Eagle S14-20-1-SL User Manual
Specification Sheet
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Short Form Specifications
Eagle Stainless Steel Fabricated Sink, model ______________.
Type 304 stainless steel sink throughout. Sink bowls, available
3
in 20˝ x 20˝ or 28˝ x 20˝, are coved with full
⁄4˝ radius and
feature 14˝ water level. Drainboards, when required, shall be
“V” creased for positive drainage. 8˝-high backsplash with
3
upturn and tile edge. Legs to be 15⁄8˝ O.D. Features stainless
steel gussets, front-to-rear and end-to-end stainless steel
crossbracing, and adjustable stainless steel bullet feet.
#S14-20-3-18-SL sink
Options / Accessories
Lever drain
Lever drain with overflow
Twist handle drain
Overflow hole
Faucets
Stainless Steel Fabricated Sinks
—S14 Series
MODELS:
S14-20-1-SL
⁄4˝
S14-20-2-18R-SL
S14-20-2-18L-SL
S14-20-2-18-SL
Materials
• Sink bowls: 14 gauge type 304 stainless steel.
• Top: Drainboards, backsplash and edging are heavy gauge
type 304 stainless steel.
5
• Legs: 1
⁄8˝ (41mm)-diameter 18 gauge stainless steel tubing
with stainless steel gussets and fully adjustable stainless
steel bullet feet.
• Crossbracing: 1˝ (25mm)-diameter heavy-gauge stainless
steel tubing, with aluminum connectors.
• Front apron: 18 gauge stainless steel.
Design and Construction Features
• Sink bowls have minimum radius of
rectangular for maximum capac i ty.
• 20˝ x 20˝ (508 x 508mm) and 28˝ x 20˝ (508 x 711mm)
bowls available.
• 14˝ (356mm) water level is standard.
• Crossbracing runs front-to-back and end-to-end.
• Swirl-away drainage.
• 8˝ (203mm) standard backsplash includes
and tile edge for easy installation and feathering to
wall/splash surface.
• Leg gussets assemblies welded adjacent to sink bowl(s).
• “V” creased drainboards for positive drainage.
Mechanical:
• Faucet holes are 1
8˝ (203mm) centers.
• Basket-type waste drain included fits sink bowls’ 3
centered opening and features 1
S14-20-3-18R-SL
S14-20-3-18L-SL
S14-20-3-18-SL
S14-20-3-24L-SL
S14-20-3-24-SL
S14-28-3-18-SL
S14-20-3-24R-SL
3
⁄4˝ (19mm), and are
3
⁄4˝ (19mm) upturn
1
⁄8˝ (30mm)-diameter, punched on
1
⁄2˝ (38mm) outlet.
1
⁄2˝ (89mm)
EG20.14
Stainless Steel Fabricated Sinks—S14 Series
Packaging:
• Wooden skid packing.
EAGLE GROUP
Certifications / Approvals
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-2065 • e-mail: quotes@eaglegrp.com
EG20.14 Rev. 02/14
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2014 by the Eagle Group
Item No.:
Project No.:
EG20.14
S.I.S. No.:
Stainless Steel Fabricated Sinks—S14 Series
TOP VIEW
Catalog Specification Sheet No.
Stainless Steel Fabricated Sinks—S14 Series
FRONT VIEW SIDE VIEW
(Note: Model #S14-20-3-18-SL shown)
Sink with One Compartment
bo w l dimen s io n s dr ain b o a r d
width length length width length
model # in. mm in. mm quantity in. mm in. mm in. mm
S14-20-1-SL 20˝ 508 20˝ 508 0-27˝ 686 29˝ 737
o v e r a l l d imen s io n s
Sinks with Two Compartments
bo w l dimen s io n s dr ain b o a r d
width length length width length
model # in. mm in. mm quantity in. mm in. mm in. mm
S14-20-2-18R-SL 20˝ 508 20˝ 508 1 18˝ 457 27˝ 686 67
S14-20-2-18L-SL 20˝ 508 20˝ 508 1 18˝ 457 27˝ 686 67
S14-20-2-18-SL 20˝ 508 20˝ 508 2 18˝ 457 27˝ 686 81˝ 2057
o v e r a l l d imen s io n s
1
⁄2˝ 1715
1
⁄2˝ 1715
Sinks with Three Compartments
bo w l dimen s io n s dr ain b o a r d
width length length width length
model # in. mm in. mm quantity in. mm in. mm in. mm
S14-20-3-18R-SL 20˝ 508 20˝ 508 1 18˝ 457 27˝ 686 89
S14-20-3-18L-SL 20˝ 508 20˝ 508 1 18˝ 457 27˝ 686 89
S14-20-3-18-SL 20˝ 508 20˝ 508 2 18˝ 457 27˝ 686 103˝ 2616
S14-20-3-24R-SL 20˝ 508 20˝ 508 1 24˝ 610 27˝ 686 95
S14-20-3-24L-SL 20˝ 508 20˝ 508 1 24˝ 610 27˝ 686 95
S14-20-3-24-SL 20˝ 508 20˝ 508 2 24˝ 610 27˝ 686 115˝ 2921
S14-28-3-18-SL* 28˝ 711 20˝ 508 2 18˝ 457 35˝ 889 103˝ 2616
* #S14-28-3-18-SL features two sets of faucet holes.
o v e r a l l d imen s io n s
1
⁄2˝ 2273
1
⁄2˝ 2273
1
⁄2˝ 2426
1
⁄2˝ 2426
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
©2014 by Eagle Group
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Printed in U.S.A.
Rev. 02/14
Loading...