Eagle Group OUR-PZA-12A General Manual
Specification Sheet
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Short Form Specifications
Eagle Panco®Pizza Pan Rack, model OUR-PZA-12A.
All-welded aluminum construction with 1˝ square tubular
frame and supports. Crossbracing runs side-to-side on top
and bottom. Aluminum angle tray slides with raised beads to
minimize friction. 2˝ adjustable slide spacing accommodates
13 pans. Furnished with 5˝-diameter casters. Shipped
knocked down.
Eagle Panco
®
Pizza Pan Rack, model OUR-PZ-12A. All-welded
aluminum construction with 1˝ square tubular frame and
supports. Crossbracing runs side-to-side and front-to-back on
top and bottom. Aluminum tray slides with raised beads to
minimize friction, riveted to frame. 2˝ slide spacing
accommodates 12 pans—flat, rimmed, tapered or nesting
type—up to 13⁄4˝ deep. Furnished with 5˝-diameter casters.
Shipped assembled.
#OUR-PZA-12A
k
adjustab
le pizza pan r
ac
#OUR-PZ-12A
elded pizza pan r
all-w
ac
k
Panco®Pizza Pan Racks
MODELS:
OUR-PZA-12A
OUR-PZ-12A
Features on #OUR-PZA-12A Rack
• Heavy duty all-aluminum welded frame construction.
• Frame and supports: 1˝ (25mm) square aluminum tubing.
Crossbracing runs side-to-side on top and bottom.
• Tray slides: aluminum angle bearing surface with raised
beads to minimize friction. Slides are welded to frame.
• Features adjustable pan openings for 10˝ to 16˝
(254 to 406mm) pans. Knock-down construction.
• Casters: 5˝ (127mm)-diameter non-marking swivel stem
casters with polymer tread.
Features on #OUR-PZ-12A Rack
• Heavy duty all-aluminum welded frame construction.
• Frame and supports: 1˝ (25mm) square aluminum tubing.
Crossbracing runs side-to-side and front-to-back on top
and bottom.
• Tray slides: aluminum angle bearing surface with raised
beads to minimize friction. Slides are riveted to frame.
• All-welded rack holds flat, rimmed, tapered, and nesting
pans up to 13⁄4˝ (44mm) deep and feature a solid
aluminum top.
• Casters: 5˝ (127mm)-diameter non-marking swivel stem
plated casters with polymer tread.
EG60.18A
Panco
®
Pizza Pan Racks
Options / Accessories
Casters with locking brakes
Rotary bumpers
Vertical corner bumpers
Pan stop
Perimeter bumper
EAGLE GROUP
Certifications / Approvals
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodser
vice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com
Spec sheets available for viewing, printing or downloading from our online literature librar
Eagle Foodser
vice Equipment, Eagle MHC, SpecFAB
®
, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
y at
EG60.18A Rev. 08/08
.eaglegrp.com
www
EG60.18A
Panco®Pizza Pan Racks
#OUR-PZA-12A—Adjustable
Catalog Specification Sheet No.
Pizza Pan Racks
®
model # in. mm in. mm in. mm in. mm capacity lbs. kg
OUR-PZA-12A adj. 133⁄8˝ 340 343⁄4˝ 883 2˝ 51 13 26 11.8
Item No.:
Project No.:
S.I.S. No.:
FRONT VIEW SIDE VIEW
overall dimensions sliding
width depth height space pan weight
Panco
#OUR-PZ-12A—All-welded
FRONT VIEW SIDE VIEW
overall dimensions sliding
width depth height space pan weight
model # in. mm in. mm in. mm in. mm capacity lbs. kg
OUR-PZ-12A 22˝ 559 20˝ 508 333⁄4˝ 857 2˝ 51 12 36 16.3
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
.eaglegrp.com
www
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature librar
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order
y at
©2008 by Eagle Group
.eaglegrp.com
www
Printed in U.S.A.
Rev. 08/08
.
Loading...