Eagle Group B12IC-19 General Manual
Specification Sheet
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Short Form Specifications
Eagle Spec-Bar 2000®Ice Chest, model ________________.
Heavy gauge type 304 stainless steel body, legs, leg channels
1
and crossbracing. Ice chest to be 10
⁄2˝-deep standard, with
foamed-in-place insulation, non-metallic breaker strip to
7
prevent heat transfer, and stainless steel sliding cover.
⁄8˝ x 27⁄8˝
rectangular slots in top of backsplash for tubing. Stainless
steel adjustable bullet feet.
19˝ wide (483mm) ice chest
Options / Accessories
Two-circuit post-mix cold plate
Eight-circuit post-mix cold plate
19˝ (483mm)-wide extra depth
Speed rail
Bottle rack
Spec-Bar 2000®Ice Chests
MODELS:
B12IC-19
B18IC-19
B24IC-19
B30IC-19
B36IC-19
B42IC-19
B48IC-19
Design and Construction Features
• Body, legs and crossbracing constructed of type 304
stainless steel for strength and corrosion resistance.
• Interior ice bin is 10
1
⁄2˝ (368mm)-deep in extra deep models.
and 14
• Ice bin insulated with foamed-in-place insulation for
maximum efficiency.
• Non-metallic breaker strip prevents heat transfer to ice bin.
• All models include two-piece type 304 stainless steel sliding
cover, removable for cleaning ease.
• Standard model drains are a 1
cold plate model drains have1⁄2˝ (13mm) NPT.
• Two-circuit post-mix cold plates and eight-circuit post-mix
cold plates available for all models (except where noted in
charts on back page).
• Post-mix cold plate connection is
steel tubing with swaged end.
• Tubing access hole dimensions are
and capacity per hole is 12 lines of1⁄4˝ I.D. x3⁄8˝ O.D.
(6 x 10mm) nylon braided tubing.
5
• Legs are 1
⁄8˝ (41mm)-diameter type 304 stainless steel with
stainless steel bullet feet.
• Optional deeper ice bin available on 19˝ (483mm)
wide models.
B12IC-24
B18IC-24
B24IC-24
B30IC-24
B36IC-24
B42IC-24
B48IC-24
1
⁄2˝ (267mm)-deep in standard models
1
⁄2˝ (38mm) tailpiece, post-mix
1
⁄4˝ (6mm) O.D. stainless
7
⁄8˝ x 27⁄8˝ (22 x 73mm)
EG40.17
Spec-Bar 2000
®
Ice Chests
EAGLE GROUP
Certifications / Approvals
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com
EG40.17 Rev. 09/08
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
EG40.17
Spec-Bar 2000®Ice Chests
Item No.:
Project No.:
S.I.S. No.:
Catalog Specification Sheet No.
Ice Chests
®
Spec-Bar 2000
TOP VIEW
FRONT VIEW
19˝ wide (483mm)
SIDE VIEW FRONT VIEW SIDE VIEW
24˝ wide (610mm)
TOP VIEW
width length weight
model # in. mm in. mm lbs. kg
B12IC-19* 19˝ 483 12˝ 305 34 15.2
B18IC-19* 19˝ 483 18˝ 457 50 22.8
B24IC-19 19˝ 483 24˝ 610 67 30.4
B30IC-19 19˝ 483 30˝ 762 84 38.0
B36IC-19 19˝ 483 36˝ 914 101 45.6
B42IC-19 19˝ 483 42˝ 1067 117 53.2
B48IC-19 19˝ 483 48˝ 1219 134 30.7
* There are no optional post-mix cold plates available for these models.
model # in. mm in. mm lbs. kg
B12IC-24* 24˝ 610 12˝ 305 43 19.3
B18IC-24** 24˝ 610 18˝ 457 64 28.9
B24IC-24 24˝ 610 24˝ 610 85 38.5
B30IC-24 24˝ 610 30˝ 762 406 48.2
B36IC-24 24˝ 610 36˝ 914 427 57.8
B42IC-24 24˝ 610 42˝ 1067 149 67.4
B48IC-24 24˝ 610 48˝ 1219 170 77.7
* There are no optional post-mix cold plates available for this model.
** For B18IC-24, only an optional 2-circuit post-mix cold plate is available.
width length weight
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
©2008 by Eagle Group
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Printed in U.S.A.
Rev. 09/08
Loading...