Eagle Group BD24-18L General Manual

Item No.:

Project No.:

S.I.S. No.:

Specification Sheet

Short Form Specifications

Eagle 1800 Series Blender Module, model ______________. On all models: top, front, and backsplash to be heavy gauge type 304 stainless steel. Liquid waste chute with 11⁄2˝ drain, strainer, faucet and tail piece. Blender recess with 15-amp, 120-volt GFCI receptacle mounted for field wiring with waterproof cover plate. 15⁄8˝ O.D. galvanized tubular legs with adjustable bullet feet. All units with ice bin available with or without sealed-in 7-circuit post-mix cold plate.

Models with sink: 10˝ x 14˝ x 91⁄2˝-deep sink to be heavy gauge type 304 stainless steel, with splash-mount faucet.

Models with ice bin: Ice bin to be heavy gauge type 304 stainless steel and fully insulated, with 11⁄2˝ drain.

Models with ice bin and bottle holders: Ice bin to be heavy gauge type 304 stainless steel and fully insulated. Removable bottle holders on either one side of ice bin or both sides of ice bin.

Models with ice bin and workboard: ice bin to be heavy gauge type 304 stainless steel and fully insulated. 24˝ embossed workboard section.

#BD24-18R blender module

1800 Series Blender Modules

MODELS:

BD24-18L

BM50-18R

BM3-18L-7

BM50R-18L-7

BD24-18R

BM50R-18L

BM3-18R-7

BM50L-18R-7

BM3-18L

BM50L-18R

BM50-18L-7

BM62-18L-7

BM3-18R

BM62-18L

BM50-18R-7

BM62-18R-7

BM50-18L

BM62-18R

Design and Construction Features

•Stainless steel type 304 body.

•12˝ (305mm) wide blender recess—may be located either side. 14˝ (356mm) wide on 50˝ and 62˝ (1270 and 1575mm) models.

•15-amp, 120-volt receptacle mounted for field wiring.

•75 lb. (32 kg) ice capacity.

•Liquid waste chute with 11⁄2˝ (38mm) drain, strainer, faucet, and tail piece.

•High-impact, corrosion-resistant, fully-adjustable bullet feet.

•Fabricated ice bin.

•All units with ice bin available with or without sealed-in 7-circuit post-mix cold plate.

Options / Accessories

Stainless steel leg kits (see below)

			Optional Stainless Steel Leg Kits
		add suffix #	description
		-SL	stainless steel leg assemblies
		-SLF	stainless steel leg assemblies & stainless steel feet
		-SLG	stainless steel leg assemblies & stainless steel gussets
		-SLGF	stainless steel leg assemblies, stainless steel feet & gussets
EAGLE GROUP
				Certifications / Approvals
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com
Foodservice Division: Phone [phone]
MHC/Retail Display Divisions: Phone [phone]
For custom configuration or fabrication needs, contact our SpecFAB® Division.
Phone: [phone] • Fax: [phone] • e-mail: [e-mail]							EG40.05 Rev. 06/10

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

<![if ! IE]>

<![endif]>Modules Blender Series 1800 05.EG40 .No Sheet Specification Catalog

Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2010 by the Eagle Group

<![if ! IE]>

<![endif]>1800 Series Blender Modules Catalog Specification Sheet No. EG40.05

Item No.:

Project No.:

S.I.S. No.:

1800 Series Blender Modules

24˝ (610mm) Models

		width		length		weight
model #		in. mm		in. mm		lbs.	kg
BD24-18L		20˝	495	24˝	610	40	18.1
BD24-18R		20˝	495	24˝	610	40	18.1
								TOP VIEW	FRONT VIEW	SIDE VIEW
									(model #BD24-18L shown)

36˝ (914mm) Models

			width		length		weight
	model #		in. mm		in. mm		lbs.	kg
	BM3-18L		20˝	495	36˝	914	67	30.4
	BM3-18R		20˝	495	36˝	914	67	30.4
	UNITS WITH COLD PLATE
	BM3-18L-7		20˝	495	36˝	914	97	44.0	TOP VIEW	FRONT VIEW	SIDE VIEW
	BM3-18R-7		20˝	495	36˝	914	97	44.0
										(model #BM3-18L shown)

50˝ (1270mm) Models

with ice bin centered between bottle holders

	width		length		weight
model #	in. mm		in.	mm	lbs. kg
BM50-18L	20˝	495	50˝	1270	90	40.8
BM50-18R	20˝	495	50˝	1270	90	40.8

UNITS WITH COLD PLATE

BM50-18L-7		20˝	495	50˝	1270	120	54.4	TOP VIEW	FRONT VIEW	SIDE VIEW
BM50-18R-7		20˝	495	50˝	1270	120	54.4		(model #BM50-18L shown)

50˝ (1270mm) Models

with ice bin centered between bottle holders and blender recess

			width		length		weight
	model #		in. mm		in.	mm	lbs.	kg
	BM50R-18L		20˝	495	50˝	1270	90	40.8
	BM50L-18R		20˝	495	50˝	1270	90	40.8
	UNITS WITH COLD PLATE								TOP VIEW	FRONT VIEW	SIDE VIEW
	BM50R-18L-7		20˝	495	50˝	1270	120	54.4
										(model #BM50R-18L shown)
	BM50L-18R-7		20˝	495	50˝	1270	120	54.4

62˝ (1575mm) Models

	width		length		weight
model #	in. mm		in.	mm	lbs.	kg
BM62-18L	20˝	495	62˝	1575	110	49.9
BM62-18R	20˝	495	62˝	1575	110	49.9

UNITS WITH COLD PLATE

	BM62-18L-7	20˝	495	62˝	1575	140	63.5	TOP VIEW	FRONT VIEW	SIDE VIEW
	BM62-18R-7	20˝	495	62˝	1575	140	63.5
									(model #BM62-18L shown)

EAGLE GROUP

100 Industrial Boulevard, Clayton, DE 19938-8903 USA Phone: [phone] • Fax: [phone] www.eaglegrp.com

Foodservice Division: Phone [phone]	Printed in U.S.A.
	©2010 by Eagle Group
MHC/Retail Display Divisions: Phone [phone]	Rev. 06/10

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.