Eagle C14 User Manual

Specification Sheet

Catalog Specification Sheet No.

Item No.:

Project No.:

S.I.S. No.:

Short Form Specifications

Frame construction from wire shelf components in stainless
steel or chrome plating. 1˝-diameter posts grooved on
1˝ increments. Hanger bars with 2
on 11⁄2˝ centers staggered vertically, or with a 1˝-diameter
hanger tube are adaptations for storing gowns.

rack with hanger slots

rack with hooks

Options / Accessories

Hangers
Foot plates

1

⁄2˝ centered slots, with hooks

rack with hanger tube

Freestanding Gowning Racks
with Wire Shelving Components

MODELS:

EP24*
C24*

* See charts on back for complete model numbers.

Racks with Hanger Slots

• Hanger bar constructed of heavy gauge type 304 stainless
steel with hanger slots spaced on 2

• 1˝ (25mm) square 3-sided frame along the bottom.

• Finishes available are chrome and electropolished finish.

Racks with hooks

• Top wire shelf features 2 gauge hooks welded to underside
of top wire shelf.

• Standard wire undershelf.

• Finishes available are chrome and electropolished finish.

Racks with hanger tube

• 1˝ (25mm)-diameter full-length hanger tube, grooved at
1˝ (25mm) increments, is suspended on underside of wire
shelf via two 2-gauge hooks, one on each end.

• 1˝ (25mm) square H-frame along the bottom.

• Finishes available are chrome and stainless steel finish.

Wire Shelving Components

• All units feature wire shelf with patented QuadTruss
construction (patent #5,390,803):
– Top mat assembly constructed of 10 gauge mat wires

welded to full-length 6 gauge inside support wires and
serpentine trusses.

– At front and rear of shelf, mat wires are welded to a

four-wire truss assembly constructed of a 2 gauge bottom
wire, a 6 gauge serpentine truss wire which creates a
bridge-like reinforcement, and two 6 gauge top wires—
one directly below mat wires and one directly above,
providing a pincer hold on mat wires.

• Posts are 1˝ (25mm) diameter, grooved on 1˝ (25mm)
increments, and provided with leveling feet. Optional foot
plates available to affix gowning rack to the floor.

(Wall Mounted Gowning Racks available. See catalog sheet EG04.08)

EP14*
C14*

S24*

1

⁄2˝ (64mm) centers.

®

EG04.01B

Freestanding Gowning Racks with Wire Shelving Components

EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com

Foodservice Division: Phone [phone]
MHC/Retail Display Divisions: Phone [phone]

For custom configuration or fabrication needs, contact our SpecFAB®Division.

Phone: [phone] • Fax: [phone] • e-mail: [e-mail]

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group

EG04.01B Rev. 10/08

Item No.:

Project No.:

EG04.01B

S.I.S. No.:

Freestanding Gowning Racks with Wire Shelving Components

Racks with Hanger Slots

Hanger slots on standard 21⁄2˝ (64mm) centers.

electropolished chrome width length weight number of

model # model # in. mm in. mm lbs. kg hanger slots

EP2448-GR C2448-GR 24˝ 610 48˝ 1219 30 13.6 17
EP2460-GR C2460-GR 24˝ 610 60˝ 1524 37 16.8 22
EP2472-GR C2472-GR 24˝ 610 72˝ 1829 40 18.1 27

Catalog Specification Sheet No.

Number of Hanger Slots on Optional Spacing

unit length on 11⁄2˝ (38mm) on 2˝ (51mm) on 3˝ (76mm)
in. mm centers centers centers

48˝ 1219 29 22 15
60˝ 1524 37 28 28
72˝ 1829 45 34 23

Racks with Hooks

Hooks, on all four shelf sides, are spaced on 11⁄2˝ (38mm) centers and are staggered
1˝ (25mm) vertically hook-to-hook for ease of access.

electropolished chrome width length weight number of

model # model # in. mm in. mm lbs. kg hooks

EP1448-GRH C1448-GRH 14˝ 356 48˝ 1219 56 25.4 72
EP1460-GRH C1460-GRH 14˝ 356 60˝ 1524 68 30.8 88
EP1472-GRH C1472-GRH 14˝ 356 72˝ 1829 80 36.3 104

Racks with Hanger Tube

Features 1˝ (25mm) diameter tubular bar which easily mounts to underside of
wire shelf. Facilitates laminar flow.

stainless steel chrome width length weight

model # model # in. mm in. mm lbs. kg

S2448-GRT C2448-GRT 24˝ 610 48˝ 1219 27 12.2
S2460-GRT C2460-GRT 24˝ 610 60˝ 1524 34 15.4

Freestanding Gowning Racks with Wire Shelving Components

S2472-GRT C2472-GRT 24˝ 610 72˝ 1829 37 16.7

EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com

Foodservice Division: Phone [phone]
MHC/Retail Display Divisions: Phone [phone]

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for

typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.

Printed in U.S.A.

©2008 by Eagle Group

Rev. 10/08