Eagle SDTCIL-108-16-3 User Manual
Specification Sheet
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Short Form Specifications
Eagle Soiled Dishtables, model _______________. Top to be
16/430, 16/304, or 14/304 stainless steel with all seams
welded, ground smooth, and polished. Front and ends to have
3˝-high upturn with a 1
channels welded to underside. Backsplash is 8˝-high.
1
⁄2˝ opening for dishwasher. 20˝ x 20˝ x 5˝ deep stainless
20
steel prerinse sink with basket drain. Hole for deck mounted
prerinse spray. Rubber scrap block provided. Legs to be 15⁄8˝
O.D. galvanized tubing with 1˝ diameter crossbracing and
adjustable bullet feet (14/304 models come standard with
stainless steel hat channels welded to underside of table,
stainless steel crossbraced legs, and adjustable metal feet).
Options / Accessories *
Undershelf
Stainless steel legs
Stainless steel gussets
Stainless steel feet
1
⁄2˝-diameter rolled edge. Galvanized hat
right-hand model shown
Scrap basket
Rack runner
Prerinse spray units
Soiled Dishtables—
Island Design
MODELS:
SDTCIL-60-16/4
SDTCIL-60-16/3
SDTCIL-60-14/3
SDTCIR-60-16/4
SDTCIR-60-16/3
SDTCIR-60-14/3
SDTCIL-72-16/4
SDTCIL-72-16/3
SDTCIL-72-14/3
SDTCIR-72-16/4
SDTCIR-72-16/3
SDTCIR-72-14/3
Design and Construction Features
• 14 or 16 gauge stainless steel.
• 30˝ (762mm)-wide table with choice of six lengths.
• Left or right hand operation.
• 20˝ x 20˝ x 5˝ (508 x 508 x 127mm) prerinse sink punched
for standard basket drain.
• 8˝ (203mm)-high backsplash.
• Hole supplied for deck-mount prerinse.
• Adjustable non-marking bullet feet with up to 1˝ (25mm)
ad just ment.
1
⁄2˝ (38mm) raised rolled rim on front and end.
• 1
• 15⁄8˝ (41mm)-diameter galvanized legs with welded
1˝ (25mm)-diameter crossbrace.
• Rubber scrap block included.
• All Spec-Master
standard with stainless steel crossbraced legs and gussets,
complete with metal feet.
SDTCIL-84-16/4
SDTCIL-84-16/3
SDTCIL-84-14/3
SDTCIR-84-16/4
SDTCIR-84-16/3
SDTCIR-84-14/3
SDTCIL-96-16/4
SDTCIL-96-16/3
SDTCIL-96-14/3
SDTCIR-96-16/4
SDTCIR-96-16/3
SDTCIR-96-14/3
®
14 gauge type 304 dishtables come
SDTCIL-108-16/4
SDTCIL-108-16/3
SDTCIL-108-14/3
SDTCIR-108-16/4
SDTCIR-108-16/3
SDTCIR-108-14/3
SDTCIL-120-16/4
SDTCIL-120-16/3
SDTCIL-120-14/3
SDTCIR-120-16/4
SDTCIR-120-16/3
SDTCIR-120-14/3
EG50.09
Soiled Dishtables—Island Design
* See Spec Sheet #EG50.07 for full line of options and accessories.
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2012 by the Eagle Group
Certifications / Approvals
EG50.09 Rev. 04/12
EG50.09
Soiled Dishtables—Island Design
(see chart below)
Item No.:
Project No.:
S.I.S. No.:
Catalog Specification Sheet No.
Soiled Dishtables—Island Design
(see chart below)
TOP VIEW
FRONT VIEW
Spec-Master
16 gauge 16 gauge 14 gauge Dimensions
type 430 type 304 type 304 ABweight
model # model # model # description in. mm in. mm lbs. kg
SDTCIL-60-16/4 SDTCIL-60-16/3 SDTCIL-60-14/3 left-hand model 60˝ 1524 111⁄2˝ 292 168 76.2
SDTCIR-60-16/4 SDTCIR-60-16/3 SDTCIR-60-14/3 right-hand model 60˝ 1524 111⁄2˝ 292 168 76.2
SDTCIL-72-16/4 SDTCIL-72-16/3 SDTCIL-72-14/3 left-hand model 72˝ 1829 231⁄2˝ 597 178 80.7
SDTCIR-72-16/4 SDTCIR-72-16/3 SDTCIR-72-14/3 right-hand model 72˝ 1829 231⁄2˝ 597 178 80.7
SDTCIL-84-16/4 SDTCIL-84-16/3 SDTCIL-84-14/3 left-hand model 84˝ 2134 35
SDTCIR-84-16/4 SDTCIR-84-16/3 SDTCIR-84-14/3 right-hand model 84˝ 2134 351⁄2˝ 902 188 85.3
SDTCIL-96-16/4 SDTCIL-96-16/3 SDTCIL-96-14/3 left-hand model 96˝ 2438 471⁄2˝ 1207 198 89.9
SDTCIR-96-16/4 SDTCIR-96-16/3 SDTCIR-96-14/3 right-hand model 96˝ 2438 471⁄2˝ 1207 198 89.9
SDTCIL-108-16/4 SDTCIL-108-16/3 SDTCIL-108-14/3 left-hand model 108˝ 2743 59
SDTCIR-108-16/4 SDTCIR-108-16/3 SDTCIR-108-14/3 right-hand model 108˝ 2743 591⁄2˝ 1511 208 94.3
SDTCIL-120-16/4 SDTCIL-120-16/3 SDTCIL-120-14/3 left-hand model 120˝ 3048 711⁄2˝ 1816 218 98.9
SDTCIR-120-16/4 SDTCIR-120-16/3 SDTCIR-120-14/3 right-hand model 120˝ 3048 71
left-hand model shown
®
SIDE VIEW
1
⁄2˝ 902 188 85.3
1
⁄2˝ 1511 208 94.3
1
⁄2˝ 1816 218 98.9
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
©2012 by Eagle Group
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Printed in U.S.A.
Rev. 04/12
Loading...