Eagle Signal 191 Catalog Page
EAGLE SIGNAL brand
Electric Timers
MODEL 191
PUSHBUTTON RESET TIMER
6
E
L
T
E
I
C
M
T
E
R
R
I
S
C
191 04 A6 01
TIME RANGE
For Complete Information,
Request Bulletin No. 176
VOLTAGE &
FREQUENCY
FEATURES
Model 191 / AB4 MANUFLEX
®
Just set the dial and
push the button to
initiate an accurate
time delay or interval
cycle
The Model 191 is a push-button start, motor driven timer with cycle
progress pointer, double make-double break snap action switch and
is used to energize a load for a preset time period. The pushbutton is located in the center of the time set pointer knob on the
panel mounted dial. When depressed momentarily, a mechanical
latch and switch is engaged, starting the motor and timing period.
After completion of timing, switch 3 and 4 open, 1 and 2 close,
motor stops, and timer resets to setpoint. Timer is now ready for
another timing operation.
The standard timer has cycle progress and a 3 5/8 inch square
bezel with window. The "01" feature does not include cycle
progress indicator or bezel and window assembly.
AB4 MANUFLEX
HAND SET
AB4 3 A6 04
TIME RANGE
For Complete Information,
Request Bulletin No. 174
®
Very easy to use... to
start a cycle just turn
the pointer knob to
the desired time
The MANUFLEX® AB series timer is a manually set, synchronous
motor driven timer, adjustable to a selected time range by a large,
easy to read set pointer. To operate, turn the set pointer to the
required time interval. A load circuit is closed when the pointer is
turned from zero. The timer motor drives the pointer back to zero,
FEATURES
VOLTAGE &
FREQUENCY
at which point the load circuit opens. Timer is used where a device
is to be turned on, runs a selected time and stops at the end of the
time interval.
The AB has a hold position, enabling the load circuit to remain off or
remain on without starting the timing motor.
6.14 DANAHER INDUSTRIAL CONTROLS
Loading...