Eagle Group 414-16-1 General Manual

Specification Sheet

Short Form Specifications

Eagle One-Compartment Sink, model____________, with 2˝-wide “Euro-Style” edging on front and sides. Sink bowl is heavy gauge type 304 stainless steel, with 131⁄2˝ water level, deep drawn, seamless and have all corners coved. Top— including backsplash, and drainboards (when required)—is heavy gauge type 430 stainless steel. Drainboards shall be “V” creased for positive drainage. 91⁄2˝ high backsplash with 1˝ upturn and tile edge. Legs to be 15⁄8˝ O.D. galvanized tubing with front-to-back crossbracing, and 1˝ high impact plastic adjustable bullet feet.

FEATURING NEW 2˝-WIDE EURO-STYLE EDGING

Options / Accessories
			Stainless steel legs			Faucets
			Stainless steel bullet feet			Sink covers
			Lever drains			Waste outlets
			Twist handle drains			Sink kits
			Twist drain brackets			Overflow hole

EAGLE GROUP

100 Industrial Boulevard, Clayton, DE 19938-8903 USA Phone: [phone] • Fax: [phone] www.eaglegrp.com

Foodservice Division: Phone [phone] MHC/Retail Display Divisions: Phone [phone]

Item No.:

Project No.:

S.I.S. No.:

414 Series Coved Corner

One-Compartment Sinks

MODELS:
			414-16-1				414-18-1				414-22-1				414-24-1
			414-16-1-18				414-18-1-18				414-22-1-18				414-24-1-18
			414-16-1-18L				414-18-1-18L				414-22-1-18L				414-24-1-18L
			414-16-1-18R				414-18-1-18R				414-22-1-18R				414-24-1-18R
			414-16-1-24				414-18-1-24				414-22-1-24				414-24-1-24
			414-16-1-24L				414-18-1-24L				414-22-1-24L				414-24-1-24L
			414-16-1-24R				414-18-1-24R				414-22-1-24R				414-24-1-24R

Materials

•Sink bowl: Heavy gauge type 304 stainless steel.

•Top: Drainboards, backsplash and euro-style edging are heavy gauge type 430 stainless steel.

•Legs: 15⁄8˝ (41mm)-diameter heavy-gauge galvanized tubing with plated 12-gauge gussets and high-impact corrosion resistant fully adjustable bullet feet - crossbracing is

1˝ (25mm)-diameter heavy-gauge galvanized tubing.

Design and Construction Features

•Bowl features deep-drawn one-piece seamless construction, using state-of-the-art hydraulic presses.

•Sink bowl has generous radius with a minimum dimension of 3˝ (76mm) and are rectangular for maximum capacity.

•New 20˝ x 16˝ (508 x 406mm) bowl design, with enhanced polishing techniques.

•131⁄2˝ (343mm) water level is standard.

•Swirl-away drainage.

•Leg gusset assemblies welded adjacent to sink bowl for maximum weight support and stability.

•91⁄2˝ (241mm) standard backsplash includes 1˝ (25mm) upturn and tile edge for easy installation and feathering to wall/splash surface.

•“V” creased drainboards for positive drainage.

Mechanical:

•Water supply is 1⁄2˝ (13mm) IPS for hot and cold lines.

•Faucet holes are 11⁄8˝ (29mm) punched on 8˝ (203mm) centers.

•Basket-type waste drain included fits sink bowl’s

31⁄2˝ (89mm) opening and features 11⁄2˝ (38mm) outlet.

Certifications / Approvals

For custom configuration or fabrication needs, contact our SpecFAB Division.
Phone: [phone] • Fax: [phone] • e-mail: [e-mail]	EG20.23 Rev. 03/11

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

<![if ! IE]>

<![endif]>Sinks Compartment-One Corner Coved Series 414 23.EG20 .No Sheet Specification Catalog

Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2011 by the Eagle Group

<![if ! IE]>

<![endif]>414 Series Coved Corner One-Compartment Sinks Catalog Specification Sheet No. EG20.23

Item No.:

Project No.:

S.I.S. No.:

414 Series Coved Corner One-Compartment Sinks

mitered corner of euro-style edging (overhead view)

euro-style edging (side view)

Overall widths

bowl size		Dimension A
in.	mm	in.	mm
20˝ x 16˝	508 x 406	271⁄2˝	699
24˝ x 18˝	610 x 457	313⁄4˝	807
22˝ x 22˝	559 x 559	293⁄4˝	756
24˝ x 24˝	610 x 610	313⁄4˝	807

Drain location for rough-in

bowl size		Dimension B
in.	mm	in.	mm
20˝ x 16˝	508 x 406	14˝	357
24˝ x 18˝	610 x 457	16˝	406
22˝ x 22˝	559 x 559	15˝	381
24˝ x 24˝	610 x 610	16˝	406

Please note the pair of legs located under the OUTER area of drainboard (only on one-compartment sinks with one drainboard)

		BOWL DIMENSIONS					DRAINBOARD				OVERALL DIMENSIONS
		width		length				length			width		length		weight
	model #	in.	mm	in.	mm		quantity	in.	mm		in.	mm	in.	mm	lbs.	kg
414-16-1		20˝	508	16˝	406		0		-		271⁄4˝ 699		231⁄4˝ 591		40	18.1
	414-16-1-18R or L	20˝	508	16˝	406		1	18˝	457		271⁄4˝ 699		387⁄8˝ 987		59	26.8
414-16-1-18		20˝	508	16˝	406		2	18˝	457		271⁄4˝ 699		541⁄2˝ 1384		78	35.4
414-16-1-24R or L		20˝	508	16˝	406		1	24˝	610		271⁄4˝ 699		447⁄8˝ 1140		65	29.5
414-16-1-24		20˝	508	16˝	406		2	24˝	610		271⁄4˝ 699		661⁄2˝ 1689		90	40.8
	414-18-1	24˝	610	18˝	457		0		-		313⁄4˝ 807		251⁄2˝ 648		45	20.4
	414-18-1-18R or L	24˝	610	18˝	457		1	18˝	457		313⁄4˝ 807		403⁄4˝ 1035		64	29.0
414-18-1-18		24˝	610	18˝	457		2	18˝	457		313⁄4˝ 807		56˝	1422	83	37.6
	414-18-1-24R or L	24˝	610	18˝	457		1	24˝	610		313⁄4˝ 807		463⁄4˝ 1188		70	31.8
414-18-1-24		24˝	610	18˝	457		2	24˝	610		313⁄4˝ 807		68˝	1727	95	43.1
	414-22-1	22˝	559	22˝	559		0		-		293⁄4˝ 756		291⁄2˝ 749		55	24.9
	414-22-1-18R or L	22˝	559	22˝	559		1	18˝	457		293⁄4˝ 756		45˝	1143	74	33.6
414-22-1-18		22˝	559	22˝	559		2	18˝	457		293⁄4˝ 756		601⁄2˝ 1537		93	42.2
	414-22-1-24R or L	22˝	559	22˝	559		1	24˝	610		293⁄4˝ 756		51˝	1295	80	36.3
414-22-1-24		22˝	559	22˝	559		2	24˝	610		293⁄4˝ 756		721⁄2˝ 1842		105	47.6
	414-24-1	24˝	610	24˝	610		0		-		313⁄4˝ 807		311⁄2˝ 800		60	27.2
	414-24-1-18R or L	24˝	610	24˝	610		1	18˝	457		313⁄4˝ 807		463⁄4˝ 1188		79	35.8
414-24-1-18		24˝	610	24˝	610		2	18˝	457		313⁄4˝ 807		62˝	1575	98	44.5
	414-24-1-24R or L	24˝	610	24˝	610		1	24˝	610		313⁄4˝ 807		523⁄4˝ 1340		85	38.6
414-24-1-24		24˝	610	24˝	610		2	24˝	610		313⁄4˝	807	74˝	1880	110	49.9

EAGLE GROUP

100 Industrial Boulevard, Clayton, DE 19938-8903 USA Phone: [phone] • Fax: [phone] www.eaglegrp.com

Foodservice Division: Phone [phone]	Printed in U.S.A.
	©2011 by Eagle Group
MHC/Retail Display Divisions: Phone [phone]	Rev. 03/11

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.