Eagle Group 314-16-2 General Manual
Specification Sheet
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Short Form Specifications
Eagle Two-Compartment Sink, model____________, with
2˝-wide “Euro-Style” edging on front and sides. Units
constructed of heavy gauge type 304 stainless steel top and
sink bowls. Sinks to be deep-drawn, seamless, and have all
corners coved. Drainboards, when required, shall be
“V” creased for positive drainage. 9
1˝ upturn and tile edge. Legs to be 15⁄8˝ O.D. galvanized tubing
with front-to-back crossbracing, and 1˝ high impact plastic
adjustable bullet feet.
two-compartment
sink with double
drainboards
1
⁄2˝ high backsplash with
FEATURING
NEW
2˝-WIDE
EURO-STYLE
EDGING
314 Series Coved Corner
Two-Compartment Sinks
MODELS:
314-16-2
314-16-2-18
314-16-2-18L
314-16-2-18R
314-16-2-24
314-16-2-24L
314-16-2-24R
Materials
• Sink bowls: Heavy gauge type 304 stainless steel.
• Top: Drainboards, backsplash and euro-style edging are
heavy gauge type 304 stainless steel.
• Legs: 1
Design and Construction Features
• All bowls have deep-drawn one-piece seamless
• Sink bowls have generous radius with minimum dimension
• New 20˝ x 16˝ (508 x 406mm) bowl design, with enhanced
• 13
• Swirl-away drainage.
• Leg gusset assemblies welded adjacent to sink bowl for
• 9
• “V” creased drainboards for positive drainage.
5
⁄8˝ (41mm)-diameter heavy-gauge galvanized tubing
with plated 12-gauge gussets and high-impact corrosion
resistant fully adjustable bullet feet - crossbracing is
1˝ (25mm)-diameter heavy-gauge galvanized tubing.
construction, using state-of-the-art hydraulic presses.
of 3˝ (76mm) and are rectangular for maximum capacity.
polishing techniques.
1
⁄2˝ (343mm) water level is standard.
maximum weight support and stability.
1
⁄2˝ (248mm) standard backsplash includes 1˝ (25mm)
upturn and tile edge for easy installation and feathering to
wall/splash surface.
314-18-2
314-18-2-18
314-18-2-18L
314-18-2-18R
314-18-2-24
314-18-2-24L
314-18-2-24R
314-22-2
314-22-2-18
314-22-2-18L
314-22-2-18R
314-22-2-24
314-22-2-24L
314-22-2-24R
314-24-2
314-24-2-18
314-24-2-18L
314-24-2-18R
314-24-2-24
314-24-2-24L
314-24-2-24R
EG20.28
314 Series Coved Corner Two-Compartment Sinks
Options / Accessories
Stainless steel legs
Stainless steel bullet feet
Lever drains
Twist handle drains
Twist drain brackets
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2009 by the Eagle Group
Faucets
Sink covers
Waste outlets
Sink kits
Overflow hole
Mechanical:
• Water supply is
• Faucet holes are 11⁄8˝ (29mm) punched on 8˝ (203mm)
centers.
• Basket-type waste drain included fits sink bowls’
1
⁄2˝ (89mm) opening and features 11⁄2˝ (38mm) outlet.
3
Certifications / Approvals
1
⁄2˝ (13mm) IPS for hot and cold lines.
EG20.28 Rev. 06/09
Item No.:
Project No.:
EG20.28
S.I.S. No.:
314 Series Coved Corner Two-Compartment Sinks
Overall widths
mitered corner of
euro-style edging
Catalog Specification Sheet No.
(overhead view)
euro-style edging
(side view)
bowl size Dimension A
in. mm
20˝ x 16˝ 508 x 406 271⁄2˝ 699
24˝ x 18˝ 610 x 457 313⁄4˝ 807
22˝ x 22˝ 559 x 559 293⁄4˝ 756
24˝ x 24˝ 610 x 610 313⁄4˝ 807
Drain location for rough-in
bowl size Dimension B
in. mm
20˝ x 16˝ 508 x 406 14˝ 357
24˝ x 18˝ 610 x 457 16˝ 406
22˝ x 22˝ 559 x 559 15˝ 381
24˝ x 24˝ 610 x 610 16˝ 406
in. mm
in. mm
BOWL DIMENSIONS DRAINBOARD
width length length width length weight
model # in. mm in. mm quantity in. mm in. mm in. mm lbs. kg
314-16-2 20˝ 508 16˝ 406 0-27
314-16-2-18R or L 20˝ 508 16˝ 406 1 18˝ 457 27
314-16-2-18 20˝ 508 16˝ 406 2 18˝ 457 27
314-16-2-24R or L 20˝ 508 16˝ 406 1 24˝ 610 27
314-16-2-24 20˝ 508 16˝ 406 2 24˝ 610 271⁄2˝ 699 841⁄4˝ 2140 114 51.7
314-18-2 24˝ 610 18˝ 457 0-31
314-18-2-18R or L 24˝ 610 18˝ 457 1 18˝ 457 31
314-18-2-18 24˝ 610 18˝ 457 2 18˝ 457 31
314-18-2-24R or L 24˝ 610 18˝ 457 1 24˝ 610 31
314 Series Coved Corner Two-Compartment Sinks
314-18-2-24 24˝ 610 18˝ 457 2 24˝ 610 313⁄4˝ 807 88˝ 2235 125 56.7
314-22-2 22˝ 559 22˝ 559 0-29
314-22-2-18R or L 22˝ 559 22˝ 559 1 18˝ 457 29
314-22-2-18 22˝ 559 22˝ 559 2 18˝ 457 29
314-22-2-24R or L 22˝ 559 22˝ 559 1 24˝ 610 29
314-22-2-24 22˝ 559 22˝ 559 2 24˝ 610 293⁄4˝ 756 961⁄2˝ 2451 130 59.0
314-24-2 24˝ 610 24˝ 610 0-31
314-24-2-18R or L 24˝ 610 24˝ 610 1 18˝ 457 31
314-24-2-18 24˝ 610 24˝ 610 2 18˝ 457 31
314-24-2-24R or L 24˝ 610 24˝ 610 1 24˝ 610 31
314-24-2-24 24˝ 610 24˝ 610 2 24˝ 610 31
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
OVERALL DIMENSIONS
1
⁄2˝ 699 41˝ 1041 64 29.0
1
⁄2˝ 699 565⁄8˝ 1438 83 37.6
1
⁄2˝ 699 721⁄4˝ 1848 102 46.3
1
⁄2˝ 699 625⁄8˝ 1591 89 40.4
3
⁄4˝ 807 451⁄2˝ 1156 75 33.8
3
⁄4˝ 807 603⁄4˝ 1543 94 42.6
3
⁄4˝ 807 76˝ 1930 113 51.3
3
⁄4˝ 807 663⁄4˝ 1696 100 45.4
3
⁄4˝ 756 531⁄2˝ 1359 80 36.3
3
⁄4˝ 756 69˝ 1753 99 44.9
3
⁄4˝ 756 841⁄2˝ 2146 118 53.5
3
⁄4˝ 756 75˝ 1905 105 47.6
3
⁄4˝ 807 571⁄2˝ 1461 90 40.8
3
⁄4˝ 807 723⁄4˝ 1847 109 49.4
3
⁄4˝ 807 88˝ 2235 128 58.1
3
⁄4˝ 807 783⁄4˝ 2000 115 52.2
3
⁄4˝ 807 100˝ 2540 140 63.5
Printed in U.S.A.
©2009 by Eagle Group
Rev. 06/09
Loading...