.
24 Sec.
48 Sec.
Sym.
18
19
20
21
22
23
24
25
Dial
Range
15 Min.
30 Min.
60 Min.
120 Min.
4 Hr.
8 Hr.
15 Hr.
30 Hr.
Minimum
DA100 MINIFLEX
Operating Voltage/Frequency:
120 VAC (+10 -15%), 50/60 Hz or 120 VDC (+10 -15%)
240 VAC (+10 -15%), 50/60 Hz or 240 VDC (+10 -15%)
24 VAC, 50/60 or 24 VDC
Setting Accuracy: Within ±10% of maximum range
Repeatability (Constant Voltage & Temperature):
±0.1% of setting or 25 ms, whichever is longer
Repeatability (Voltage & Temperature Variation):
Variable Voltage: ±1% of setting
Variable Temperature: ±2% of setting
Variable Voltage and Temperature: ±3% of setting
Reset Time: 65 ms
Cycle Progress: Pilot lights during ON time and OFF time
Power on Response: 30 ms max. after line voltage applied to pins A and B
Operating Temperature: 0˚ to 60˚C (+32˚ to +140˚F)
Output Rating:
Relay: 10 amp steady state
Mechanical Life: over 20 million operations
Electrical Life: contingent upon load characteristics
Power Interruption:
Line voltage interruptions of 20 ms or less will not reset unit
Transient Voltage Immunity: Unaffected by 50 microseconds, 600 V peak
transients superimposed on the line input
Vibration: Unit function is unaffected by 2.5
in both directions of three perpendicular mounting axes imposed from 10
to 100 Hz
Approvals: UL Recognition E96337
CSA Certification L26861
FM Approved J10C8A4.AF
Setting
1.6 Min.
3.2 Min.
6.4 Min.
12.8 Min.
25.6 Min.
51.2 Min.
1.7 Hr.
3.4 Hr.
®
On/Off Repeat Cycle
Continuous repeat
cycle timing in a
compact 1/8 DIN
case... fast, easy
analog dial setpoint
adjustment
G sinusoidal vibration magnitude
5.36
DANAHER INDUSTRIAL CONTROLS
MOUNTING
Panel Mount:
Plug-In Mount:
(17.45)
(24.82)
3.250
(82.55)
0.687
Up to 0.375
Panel
Thickness
0.218
(5.54)
2.0 Max
(50.8)
Panel
Add For
Cutout
+.000
–.040
Each
Additional
Unit
1.722
1.922
(44.0)
(48.8)
0.218
(5.54)
1.457
(37.00)
Bezel
3.810
(96.77)
1.922
(48.8)
3.622
(92.0)
Surface Mount:
0.165 Typ
(4.19)
2.992
(75.99)
3.546
(90)
5
3.250
0.270
(6.85)
4.062
(103.17)
(82.55)
Panel
Cutout
+.030
–.060
3.860
(98.04)
Up to 0.375
0.980
Panel Thickness
(9.53)
3.812
(96.82)
3.850
(97.79)
0.984
(24.99)
1.417
(35.99)
1.693
(43.00)
Relay Socket
(2.00)
0.079
1.656
(42)
Front Dimensions
T
E
O
L
T
E
T
I
C
A
M
T
L
E
R
R
I
O
S
Z
N
I
I
C
N
G
DA100 TERMINAL
ASSIGNMENTS
A
TIME
4
7
1
6
9
3
B
ORDERING INFORMATION
OFF TIME
See Specifications for
Time Range Catalog Symbol
ON TIME
See Specifications for
Time Range Catalog Symbol
2.188
(55.57)
ACCESSORIES
DZ100-51 Bezel Kit for panel mounting. Kit
includes bezel,bezel gasket, brackets and
mounting hardware.
DZ100-52 Strain Relief Kit provides cable
connection to panrl mounted unit. Includes
H11496 strain relief and 4270-0621 socket and
hardware.
DZ100-54 Plug-in Housing for panel mounting
units with plug-in conveinience. Kit includes
housing and mounting brackets.
DZ100-56 Latch and Latch Release Kit for
surface mounting. Kit includes latch, spacer,
latch release and mounting hardware (use with
60SR3BO5 Relay Socket).
60SR3BO5 Square Base Relay Socket
DA 10 10 A3 01
VOLTAGE &
FREQUENCY
Sym. Description
120 VAC, 50/60 Hz or 120 VDC
A3
240 VAC, 50/60 Hz or 240 VDC
B3
24 VAC, 50/60 Hz or 24 VDC
Z3
1.950
(49.53)
DZ100-51
DZ100-54
(Blank)
DZ100-52
DZ100-56
FEATURES
Sym.
Description
Standard, OFF Time First, DPDT Relay Output
ON Time First
01
One Cycle Only (OFF Time First)
03
(Requires factory components)
DANAHER INDUSTRIAL CONTROLS
5.37
Loading...