Eagle SDFT-12 User Manual

Specification Sheet

Catalog Specification Sheet No.

Item No.:

Project No.:

S.I.S. No.:

Short Form Specifications

Eagle Single-Deep Floor-Trak®High Density Storage System for
Wire Shelving, with non-corrosive aluminum tracks with end
stops. Skate Kits are aircraft quality aluminum with stainless
steel inserts and hardened steel bearings, one kit required for
each mobile unit. System is ADA compliant. Note: Floor-Trak
Kits, Skate Kits, Posts, and Wire Shelving all need to be
ordered separately.

track

skate

end stop

single-deep unit shown

assembled with wire starter unit*

*Wire shelving sold separately.

Single-Deep Floor-Trak®Systems
—for use with Wire Shelving

MODELS:

SDFT-*

®

SDSK-*

* See charts for complete model numbers.

• Floor-Trak®system designed for use with wire
shelving units.

• Consolidates space.

• Low profile, non-corrosive track constructed of stainless
steel and anodized aluminum.

• The system is ADA-compliant.

• Simple and easy to install.

• Easy to add on additional units.

• Open construction allows for the use of cart covers
when required.

• Industrial-type, hardened steel bearings allow loaded units
to glide effortlessly over the track.

Wire Shelving (sold separately)

• Patented QuadTruss
25% stronger.

• Open-wire construction promotes higher visibility and
reduces dust build-up.

• Posts are numbered in 1˝ (25mm) increments for fast and
level assembly.

• Many finishes available—from zinc to stainless steel.

®

design makes shelves up to

EG01.39A

Single-Deep Floor-Trak

®

Systems—for use with Wire Shelving

Options / Accessories

Bumper Brackets
Shim Kit (#912991)
Foot Brake Kit (#MFBK-S)

EAGLE GROUP

Bumper Brackets available:

• Helps prevent shelf unit from tipping over
due to uneven floor or due to unevenly
distributed weight of shelf contents.

• Once installed, brackets hover over track
of Floor-Trak
contact with track unless shelf unit begins
to tip over.

• Easily attaches to skate kit of any
Floor-Trak
of adjoining shelf unit.

• All-welded stainless steel construction,
with heavy duty

®

system, but do not make

®

system, along with post

1

⁄4˝ (6mm)-diameter rod.

Certifications / Approvals

…sold as kits

# of

brackets

for use with included model #

single-deep skate kits 4 SDSKATB-S

…sold individually (hardware included)

model # SKATB-S

100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com

Foodservice Division: Phone [phone]
MHC/Retail Display Divisions: Phone [phone]

For custom configuration or fabrication needs, contact our SpecFAB®Division.

Phone: [phone] • Fax: [phone] • e-mail: [e-mail]

EG01.39A Rev. 04/12

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2012 by the Eagle Group

Item No.:

Project No.:

EG01.39A

S.I.S. No.:

Single-Deep Floor-Trak®Systems—for use with Wire Shelving

Floor Track Kits

Each kit consists of a pair of aluminum tracks with end stops. All hardware and assembly
instructions included.
Note: Not recommended to piece tracks together. Order length needed. Custom lengths
available. Consult factory.

length weight

model # ft. mm lbs. kg

SDFT-19 19´5791 14 6.4
SDFT-20 20´6096 15 6.8
SDFT-21 21´6401 16 7.3
SDFT-22 22´6706 17 7.7
SDFT-23 23´7010 18 8.2
SDFT-24 24´7315 19 8.6
SDFT-25 25´7620 20 9.0
SDFT-26 26´7925 21 9.5
SDFT-27 27´8230 22 10.0
SDFT-28 28´8534 23 10.4
SDFT-29 29´8839 24 10.9
SDFT-30 30´9144 25 11.3

Catalog Specification Sheet No.

model # ft. mm lbs. kg

SDFT-6 6´ 1829 5 2.3
SDFT-7 7´ 2134 5 2.3
SDFT-8 8´ 2438 6 2.7
SDFT-9 9´ 2743 7 3.2
SDFT-10 10´ 3048 8 3.6
SDFT-11 11´ 3353 8 3.6
SDFT-12 12´ 3658 9 4.1
SDFT-13 13´ 3962 10 4.5
SDFT-14 14´4267 11 5.0
SDFT-15 15´4572 11 5.0
SDFT-16 16´4877 12 5.4
SDFT-17 17´5181 13 5.8
SDFT-18 18´5486 14 6.4

Skate Kits

Kit includes two aluminum skates and all nec es sary parts
and hardware. Skates are aircraft-quality aluminum with
stainless steel inserts and hardened steel ball bearings.

Systems—for use with Wire Shelving

®

One kit is required for each mobile unit. Shelves and posts
not included. Weight capacity of 2000 lbs. (907.2 kg) per
mobile section.

Note: When assembling with shelf unit, add 1˝ (25mm) to
width and length of shelf unit.

model # in. mm lbs. kg

SDSK-18 18˝ 457 6 2.7
SDSK-21 21˝ 533 7 3.2
SDSK-24 24˝ 610 7 3.2
SDSK-30 30˝ 762 8 3.6
SDSK-36 36˝ 914 10 4.5

Single-Deep Floor-Trak

width weight

track

end
stop

length weight

skate kit for single-deep systems

EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com

Foodservice Division: Phone [phone]

©2012 by Eagle Group

MHC/Retail Display Divisions: Phone [phone]

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for

typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.

Printed in U.S.A.

Rev. 04/12