Eagle Group HSA-10-F-LRS General Manual

Item No.:

Project No.:

S.I.S. No.:

Specification Sheet

Short Form Specifications

Eagle Hand Sinks with Side Splashes, model ____________.

Constructed of all-welded type 304 stainless steel, with deepdrawn positive drain sink bowl, inverted “V” edge to prevent spillage, drain, splash-mounted faucet, and factory-installed side splash on both sides. Offered are the following hand sinks:

•Model #HSA-10-F-LRS.

•Model #HSAN-10-F-LRS. 12˝ side-to-side.

•Model #HSA-10-FDPE-LRS. Includes paper towel dispenser, soap dispenser, and electronic-eye faucet.

•Model #HSA-10-FTWS-LRS. Includes tubular wall support.

HSA-10-F-LRS

HSAN-10-F-LRS

HSA-10-FTWS-LRS

HSA-10-FDPE-LRS

Hand Sinks with Side Splashes

MODELS:

HSA-10-F-LRS

HSAN-10-F-LRS

HSA-10-FTWS-LRS

HSA-10-FDPE-LRS

Hand Sinks

•Heavy gauge type 304 stainless steel all-welded construction.

•Inverted “V” edge rim retards spillage.

•Unique deep-drawn positive-drain bowl assures complete drainage to meet the most stringent health code requirements.

•Water inlet: 1⁄2˝ (13mm) NPT.

•Drain outlet: 11⁄2˝ (38mm) NPS.

Side Splashes

•Side splashes are factory-installed on both sides of sink.

•16 gauge type 304 stainless steel.

•Tapered and rounded for safety.

		bowl size		overall size
		width x length x depth		width x length x height			weight
model #	includes	in.	mm	in.		mm	lbs.	kg
HSA-10-F-LRS	faucet, basket drain	93⁄4˝ x 131⁄2˝ x 63⁄4˝	248 x 343 x 173	143⁄4˝ x 187⁄8˝ x 123⁄4˝		376 x 480 x 324	14	6.4
	and side splashes
HSAN-10-F-LRS	12˝ side-to-side, faucet,	131⁄2˝ x 93⁄4˝ x 63⁄4˝	343 x 248 x 173	18˝ x 12˝ x 141⁄4˝		457 x 305 x 362	13	5.9
	basket drain, side splashes
HSA-10-FTWS-LRS	faucet, p-trap, tubular wall	93⁄4˝ x 131⁄2˝ x 63⁄4˝	248 x 343 x 173	143⁄4˝ x 187⁄8˝ x 123⁄4˝		376 x 480 x 324	21	9.5
	brackets, basket drain,
	side splashes
HSA-10-FDPE-LRS	battery-powered electric-eye
	faucet, towel/soap dispenser,	93⁄4˝ x 131⁄2˝ x 63⁄4˝	248 x 343 x 173	143⁄4˝ x 191⁄4˝ x 281⁄4˝		376 x 489 x 718	31	14.1
	basket drain, side splashes
EAGLE GROUP
			Certifications / Approvals
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com
Foodservice Division: Phone [phone]
MHC/Retail Display Divisions: Phone [phone]
For custom configuration or fabrication needs, contact our SpecFAB® Division.
Phone: [phone] • Fax: [phone] • e-mail: [e-mail]						EG20.56	Rev. 11/09

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

<![if ! IE]>

<![endif]>Splashes Side with Sinks Hand 56.EG20 .No Sheet Specification Catalog

Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2009 by the Eagle Group