Eagle PHT20B-240 User Manual
Item No.:
Project No.:
S.I.S. No.:
Specification Sheet
Spec-Master®Electric Hot Food
Short Form Specifications
Eagle Hot Food Tables, Spec-Master®series, model
_____________ enclosed base design. Top and body to be
heavy gauge type 430 stainless steel (Open Front or Sliding
Doors). Beaded top openings to be 12
compartments to be 8˝ deep, galvanized, and insulated on all
four sides and bottom with 1˝ fiberglass or equal. Recessed
control panel with individual thermostatic cont
compartment fitted with 750-watt tubular heating element
above the insulated bottom. 6´ cord and plug. Complete unit
wired to master toggle switch with indicator light. Furnished
with polycarbonate cutting board. Includes 5˝-diameter swivel
plate casters (two with brake).
unit with open front
shown with optional accessories
Options / Accessories
Hardwood cutting boards
1000-watt heater*
Spillage pans
Rolltop cover
Food pans/insets
* For 208V and 240V models only. To order, add suffix “-1”. Example: PHT30B-120-1
* See Catalog Sheet #EG30.18 for more information on Flex-Master®overshelves
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2010 by the Eagle Group
3
⁄32˝ x 203⁄32˝. Heating
rols. Each
Tray slides/shelves
Top adapters
Serving shelves
Decorative laminates
Spec-Master
®
marine edge
Tables—Enclosed Base, Portable
MODELS:
PHT2CB-120
PHT2CB-240*
PHT2OB-120
PHT2OB-240*
* These units are available in three-phase. To order, add suffix “-3”. Ex: HT3CB-240-3
Construction
• Table body and top constructed of highly polished heavy
gauge 430 series stainless steel
• Top has die-stamped beaded openings measuring
123⁄32˝ x 203⁄32˝ (307 x 510mm).
• A poly cutting board 8˝ wide x
mounted on drop brackets located on control side of unit.
• 5˝ (127mm) diameter NSF-approved ball bearing swivel
casters (two with brake).
• Push bar attached to end panel at operator’s right.
• Full perimeter bumper guards.
Controls
• Individual thermostatic controls offer a wide range of
temperature settings.
• Indicator light remain
Heat Compartments
• Each heat compartment is 8˝ (203mm) deep and lined with
22 gauge galvanized steel.
• Each compartment is insulated on all four sides and bottom
with 1˝ (25mm) thick fiberglass or equal.
Electrical
• Each compartment is fitted with a 750-watt tubular element
above the insulated bottom.
• A six-foot cord with plug will extend from the righthand
control side as standard equipment.
• Complete unit is wired to a master toggl
indicator light.
• 120-volt units are single phase. 240-volt units available in
single- and three-phase.
Sliding Doors (when indicated)
• 22 gauge stainless steel construction complete with
recessed stainless steel handle.
• Doors sit within an exclusive rollerless track assembly,
providing easier cleaning and lower maintenance.
Certifications / Approvals
New York MEA 376-84-E
PHT3CB-120
PHT3CB-240*
PHT3OB-120
PHT3OB-240*
on continuously while control is on.
PHT4CB-120
PHT4CB-240*
PHT4OB-120
PHT4OB-240*
.
1
⁄2˝ (203 x 13mm) thick is
e switch with
EG30.05 Rev. 05/10
PHT5CB-240*
PHT5OB-240*
PHT6CB-240*
PHT6OB-240*
Catalog Specification Sheet No.
EG30.05
Spec-Master
®
Electric Hot Food Tables—Enclosed Base, Portable
Item No.:
Project No.:
EG30.05
S.I.S. No.:
Spec-Master®Electric Hot Food Tables—Enclosed Base, Portable
Catalog Specification Sheet No.
SIDE VIEWFRONT VIEW
(note: unit with sliding doors shown)
# of top length weight SINGLE-PHASE THREE-PHASE SINGLE-PHASE THREE-PHASE
openings in. mm lbs. kg volts watts amps model # amps model # amps model # amps model #
2 353⁄4˝ 908 200 90.7 120V 1500W 12.5A PHT2OB-120 n/a 12.5A PHT2CB-120 n/a
2 353⁄4˝ 908 200 90.7 240V 1500W 6.3A PHT2OB-240 5.4A PHT2OB-240-3 6.3A PHT2CB-240 5.4A PHT2CB-240-3
3 503⁄4˝ 1289 240 108.9 120V 2250W 18.8A PHT3OB-120 n/a 18.8A PHT3CB-120 n/a
3 503⁄4˝ 1289 240 108.9 240V 2250W 9.4A PHT3OB-240 5.4A PHT3OB-240-3 9.4A PHT3CB-240 5.4A PHT3CB-240-3
4 661⁄4˝ 1683 280 127.0 120V 3000W 25.0A PHT4OB-120 n/a 25.0A PHT4CB-120 n/a
4 661⁄4˝ 1683 280 127.0 240V 3000W 12.5A PHT4OB-240 8.3A PHT4OB-240-3 12.5A PHT4CB-240 8.3A PHT4CB-240-3
5 813⁄4˝ 2076 320 145.2 240V 3750W 15.7A PHT5OB-240 10.8A PHT5OB-240-3 15.7A PHT5CB-240 10.8A PHT5CB-240-3
6 971⁄4˝ 2470 363 164.7 240V 4500W 18.8A PHT6OB-240 10.8A PHT6OB-240-3 18.8A PHT6CB-240 10.8A PHT6CB-240-3
Note: 240-volt units also available in 208 volt. To order, replace suffix “-240” with suffix “-208”. Example: PHT3OB-208
RECEPTACLE CONFIGURATIONS REQUIRED
Electric Hot Food Tables—Enclosed Base, Portable
®
15A 125V 20A 250V 30A 250V 30A 125V 50A 125V
model # model # model # model # model #
PHT2OB-120 PHT2OB-240 PHT6OB-240 PHT3OB-120 PHT4OB-120
PHT2CB-120 PHT2CB-240 PHT6OB-240 PHT3CB-120 PHT4CB-120
Spec-Master
furnished with
NEMA 5-15 plug
PHT3OB-240
PHT3CB-240
PHT4OB-240
PHT4CB-240
PHT5OB-240
PHT5CB-240
furnished with
NEMA 6-20 plug
furnished with
NEMA 6-30 plug
furnished with
NEMA 5-30 plug
WITH OPEN FRONT WITH SLIDING DOORS
FLEX-MASTER®Overshelf Kits
Both kits include two 16/304 overshelves and four
30˝ (762mm) posts. Add suffix specified to order
kit (example: DHT2-120-FMU), or design your
furnished with
NEMA 5-50 plug
20A 3Ø 250V
all
three-phase
240V models
furnished with
NEMA 15-20 plug
own using standard components from EG30.18.
description suffix
10˝ (254mm) overshelves -FM
15˝ (381mm) overshelves, -FMU
plus one ladle rack
add
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
©2010 by Eagle Group
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Printed in U.S.A.
Rev. 05/10
Loading...