Specification Sheet
Short Form Specifications
Stencil shelves are paired with opposing design top and bottom. Footprint is 18˝ width x 36˝ length, with EAGLEbrite® zinc plating. Divider wires to provide 2˝ inside dimension and 4˝ up and down support. Adjustable in 1˝ increments. Each shelving tier to hold up to 15 stencils. May be used with any other wire shelving product on the same centers.
two tiers of stencil shelves— shown in mobile unit configuration
A stencil shelf consists of one top and one bottom partitioned shelf.
Item No.:
Project No.:
S.I.S. No.:
Stencil Shelves
MODELS:
ST1836Z-13
Design and Construction Features
•One #ST1836Z-13 includes one bottom and one top shelf. One #ST1836Z-13 is required for each tier.
•Each unit has (15) 2˝ (51mm) partitions.
•The stencil shelf may be used with any combination of posts* and casters** that best meets your requirements.
•A stationary unit can be made conductive with the use of optional aluminum split sleeves.
•A mobile unit may be made conductive with the use of optional aluminum split sleeves and optional anti-static drag chain.
•Zinc finish.
*See catalog sheet #EG01.00 for posts available.
**See catalog sheet #EG01.05 for casters available.
Options / Accessories
Aluminum split sleeves
Anti-static drag chain
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA Phone: 302-653-3000 • Fax: 302-653-2065 www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB® Division. |
|
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com |
EG07.08 Rev. 12/08 |
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
<![endif]>Shelves Stencil 08.EG07 .No Sheet Specification Catalog
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
<![endif]>Catalog Specification Sheet No. EG07.08
<![if ! IE]><![endif]>Stencil Shelves
Stencil Shelves
TOP VIEW
Item No.:
Project No.:
S.I.S. No.:
FRONT VIEW |
SIDE VIEW |
(note: only bottom shelf shown)
|
width |
length |
weight |
|
|||
model # |
in. |
mm |
in. |
mm |
lbs. |
kg |
capacity |
|
|
|
|
|
|
|
|
ST1836Z-13* |
18˝ |
457 |
36˝ |
914 |
48 |
21.8 |
holds (15) stencils |
* Note: #ST1836Z-13 includes two shelves—one for top and one for bottom.
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA Phone: 302-653-3000 • Fax: 302-653-2065 www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
Printed in U.S.A. ©2008 by Eagle Group
Rev. 12/08
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.