Eagle Group 414-16-4 General Manual

Specification Sheet

Catalog Specification Sheet No.

Item No.:

Project No.:

S.I.S. No.:

Short Form Specifications

Eagle Four-Compartment Sink, model____________, with
2˝-wide “Euro-Style” edging on front and sides. Sink bowls are
heavy gauge type 304 stainless steel, with 13
deep drawn, seamless and have all corners coved. Top—
including backsplash, and drainboards (when required)—is
heavy gauge type 430 stainless steel. Drainboards shall be “V”
creased for positive drainage. 9
upturn and tile edge. Legs to be 15⁄8˝ O.D. galvanized tubing
with front-to-back crossbracing, and 1˝ high impact plastic
adjustable bullet feet.

four-compartment sink

with double drainboards

1

⁄2˝ high backsplash with 1˝

1

⁄2˝ water level,

FEATURING

NEW

2˝-WIDE

EURO-STYLE

EDGING

414 Series Coved Corner
Four-Compartment Sinks

MODELS:

414-16-4
414-16-4-18
414-16-4-18L
414-16-4-18R
414-16-4-24
414-16-4-24L
414-16-4-24R

Materials

• Sink bowls: Heavy gauge type 304 stainless steel.

• Top: Drainboards, backsplash and euro-style edging are
heavy gauge type 430 stainless steel.

• Legs: 15⁄8˝ (41mm)-diameter heavy-gauge galvanized tubing
with plated 12-gauge gussets and high-impact corrosion
resistant fully adjustable bullet feet - crossbracing is
1˝ (25mm)-diameter heavy-gauge galvanized tubing.

Design and Construction Features

• All bowls have deep-drawn one-piece seamless
construction, using state-of-the-art hydraulic presses.

• Sink bowls have generous radius with minimum dimension
of 3˝ (76mm) and are rectangular for maximum capacity.

• New 20˝ x 16˝ (508 x 406mm) bowl design, with enhanced
polishing techniques.

1

⁄2˝ (343mm) water level is standard.

• 13

• Swirl-away drainage.

• Leg gusset assemblies welded adjacent to sink bowl for
maximum weight support and stability.

1

⁄2˝ (241mm) standard backsplash includes 1˝ (25mm)

• 9
upturn and tile edge for easy installation and feathering to
wall/splash surface.

• “V” creased drainboards for positive drainage.

414-18-4
414-18-4-18
414-18-4-18L
414-18-4-18R
414-18-4-24
414-18-4-24L
414-18-4-24R

414-24-4
414-24-4-18
414-24-4-18L
414-24-4-18R
414-24-4-24
414-24-4-24L
414-24-4-24R

EG20.26

414 Series Coved Corner Four-Compartment Sinks

Options / Accessories

Stainless steel legs
Stainless steel bullet feet
Lever drains
Twist handle drains
Twist drain brackets

EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com

Foodservice Division: Phone [phone]
MHC/Retail Display Divisions: Phone [phone]

For custom configuration or fabrication needs, contact our SpecFAB®Division.

Phone: [phone] • Fax: [phone] • e-mail: [e-mail]

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2009 by the Eagle Group

Faucets
Sink covers
Waste outlets
Sink kits
Overflow hole

Mechanical:

• Water supply is

• Faucet holes are 11⁄8˝ (29mm) punched on 8˝ (203mm)
centers

; two sets of faucet holes are punched.

• Basket-type waste drain included fits sink bowls’

1

⁄2˝ (89mm) opening and features 11⁄2˝ (38mm) outlet.

3

Certifications / Approvals

1

⁄2˝ (13mm) IPS for hot and cold lines.

EG20.26 Rev. 06/09

Item No.:

Project No.:

EG20.26

S.I.S. No.:

414 Series Coved Corner Four-Compartment Sinks

Overall widths

mitered corner of
euro-style edging

Catalog Specification Sheet No.

(overhead view)

euro-style edging

(side view)

bowl size Dimension A

in. mm

20˝ x 16˝ 508 x 406 271⁄2˝ 699
24˝ x 18˝ 610 x 457 313⁄4˝ 807
24˝ x 24˝ 610 x 610 313⁄4˝ 807

Drain location for rough-in

bowl size Dimension B

in. mm

20˝ x 16˝ 508 x 406 14˝ 357
24˝ x 18˝ 610 x 457 16˝ 406
24˝ x 24˝ 610 x 610 16˝ 406

in. mm

in. mm

BOWL DIMENSIONS DRAINBOARD

width length length width length weight

model # in. mm in. mm quantity in. mm in. mm in. mm lbs. kg

414-16-4 20˝ 508 16˝ 406 0-27
414-16-4-18R or L 20˝ 508 16˝ 406 1 18˝ 457 27
414-16-4-18 20˝ 508 16˝ 406 2 18˝ 457 27
414-16-4-24R or L 20˝ 508 16˝ 406 1 24˝ 610 27
414-16-4-24 20˝ 508 16˝ 406 2 24˝ 610 271⁄2˝ 699 1193⁄4˝ 3042 175 79.5

414-18-4 24˝ 610 18˝ 457 0-31
414-18-4-18R or L 24˝ 610 18˝ 457 1 18˝ 457 31
414-18-4-18 24˝ 610 18˝ 457 2 18˝ 457 31
414-18-4-24R or L 24˝ 610 18˝ 457 1 24˝ 610 31

414 Series Coved Corner Four-Compartment Sinks

414-18-4-24 24˝ 610 18˝ 457 2 24˝ 610 313⁄4˝ 807 128˝ 3251 185 83.9
414-24-4 24˝ 610 24˝ 610 0-31

414-24-4-18R or L 24˝ 610 24˝ 610 1 18˝ 457 31
414-24-4-18 24˝ 610 24˝ 610 2 18˝ 457 31
414-24-4-24R or L 24˝ 610 24˝ 610 1 24˝ 610 31
414-24-4-24 24˝ 610 24˝ 610 2 24˝ 610 31

EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com

Foodservice Division: Phone [phone]
MHC/Retail Display Divisions: Phone [phone]

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for

typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.

OVERALL DIMENSIONS

1

⁄2˝ 699 761⁄2˝ 1943 125 56.7

1

⁄2˝ 699 921⁄8˝ 2340 144 65.3

1

⁄2˝ 699 1073⁄4˝ 2737 163 73.9

1

⁄2˝ 699 981⁄8˝ 2492 150 68.0

3

⁄4˝ 807 851⁄2˝ 2172 135 61.2

3

⁄4˝ 807 1003⁄4˝ 2559 154 69.9

3

⁄4˝ 807 116˝ 2946 173 78.5

3

⁄4˝ 807 1063⁄4˝ 2711 160 72.6

3

⁄4˝ 807 1091⁄2˝ 2783 153 55.6

3

⁄4˝ 807 1243⁄4˝ 3169 172 78.0

3

⁄4˝ 807 140˝ 3556 191 86.6

3

⁄4˝ 807 1303⁄4˝ 3321 178 80.7

3

⁄4˝ 807 152˝ 3861 203 92.1

Printed in U.S.A.

©2009 by Eagle Group

Rev. 06/09