Eagle QA1430 User Manual

Specification Sheet

Catalog Specification Sheet No.

Item No.:

Project No.:

S.I.S. No.:

Short Form Specifications

Eagle Quad-Adjust®Wire Shelf, model _________________.

®

EAGLEbrite

zinc, chrome, Valu-Master®Grey Epoxy, Valu-Gard
Green Epoxy, EAGLEgard®Green Epoxy with MICROGARD®, or
stainless steel finish. Custom colors available. Patented

®

QuadTruss

design. Specially designed for addition or removal
of a shelf without disassembling entire shelf unit. Shelf features
corners that interlock with post-mounted collars. Numerically
grooved posts are 1˝ diameter.

PATENTED!

(Patent #7,992,731)

channel of shelf

corner fits into slot

of collar attached

to split sleeve

Quad-Adjust®Wire Shelving

MODELS:

®

QA14*
QA18*
QA21*

* See charts for complete model numbers.

• Patented Quad-Truss®shelves (patent #5,390,803) for
increased strength and durability.

• Shelves feature special interlocking corners that fit in slots
of collars mounted to split sleeves, allowing addition or
removal of a shelf without the need to disassemble the
entire shelf unit. Patent #7,992,731.

• Tapered split sleeves create a pos i tive lock that becomes
stronger as the load increases.

• Posts are numbered in increments of 1˝ (25mm) to ensure
fast and level assembly.

• Leveling feet are provided to help com pen sate for un even
floor surfaces.

• Shelf utilizes a pincer-type design with the mat wire
sandwiched between the two top truss wires, adding
significant strength and distributing the entire load without
stress and strain on the welds.

• Finishes available are EAGLEbrite
grey epoxy, Valu-Gard®green epoxy, EAGLEgard®green
epoxy with MICROGARD®, and stainless steel. Custom
colors available.

QA24*
QAR14*
QAR18*

QAR21*
QAR24*

P7-*
P14-*
P18-*

®

zinc, chrome, Valu-Master

P33-*
P54-*
P63-*

P74-*
P86-*

EG01.14

Quad-Adjust

®

Wire Shelving

®

Weight capacities:

• Shelves up to 48˝ (1219mm) in length can support an
evenly distributed static load of 800 lbs. (362.9 kg).

• Shelves of 60˝ and 72˝ (1524 and 1829mm) length
can support an evenly distributed static load of 600 lbs.
(272.2 kg).

Quad-Adjust

®

shelf unit

• IMPORTANT: Stationary units should not exceed 2400 lbs.
(1088.6 kg) per set of four posts.

• IMPORTANT: Maximum load for mobile units is to be one

Options / Accessories

Casters
Ledges
Dividers
Foot plates

EAGLE GROUP

Rods & tabs
Aluminum split sleeves
Shelf markers
“S” hooks

the following, whichever is less:
– 3 times the weight rating for one caster, or
– 1000 lbs. (453.6 kg) per set of four posts.

• For maximum rigidity on mobile applications, shelves with
welded collars recommended for top and bottom of unit.

Certifications / Approvals

100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com

Foodservice Division: Phone [phone]
MHC/Retail Display Divisions: Phone [phone]

For custom configuration or fabrication needs, contact our SpecFAB®Division.

Phone: [phone] • Fax: [phone] • e-mail: [e-mail]

EG01.14 Rev. 03/12

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2012 by the Eagle Group

EG01.14

Item No.:

Project No.:

S.I.S. No.:

Catalog Specification Sheet No.

Wire Shelving

®

Quad-Adjust

Quad-Adjust

®

shelf

®

Quad-Adjust

shelf
corner mounted onto
post (split sleeves
underneath)

TOP VIEW

SIDE VIEWFRONT VIEW

To specify finish (available for all components listed), place the corresponding suffix after the model number.

suffix “Z” = EAGLEbrite
suffix “C” = Chrome suffix “VG” = Valu-Gard

®

suffix “V” = Valu-Master®Gray Epoxy suffix “E” = EAGLEgard®Green Epoxy

®

Green Epoxy suffix “S” = stainless steel

Reverse Mat ShelvesShelves

model # in. mm lb. kg

width x length weight

QA1424 14˝ x 24˝ 356 x 610 6 2.7
QA1430 14˝ x 30˝ 356 x 762 7 3.2
QA1436 14˝ x 36˝ 356 x 914 8 3.6
QA1442 14˝ x 42˝ 356 x 1067 9 4.1
QA1448 14˝ x 48˝ 356 x 1219 10 4.6
QA1454 14˝ x 54˝ 356 x 1372 12 5.5
QA1460 14˝ x 60˝ 356 x 1524 14 6.4
QA1472 14˝ x 72˝ 356 x 1829 17 7.7

QA1824 18˝ x 24˝ 457 x 610 7 3.2
QA1830 18˝ x 30˝ 457 x 762 8 3.6
QA1836 18˝ x 36˝ 457 x 914 9 4.1
QA1842 18˝ x 42˝ 457 x 1067 11 5.0
QA1848 18˝ x 48˝ 457 x 1219 12 5.5
QA1854 18˝ x 54˝ 457 x 1372 15 6.8
QA1860 18˝ x 60˝ 457 x 1524 17 7.7
QA1872 18˝ x 72˝ 457 x 1829 20 9.1

QA2124 21˝ x 24˝ 533 x 610 8 3.6
QA2130 21˝ x 30˝ 533 x 762 9 4.1
QA2136 21˝ x 36˝ 533 x 914 11 5.0
QA2142 21˝ x 42˝ 533 x 1067 12 5.5
QA2148 21˝ x 48˝ 533 x 1219 14 6.4
QA2154 21˝ x 54˝ 533 x 1372 16 7.3
QA2160 21˝ x 60˝ 533 x 1524 18 8.2
QA2172 21˝ x 72˝ 533 x 1829 24 10.9

QA2424 24˝ x 24˝ 610 x 610 9 4.1
QA2430 24˝ x 30˝ 610 x 762 11 5.0
QA2436 24˝ x 36˝ 610 x 914 13 5.9
QA2442 24˝ x 42˝ 610 x 1067 15 6.8
QA2448 24˝ x 48˝ 610 x 1219 16 7.3
QA2454 24˝ x 54˝ 610 x 1372 19 8.6
QA2460 24˝ x 60˝ 610 x 1524 21 9.5
QA2472 24˝ x 72˝ 610 x 1829 26 11.8

model # in. mm lb. kg

QAR1424 14˝ x 24˝ 356 x 610 6 2.7
QAR1436 14˝ x 36˝ 356 x 914 8 3.6
QAR1448 14˝ x 48˝ 356 x 1219 10 4.6

QAR1824 18˝ x 24˝ 457 x 610 7 3.2
QAR1836 18˝ x 36˝ 457 x 914 9 4.1
QAR1848 18˝ x 48˝ 457 x 1219 12 5.5

QAR2124 21˝ x 24˝ 533 x 610 8 3.6
QAR2136 21˝ x 36˝ 533 x 914 11 5.0
QAR2148 21˝ x 48˝ 533 x 1219 14 6.4

QAR2424 24˝ x 24˝ 610 x 610 9 4.1
QAR2436 24˝ x 36˝ 610 x 914 13 5.9
QAR2448 24˝ x 48˝ 610 x 1219 16 7.3

Posts

Numerically grooved in 1˝ (25mm) increments.
Includes post cap and leveling bolt.

model # in. mm lb. kg

P7- 7˝ 178 1.0 0.5
P14- 14˝ 356 1.0 0.5
P18- 18˝ 457 1.5 0.7
P33- 33˝ 838 2.0 0.9
P54- 54˝ 1372 3.0 1.4
P63- 63˝ 1600 3.5 1.6
P74- 74˝ 1880 4.0 1.8
P86- 86˝ 2184 5.0 2.3

Notes:

- EAGLEbrite®posts are clear epoxy coated for use in dry
or wet environments.
MICROGARD®antimicrobial protection standard on all

­EAGLEgard®posts.

- For mobile application, add prefix “C” to model number.
Example: CP14-E. See Spec Sheet EG01.05 for
information about casters available.

width x length weight

height weight

EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone] • www.eaglegrp.com

Foodservice Division: Phone [phone]

©2012 by Eagle Group

MHC/Retail Display Divisions: Phone [phone]

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for

typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.

Printed in U.S.A.

Rev. 03/12