Eagle OUR-2640-3 User Manual

Specification Sheet

Catalog Specification Sheet No.

Item No.:

Project No.:

S.I.S. No.:

Short Form Specifications

Eagle Panco 26 Series Pan Rack, aluminum model
_________________. Aluminum construction with frame and
cross supports joined with two-piece die-stamped aluminum

1

gusset, riveted to frame and cross supports. 1

⁄4˝ x 15⁄8˝ tray

slides with raised beads to minimize friction, slides riveted to

1

frame. Slide spacing to be 5˝, 3˝, or 2

⁄4˝ to accommodate 12,
18, 20, or 24 full size sheet pans. Furnished with 5˝-diameter
swivel casters. Unit shipped knocked down.

Eagle Panco 26 Series Pan Rack, stainless steel model
_________________. Stainless steel construction with

7

1˝ square tubular frame and cross supports. 1

⁄16˝ x 17⁄8˝
stainless steel tray slide with a raised bead edge riveted to
stainless steel vertical tube. Slide spacing to be 5˝, 3˝, or 2˝ to
accommodate 11, 18, 20, or 30 full size sheet pans. Furnished
with 5˝-diameter casters. Unit shipped assembled.

Panco®26 Series Racks

MODELS:

OUR-2611-5
OUR-2618-3
OUR-2620-3
OUR-2624-2

Features on Aluminum Models

• Frame and supports are 1˝ (25mm) square aluminum tubing
with .063˝ wall. Each frame and cross support is joined with
extruded aluminum junctions.

• Tray slides are extruded aluminum angle 1
wide x 0.1˝ thick (32 x 41 x 3mm) bearing surface with two
raised beads providing a minimum of friction. Slides are
welded to vertical posts.

• Casters are 5˝ (127mm)-diameter NSF-approved,
non-marking swivel stem plated casters with polymer tread.

• Side-to-side crossbracing.

• Shipped knocked down—factory assembly available.

Features on Stainless Steel Models

• Frame and cross supports are 1˝ (25mm) square heavy
gauge wall stainless tubing with all-welded construction.

• Tray slides are 18 gauge stainless steel, 1
(37 x 48mm) with raised bead to minimize friction, riveted
to vertical uprights.

• Casters are 5˝ (127mm)-diameter NSF-approved, non­marking swivel stem plated casters with polymer tread.

• Front-to-back and side-to-side crossbracing.

• Shipped fully welded.

OUR-2611-5-SR
OUR-2618-3-SR
OUR-2620-3-SR
OUR-2624-2-SR

1

⁄4˝ high x 15⁄8˝

7

⁄16˝ high x 17⁄8˝ lip

EG60.01

Panco

®

26 Series Racks

Options / Accessories

Casters with locking brakes
Rotary donut bumpers
Perimeter bumpers*
Vertical corner bumpers

26 Series rack

EAGLE GROUP

Pan stops

*Factory-welded assembly required for all aluminum models specified with

perimeter bumpers. See catalog sheet EG60.24 for Panco®accessories.

Certifications / Approvals

100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com

Foodservice Division: Phone [phone]
MHC/Retail Display Divisions: Phone [phone]

For custom configuration or fabrication needs, contact our SpecFAB®Division.

Phone: [phone] • Fax: [phone] • e-mail: [e-mail]

EG60.01 Rev. 07/08

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group

EG60.01

Panco®26 Series Racks

Aluminum Racks

Catalog Specification Sheet No.

model # in. mm in. mm in. mm in. mm capacity lbs. kg

26 Series Racks

®

OUR-2611-5 281⁄2˝ 724 19˝ 483 69˝ 1753 5˝ 127 12 37 16.8
OUR-2618-3 28
OUR-2620-3 281⁄2˝ 724 20˝ 508 72˝ 1829 3˝ 76 20 53 24.0
OUR-2624-2 281⁄2˝ 724 20˝ 508 663⁄8˝ 1686 21⁄4˝ 57 24 56 25.4

Item No.:

Project No.:

S.I.S. No.:

FRONT VIEW SIDE VIEW

overall dimensions sliding

width depth height space pan weight

1

⁄2˝ 724 20˝ 508 663⁄8˝ 1686 3˝ 76 18 43 19.5

Panco

Stainless Steel Racks

model # in. mm in. mm in. mm in. mm capacity lbs. kg

OUR-2611-5-SR 28
OUR-2618-3-SR 281⁄2˝ 724 20˝ 508 663⁄8˝ 1686 3˝ 76 18 129 58.5
OUR-2620-3-SR 28
OUR-2624-2-SR 281⁄2˝ 724 20˝ 508 663⁄8˝ 1686 21⁄4˝ 57 24 161 73.0

EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com

Foodservice Division: Phone [phone]
MHC/Retail Display Divisions: Phone [phone]

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for

typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.

width depth height space pan weight

1

⁄2˝ 724 20˝ 508 663⁄8˝ 1686 5˝ 127 11 112 50.8

1

⁄2˝ 724 20˝ 508 721⁄2˝ 1842 3˝ 76 20 158 71.6

FRONT VIEW SIDE VIEW

overall dimensions sliding

Printed in U.S.A.

©2008 by Eagle Group

Rev. 07/08