Eagle Group DCS2-ICU General Manual

Specification Sheet

Catalog Specification Sheet No.

Item No.:

Project No.:

S.I.S. No.:

Short Form Specifications

Eagle Director's Choice®Ice Cream Unit, model
_________________. Top to be 16/304 stainless steel turned
down on all sides. 11⁄2˝ square type 304 stainless steel
all-welded tubular base. Fully mobile with 5˝ poly tread casters,
two with brake. Quick release spring loaded docking device
keeps adjoining units together. Heavy gauge stainless steel
liner, hinged lift off lid is insulated stainless steel with plastic
coated pulls, 21⁄2˝ insulation on all sides. Operating temperature
to range from -10˚F to 0˚F. Stainless steel lift-off louvered
panels on operator’s side. Standard laminate front panel is

®

holly berry red (Wilsonart

#D307-60). 1⁄4 H.P. compressor,

6.8 amps, 120/60/1 wired to a 6´ cord and plug.

#DCS3-ICU ice cream unit shown with

optional tray slide and end panels

exclusive docking device joins units

together without the use of tools

Options / Accessories

Laminated end panels
Stainless steel end panels
Stainless steel front panel
Stainless steel tray slide*

*

Available in solid ribbed, square tubular or round tubular. For front, rear, or ends.

**

Available in hardwood, stainless steel, poly, or Richlite

***

Specify at time of order.

ork shelf**

W
Specify laminate ___________
Locking lid device
5-year compressor warranty***

®

. For front, rear

, or ends.

Director’s Choice

®

Ice Cream Units

MODELS:

DCS2-ICU
DCS3-ICU

Design and Construction Features

30˝ (762mm)-wide top is constructed of 16 gauge type 304

•
stainless steel.

• Welded 11⁄2˝ (38mm) square tubular type 304 stainless steel
base construction.

• H

inged lift-off lid is insulated stainless steel with plastic

coated pulls.

• Heavy gauge type 304 stainless steel inner liner is one-piece
construction, all-welded, ground and polished.

• Three working heights available:

- 34˝ (864mm) standard working height complies with ADA

guidelines for accessibility standards.

- 30˝ (762mm) for middle schools.

- 28˝ (711mm) low profile for elementary schools and

nursing/healthcare facilities.

1

⁄2˝ (64mm)-thick insulation on all sides, enclosed with

• 2
galvanized steel outer liner.

• Liner features coved corners and copper tubing soldered to
exterior sides and bottom.

• Operating temperature of freezer ranges from -10˚F to 0˚F.

., 6.8A, 120V operation wired to a 6´ (1829mm) cord

• 1⁄4 H.P
and NEMA 5-15P plug.

• Quick-release spring-loaded docking device keeps adjoining
units together without the use of tools.

Fully mobile - standard 5˝ (127mm) casters, two with brake

•
(brake casters on ser

• Standard front holly berry red (Wilsonart
laminate mounted on 18 gauge galvanized subpanel.

All units accommodate optional accessories, including tray

•
slides and work shelves. See Catalog Sheet EG33.07.

ver side).

®

D307-60)

EG33.11

Director’s Choice

®

Ice Cream Units

EAGLE GROUP

Certifications / Approvals

100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com

Foodser

vice Division: Phone [phone]

CUSTOM-BUILT

MHC/Retail Display Divisions: Phone [phone]

For custom configuration or fabrication needs, contact our SpecFAB®Division.

Phone: [phone] • Fax: [phone] • e-mail: [e-mail]

Spec sheets available for viewing, printing or downloading from our online literature librar

Eagle Foodser

vice Equipment, Eagle MHC, SpecFAB

®

, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group

y at

EG33.11 Rev. 08/08

.eaglegrp.com

www

EG33.11

Director’s Choice®Ice Cream Units

Catalog Specification Sheet No.

TOP VIEW

Item No.:

Project No.:

S.I.S. No.:

Ice Cream Units

®

FRONT VIEW (OPERATOR’S SIDE)

Director’s Choice

model # electrical data in. mm lbs. kg lbs. kg capacity

DCS2-ICU 1/4HP
DCS3-ICU 1/4HP, 120V, 6.8A 50˝ 1270 285 129.3 150 68.0 4.2

Optional laminate end panels available. T
Optional stainless steel front panel in lieu of laminate front panel available. To order, add suffix “-S” to model number. Example: DCS2-ICU-S
Optional stainless steel end panels available. To order, add suffix “-SEP” to model number. Example: DCS2-ICU-SEP

EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]

.eaglegrp.com

www
Foodservice Division: Phone [phone]

MHC/Retail Display Divisions: Phone [phone]

Spec sheets available for viewing, printing or downloading from our online literature librar

Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for

typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order

o order

*

SIDE VIEW

clearance at 30˝ (763mm) = 3˝ (76mm)

*

clearance at 28˝ (711mm) = 1˝ (25mm)

(note: model #DCS3-ICU shown)

length weight capacity feet

, 120V, 6.8A 36˝ 914 250 113.4 100 45.4 2.6

, add suffix “

-LEP” to model number

. Example: DCS2-ICU

ice cream

-LEP

cubic

y at

©2008 by Eagle Group

.eaglegrp.com

www

Printed in U.S.A.

Rev. 08/08

.