Specification Sheet
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Short Form Specifications
Four or five variable angle shelves 18˝ wide x 36˝ or 48˝ long x
69˝ tall. 63˝ post with 5˝ polyurethane casters, two with brakes.
Three dividers per shelf. All components are chrome plated.
four-shelf suture cart
Options / Accessories
Cart covers
Shelf add-ons
Additional dividers
Angled shelf clamp
Suture Carts
MODELS:
SCH1836C-4
SCH1848C-4
SCH1836C-5
SCH1848C-5
SCH1836C
Design and Construction Features
• Open wire design and slope of shelves allow instant
identification and reduces dirt and dust build-up.
• Chrome plated wire shelves, each includes three dividers.
• Entire assembly can be put together in minutes without the
use of any tools.
• Design and features provide a multitude of applications.
• Provided with four or five wire shelves, each adjustable on
1˝ (25mm) vertical increments without the use of tools.
Slope of shelves is also adjustable from 0° to 30°, simply
by raising or lowering front or back truss brace.
• All shelves and truss braces are chrome plated. Posts are
also chrome plated 1˝ (25mm)-diameter 16 gauge steel
tubular wall, which ensures structural strength and stability
in any use.
• Entire assembly is further stabilized at the top and bottom
with three-sided truss reinforcement braces for increased
strength and stability.
• 5˝ (127mm) swivel casters are chrome plated with
polyurethane tread.
• Optional additional dividers and shelves available.
• Optional shelf clamp provides an ensured means during
transport. Two clips included per shelf.
SCH1848C
SCH18C
CZ-54-1836
CZ-54-1848
CZ-63-1836
CZ-63-1848
CZC-54-1836
CZC-54-1848
CZC-63-1836
CZC-63-1848
EG05.08
Suture Carts
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2009 by the Eagle Group
EG05.08 Rev. 02/09
EG05.08
Suture Carts
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Suture Carts
FRONT VIEW SIDE VIEW
(note: 4-shelf unit shown)
shelf shelf
width length height weight
model # in. mm in. mm in. mm lbs. kg description
SCH1836C-4 18˝ 457 36˝ 914 60˝ 1524 62 28.1 4-shelf unit
SCH1848C-4 18˝ 457 48˝ 1219 60˝ 1524 66 29.9 4-shelf unit
SCH1836C-5 18˝ 457 36˝ 914 69˝ 1753 73 33.1 5-shelf unit
SCH1848C-5 18˝ 457 48˝ 1219 69˝ 1753 81 36.7 5-shelf unit
Options for Suture Carts
Cart Covers
Models below are with a zipper. To indicate cart covers with velcro, replace prefix
“CZ” with “CV”. Example: CVC-63-1848
shelf shelf
uncoated coated width length height weight
model # model # in. mm in. mm in. mm lbs. kg
CZ-54-1836 CZC-54-1836 18˝ 457 36˝ 914 54˝ 1372 3 1.4
CZ-54-1848 CZC-54-1848 18˝ 457 48˝ 1219 54˝ 1372 4 1.8
CZ-63-1836 CZC-63-1836 18˝ 457 36˝ 914 63˝ 1600 3 1.4
CZ-63-1848 CZC-63-1848 18˝ 457 48˝ 1219 63˝ 1600 4 1.8
Shelf Add-Ons
length weight
model # in. mm lbs. kg description
SCH1836C 36˝ 914 3 1.4 3´ shelf add-on
SCH1848C 48˝ 1219 5 2.3 4´ shelf add-on
Additional Dividers
length weight
model # in. mm lbs. kg
SCH18C 18˝ 457 1 0.5
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
©2009 by Eagle Group
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Printed in U.S.A.
Rev. 02/09