Eagle Group 4337 General Manual
Specification Sheet
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Short Form Specifications
Eagle LIFETIME Series Universal Roll-In Rack, model
____________. Constructed of heavy duty 6063-T5 aluminum
alloy. Fully welded frame. 1˝ square tubular crossbracing. Base
consists of 1
caster plates welded inside. 3
uprights. Heavy duty 5˝ x 13⁄8˝ non-marking swivel casters.
Options / Accessories
Corner bumpers
Caster locks
Solid base*
Perimeter bumpers*
Pan stop*
Vertical bumpers
* Factory-installation required.
1
⁄2˝ x 11⁄2˝ square aluminum tubing with pretapped
LIFETIME Series
universal roll-in rack
1
⁄4˝ wide angle slides welded to
LIFETIME Series
Universal Roll-In Racks
MODELS:
4337
4338
Design and Construction Features
• LIFETIME GUARANTEE against:
- rust and corrosion
- material defects and workmanship
• Built especially for roll-in freezers, proofers,
and refrigerators.
• All heavy duty type 6063-T5 alloy aluminum
welded construction.
• Unit base consists of 11⁄4˝ x 11⁄2˝ (32 x 38mm) square
aluminum tubing with pretapped caster plates
welded inside.
• Fully-welded frame features 1
heavy-duty “D”-shaped tube construction.
• Crossbracing consists of 1˝ (25mm) square tubing.
• Heavy duty 5˝ x 1
plate casters.
1
⁄4˝ (83mm)-wide aluminum angle slides are welded
• 3
to uprights.
• These racks accommodate a variety of sheet pan sizes.
• Three welds per angle connection.
3
⁄8˝ (127 x 35mm) non-marking swivel
1
⁄2˝ x 13⁄4˝ (38 x 45mm)
EG60.33
LIFETIME Series Universal Roll-In Racks
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
Certifications / Approvals
EG60.33 Rev. 12/08
EG60.33
LIFETIME Series Universal Roll-In Racks
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
TOP VIEW
FRONT VIEW
SIDE VIEW
LIFETIME Series Universal Roll-In Racks
overall dimensions sliding pan/tray capacity
width depth height weight space 12˝ x 20˝ 18˝ x 26˝ 13˝ x 18˝ 14˝ x 18˝
model # in. mm in. mm in. mm lbs. kg in. mm pan pan pan tray
4337 21
4338 21
1
⁄2˝ 546 26˝ 660 64˝ 1626 68 30.8 5˝ 127 10 11 22 22
1
⁄2˝ 546 26˝ 660 64˝ 1626 81 36.7 3˝ 76 17 18 36 36
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
©2008 by Eagle Group
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Printed in U.S.A.
Rev. 12/08
Loading...