Eagle Group DVS-48 General Manual

Item No.:

Project No.:

S.I.S. No.:

Specification Sheet

Short Form Specifications

Eagle SPEC AIR® Condensate Vents, model ______________.

Heavy gauge type 304 stainless steel. Continuously welded liquid tight. Mounts to dishwasher end vents. Furnished with stainless steel ceiling plate. Specify make and model of dishwasher.

Eagle SPEC AIR® Dishwasher Condensate Hood, model

_____________. Heavy gauge type 304 stainles s steel. Continuously welded liquid tight. Furnished with full perimeter gutter, drain tube, exhaust collar, and front and rear hangar brackets.

condensate vents

condensate hood

SPEC AIR® Condensate Vents

and Hoods

MODELS:

HDC3636

HDC3642

HDC3648

HDC4242

HDC4848

DVS-48

DVS-60

DVS-72

All Models:

For use in commercial kitchens, dishrooms, or other non-grease heat or smoke removal applications.

Condensate Vents—DVS Series

•Heavy gauge type 304 stainless steel hood surfaces.

•Seams of vent are continuously liquid-tight.

•Mounts to dishwasher end vents.

Condensate and Type II* Hoods—HDC Series

•Heavy gauge type 304 stainless steel construction.

•Seams of canopy are continuously liquid-tight.

•Full perimeter gutter.

•Drain tube located on the left.

•12˝ x 12˝ (305 x 305mm) exhaust collar.

•Front and rear full length hanging brackets.

•NFPA-96 approval for Type II*.

*For Type II applications, optional baffles are required. To order, add suffix “S” to model number. Example: HDC3636S

	Options / Accessories
	Options available for Type II hoods.
	See catalog sheet EG55.05.
	EAGLE GROUP
		Certifications / Approvals
	100 Industrial Boulevard, Clayton, DE 19938-8903 USA
	Phone: [phone] • Fax: [phone]			NFPA-96
	www.eaglegrp.com
	Foodservice Division: Phone [phone]
	MHC/Retail Display Divisions: Phone [phone]

For custom configuration or fabrication needs, contact our SpecFAB® Division.
Phone: [phone] • Fax: [phone] • e-mail: [e-mail]	EG55.03 Rev. 06/10

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

<![if ! IE]>

<![endif]>Hoods and Vents Condensate ®AIR SPEC 03.EG55 .No Sheet Specification Catalog

Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2010 by the Eagle Group

<![if ! IE]>

<![endif]>SPEC AIR® Condensate Vents and Hoods Catalog Specification Sheet No. EG55.03

Item No.:

Project No.:

S.I.S. No.:

SPEC AIR® Condensate Vents and Hoods

DVS Series Condensate Vents

HDC Series Condensate & Type II Hoods

			outer dimensions *
	width**		length**		height		weight
model #	in.	mm	in.	mm	in.	mm	lbs.	kg
DVS-48	4˝	102	16˝	406	48˝	1219	60	27.2
DVS-60	4˝	102	16˝	406	60˝	1524	75	34.0
DVS-72	4˝	102	16˝	406	72˝	1829	90	40.8

*If you have other size requirements, please call the factory.

**Outer width and length dimensions exclude 2˝ (51mm) flange.

		overall dimensions *
	width		length			weight
model #	in.	mm	in.	mm		lbs.	kg
HDC3636	36˝	914	36˝	914		105	47.6
HDC3642	36˝	914	42˝	1067		115	52.2
HDC3648	36˝	914	48˝	1219		125	56.7
HDC4242	42˝	1067	42˝	1067		135	61.2
HDC4848	48˝	1319	48˝	1219		150	68.0

* If you have other size requirements, please call the factory.

EAGLE GROUP

100 Industrial Boulevard, Clayton, DE 19938-8903 USA Phone: [phone] • Fax: [phone] www.eaglegrp.com

Foodservice Division: Phone [phone]	Printed in U.S.A.
	©2010 by Eagle Group
MHC/Retail Display Divisions: Phone [phone]	Rev. 06/10

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.