Eagle PDS1872BL User Manual

Specification Sheet

Catalog Specification Sheet No.

Item No.:

Project No.:

S.I.S. No.:

Short Form Specifications

Eagle Plate Display Shelving. Reverse mat black epoxy wire
shelf (model PDS1827BL) comes with one pair of truss rails
and one pair of truss assemblies. Shelf features a 1˝ ledge on
all sides. Note: Posts sold separately.

four plate display shelves and posts

shown assembled

Options / Accessories

Dividers
Hooks

Plate Display Shelving

MODELS:

PDS1872BL
P33-BL
P54-BL

Design and Construction Features

• Assembly is a simple two-step exercise:

1) Snap the split sleeves onto a numbered post (sold
separately) over the number of your choice;

2) Slide a shelf collar or rail collar over the split sleeves.

A positive lock between collar and post is created without
the use of any tools.

• Open-wire construction promotes higher visibility, allows
light to pass through the shelves, permits greater air
circulation which helps reduce moisture and dust build-up,
and increases the effectiveness of fire-suppression systems.

• Tapered split sleeves, made of high-temperature-resistant
ABS plastic, create a positive lock that becomes stronger as
the load increases.

• 18˝ x 72˝ (457 x 1829mm) reverse mat wire shelves feature
built-in 1˝ (25mm)-high ledges on all four sides.

• Pair of end-to-end truss rails and front-to-back truss
assemblies come with each reverse mat shelf.

• Truss rails, attached to truss assemblies that connect to
front and rear posts, support top of displayed plates while
bottom of plates rest behind front ledges of wire shelves.

• Posts available in heights ranging from 33˝ to 86˝
(838 to 2184mm).

• Black epoxy finish is applied to wire shelves, truss rails, and
truss assemblies.

P63-BL
P74-BL
P86-BL

EG01.37

Plate Display Shelving

EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com

Foodservice Division: Phone [phone]
MHC/Retail Display Divisions: Phone [phone]

For custom configuration or fabrication needs, contact our SpecFAB®Division.

Phone: [phone] • Fax: [phone] • e-mail: [e-mail]

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group

EG01.37 Rev. 09/08

EG01.37

Plate Display Shelving

Catalog Specification Sheet No.

Item No.:

Project No.:

S.I.S. No.:

Plate Display Shelving

FRONT VIEW

(Note: Plate display shelves shown with posts in assembled unit)

Reverse Mat Shelf for Plate Display Shelving

Black epoxy finish. Each shelf comes with one pair of end-to-end
truss rails and one pair of front-to-back truss assemblies.

width length weight

model # in. mm in. mm lbs. kg

PDS1872BL 18˝ 457 72˝ 1829 30 13.6

Shelves and posts sold separately.

EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com

Foodservice Division: Phone [phone]
MHC/Retail Display Divisions: Phone [phone]

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for

typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.

SIDE VIEW

Posts for Plate Display Shelving

Black epoxy finish. Posts are numbered in increments of
1˝ (25mm) to ensure fast and level assembly. Leveling feet
are included to help compensate for uneven floor surfaces.

post height weight

model # in. mm lbs. kg

P33-BL 33˝ 838 2.0 0.9
P54-BL 54˝ 1372 3.0 1.4
P63-BL 63˝ 1600 3.5 1.8
P74-BL 74˝ 1880 4.0 1.8
P86-BL 86˝ 2184 5.0 2.3

Printed in U.S.A.

©2008 by Eagle Group

Rev. 09/08