Eagle Group 501572 General Manual

Item No.:

Project No.:

S.I.S. No.:

Specification Sheet

Tier Drawers and Drawer Assemblies for Stainless Steel and Hardwood Tables

MODELS:
			501572			502972			608118
			502943			606826			NTD3
			502946			608115			NTD3L
			502947			608116			TD3
			502971			608117			TD3L

	Regular Tier Drawers
	• Heavy gauge type 430 stainless steel cabinet with three roller-track drawers.
	• Available with nylon feet or legs.
#TD3	• Includes guides, zinc-plated full-extension slides, and stainless steel drawer.
	• Hemmed safety pull handle on each drawer.
	• All shipping weights are approximate.

removable NSF drawer slide

#NTD3L

Options / Accessories

		width x length x height		weight
model #	description	in.	mm	lbs.	kg
TD3	3 drawers, with nylon feet	221⁄2˝ x 24˝ x 22˝	572 x 610 x 559	75	34.0
TD3L	3 drawers, with legs	221⁄2˝ x 24˝ x 341⁄2˝	572 x 610 x 876	78	35.4

NSF-Approved Tier Drawers

•Utilizes totally removable drawer slides certified by the National Sanitation Foundation.

•Otherwise, design and features are the same as tier drawers listed above.

•Hemmed safety pull handle on each drawer.

•Optional pan replacement available: Model #608120.

		width x length x height		weight
model #	description	in.	mm	lbs.	kg
NTD3	3 drawers, with nylon feet	221⁄2˝ x 24˝ x 22˝	572 x 610 x 559	75	34.0
NTD3L	3 drawers, with legs	221⁄2˝ x 24˝ x 341⁄2˝	572 x 610 x 876	78	35.4

Drawer lock (suffix “-L”)

Pan replacement for NSF-Approved Tier Drawers

Pan replacement for drawer assemblies

EAGLE GROUP	Certifications / Approvals
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com
Foodservice Division: Phone [phone]	(only where noted)
MHC/Retail Display Divisions: Phone [phone]
For custom configuration or fabrication needs, contact our SpecFAB® Division.
Phone: [phone] • Fax: [phone] • e-mail: [e-mail]		EG10.13B Rev. 05/10

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

<![if ! IE]>

<![endif]>Tables Hardwood and Steel Stainless for Assemblies Drawer and Drawers Tier 13B.EG10 .No Sheet Specification Catalog

Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2010 by the Eagle Group

<![if ! IE]>

<![endif]>Tier Drawers and Drawer Assemblies for Stainless Steel and Hardwood Tables Catalog Specification Sheet No. EG10.13B

Item No.:

Project No.:

S.I.S. No.:

Tier Drawers and Drawer Assemblies

Drawer Capacity Per Table

Drawers can be centered, left or right.

table length		15˝ x 20˝ (381 x 508mm)	20˝ x 20˝ (508 x 508mm) *
in.	mm	drawer capacity per table	drawer capacity per table
24˝	610	0	0
30˝	762	1 centered	0
36˝	914	1 centered	1 centered
48˝	1219	1 centered; or 1 left & 1 right	1 centered
60˝	1524	1 centered; or 1 left & 1 right	1 centered; or 1 left & 1 right
72˝	1829	3 (1 centered, 1 left, 1 right)	1 centered; or 1 left & 1 right
84˝	2134	4	1 centered; or 1 left & 1 right
96˝	2438	4 (2 left, 2 right)	2 (1 left, 1 right)
108˝	2743	4 (2 left, 2 right)	4 (2 left, 2 right)
120˝	3048	4 (2 left, 2 right)	4 (2 left, 2 right)
132˝	3353	6 (3 left, 3 right)	4 (2 left, 2 right)
144˝	3658	6 (3 left, 3 right)	4 (2 left, 2 right)

* Holes are predrilled for 20˝ x 20˝ drawers only.

enclosed drawer assembly

SPEC-MASTER® heavy duty drawer assembly

		drawer assembly with
	removable NSF
		NSF-approved slides
	drawer slide

Enclosed Drawer Assemblies

•Removable drawer pan.

•Type 430 stainless steel assemblies.

•Hemmed safety pull handle on each drawer.

	width x length x height		weight
model #	in.	mm	lbs. kg
502943 *	20˝ x 15˝ x 5˝ 508 x 381 x 127		35	15.9
501572	20˝ x 20˝ x 5˝ 508 x 508 x 127		35	15.9

Optional Pan

Replacement

model #

608115

608118 **

*Tables must be field drilled for mounting.

**#608118 does NOT fit drawer assembly #501572 with optional lock (#501572-L). Drawer assembly #501572-L accepts only pan replacement #608119.

Enclosed SPEC-MASTER®

Heavy Duty Drawer Assemblies

•Removable drawer pan.

•Type 304 stainless steel assemblies.

•Insulated front.

•Self-closing drawer slides that fully extend from housing.

•These drawer assemblies are stackable.

					Optional Pan
	width x length x height		weight		Replacement
model #	in.	mm	lbs. kg		model #
502972 *	20˝ x 15˝ x 5˝ 508 x 381 x 127		40	18.1	608117
502971	20˝ x 20˝ x 5˝ 508 x 508 x 127		40	18.1	606826

* Tables must be field drilled for mounting.

Drawer Assemblies with NSF-Approved Slides

•Removable drawer slides, making it easy to clean for complete sanitation.

•Type 430 stainless steel.

•Requires no tool.

•All-stainless steel housing and frame.

•Drawer consists of full-length front pull flange and removable drawer pan with large radius corners.

•Hemmed safety pull handle on each drawer.

					Optional Pan
	width x length x height		weight		Replacement
model #	in.	mm	lbs. kg		model #
502947 *	20˝ x 15˝ x 5˝ 508 x 381 x 127		35	15.9	608115
502946	20˝ x 20˝ x 5˝ 508 x 508 x 127		35	15.9	608116 **

* Tables must be field drilled for mounting.

** #608116 does NOT fit drawer assembly #502946 with optional lock (#502946-L). Drawer assembly #502946-L accepts only pan replacement #608119.

EAGLE GROUP

100 Industrial Boulevard, Clayton, DE 19938-8903 USA Phone: [phone] • Fax: [phone] www.eaglegrp.com

Foodservice Division: Phone [phone]	Printed in U.S.A.
	©2010 by Eagle Group
MHC/Retail Display Divisions: Phone [phone]	Rev. 05/10

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.