Eagle Signal A103 Catalog Page

EAGLE SIGNAL brand

Electronic Timers

E L

The A103 Elapsed Time Indicators provide a range of capabilities

unequaled in products of similar size and cost. A single model can be

programmed to display in seconds, minutes, hours, or hours: minutes:

seconds. The A103 series also includes matching indicators for count

totalization and rate metering, as well as models with a preset output for

control by count or time. All are in a uniform 36 x 72 millimeters bezel

size package, enhancing your control panel with a family of devices that

look and program alike.

A supertwist LCD display with thick 12mm (.47") high digits allows for

easy viewing at a glance and feature display-backlight capability by

simply connecting an external 12VDC supply. Powered by an internal 3 volt battery, the A103's unique design has two

battery slots; this allows battery changeover without loss of memory. Timing start/stop can be initiated by solid-state signals or mechanical

switches.

■ Matching totalizing and preset counters, preset timers, tachometer/

rate indicators are available – look great together on a panel

■ High visibility 7-digit LCD display with backlighting capability standard

■ Long life 3 Volt lithium battery eliminates the need for external power

■ Accepts input signals from a variety of sources: Dry Contact, PNP or

NPN Sensors

■ Single multirange model covers popular time resolutions

■ Resettable remotely or from the front panel

■ Programmable security of front panel reset button

■ Option modules provide additional functionality and added conve-

nience – fast, easy installation

■ NEMA 4X/IP65 rated front panel for use in washdown environments

The A103 timers are further enhanced by a series of quick-attach option modules. These can provide a power supply for sensors and display backlighting, and accept high or low voltage AC or DC input signals.

SPECIFICATIONS

Start/Stop Input: NPN, Contact Closure; Accumulates time when connected

to common; Low State: < 1.0 VDC, High State: > 2.0 VDC (28VDC max)

Security Input: Allows access to panel reset and programming features Remote Reset Input: NPN or Contact Closure to common; level sensitive Power Source: Single or dual 3V Lithium battery; typical 5 years life w/single

battery, 10 years w/dual batteries

Ranges & Resolution: Seconds, minutes to 1/10, hours to 1/10,

hours: minutes: seconds

Display: 12mm high, Supertwist LCD; 7 digits; "Low Bat" indicator Backlighting: Green Illumination over whole viewable area. Requires 10 to

28 VDC power source

Dimensions & Mounting: See dimensions figure. Panel Mount with

supplied mounting bracket and gasket

Connections: Screw terminals Weight: Approximately 64 grams (2.25 ounces)

A103 Timers

Cost effective, compact elapsed time indicator… large display with backlighting

All in the family - Other matching A103 series products in this catalog:

A103 Totalizing Counters: Page 1.02 A103 Preset Counters: Page 2.07 A103 Tachometers/Rate Indicators: Page 4.04 - 4.06 A103 Preset Timers: Page 5.05

OPTION MODULE SPECIFICATIONS

Option modules accessories provide a convenient integrated solution to applications that require AC or high voltage DC signals, and/or a voltage source for use with the A103's display backlight feature or external. Specifications for each option module feature follow, while specific combinations of features are listed in the "Models" table, below.

High Voltage Input: Allows A103 to accept 100 to 260 Volt AC/DC as timing input Low Voltage Input: Allows A103 to accept 5 to 30 VAC or VDC as timing input AC Power Supply: Provides 10 - 20 VDC @ 50 mA for display backlighting

and/or sensor. Requires connection to 115 or 230 VAC, 50/60 Hz

Model No. Description A103-006 A103 Elapsed Time Indicator

The following option modules attach

to the rear of A103 timers:

Model No. AC Power Low Voltage High Voltage

A103-A12 X A103-A17 X A103-A19 X X A103-A10 X A103-A14 X X

Replacement Battery: 605472-0001 Panel Hole Punch: A103-A40

Dimensions:

36m (1.42")

33m (1.30")

A103 Rear View

Supply Input Input

m (2.83")

72m

m (2.66")

68m

4 3

2 1

5 6

7 8

Option Module Rear View

Depth Behind Panel

Without Adaptor Module: 39mm (1.54") With Adaptor Module: 89mm (3.50")

Panel Cutout: 33mm x 68mm(1.30" x 2.66")

5.44

DANAHER INDUSTRIAL CONTROLS