Eagle BM1220FW-120T User Manual
Specification Sheet
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Short Form Specifications
Eagle Drop-In Style Rectangular Food Warmer, model
________________. Constructed of one-piece deep-drawn
type 304, 18-8 stainless steel. (Top mount, bottom mount, or
insulated bottom mount) unit available with (infinite control /
thermostat), pilot light, control panel (drain) with heating
element securely clamped to underside of unit.
top mount hot food unit
bottom mount hot food unit
Drop-In Style
Rectangular Food Warmers
MODELS:
TM1220FW-120T
TM1220FW-240T
TM1220FW-240T6
TM1220FW-277T6
BM1220FW-120T
BM1220FW-120TI
Design and Construction Features
• Units available in top mount, bottom mount, and insulated
bottom mount.
• All units are constructed of one-piece deep-drawn 304
series 18-8 stainless steel with coved corners and feature
heating element securely clamped
to under side, allowing for service
through bottom.
• The insulated bottom mount hot food units feature exterior
wrapper of galvanized steel fully insulated with dense
fiberglass.
• Available with either infinite or thermostatic controls.
• Available with or without drains.
BM1220FW-240T
BM1220FW-240TI
BM1220FW-240T6
BM1220FW-240TI6
BM1220FW-277T6
BM1220FW-277TI6
TMP
EG35.11
Drop-In Style Rectangular Food Warmers
insulated bottom mount hot food unit
Options / Accessories
Mounting plates (for top-mount units)
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2012 by the Eagle Group
Certifications / Approvals
EG35.11 Rev. 03/12
EG35.11
Item No.:
Project No.:
S.I.S. No.:
Catalog Specification Sheet No.
Drop-In Style Rectangular Food Warmers
top mount hot food unit
bottom mount hot food unit
insulated bottom mount hot
food unit
Units with Infinite Controls*
Infinite control offers high and low selections along with eight other temperature settings.
TOP MOUNT BOTTOM MOUNT INSULATED BOTTOM MT width x depth weight
model # model # model # electrical data in. mm lbs. kg
TM1220FW-120 BM1220FW-120 BM1220FW-120I 120V, 1200W, 10.0A 137⁄8˝ x 217⁄8˝ 352 x 556 13 5.9
TM1220FW-240 BM1220FW-240 BM1220FW-240I 240V, 1200W, 5.0A 137⁄8˝ x 217⁄8˝ 352 x 556 13 5.9
Units with Thermostat Controls*
Thermostatic control—snap acting type—degree range of 86° to 550°F for rapid heat recovery.
TOP MOUNT BOTTOM MOUNT INSULATED BOTTOM MT width x depth weight
model # model # model # electrical data in. mm lbs. kg
TM1220FW-120T BM1220FW-120T BM1220FW-120TI 120V, 1200W, 10.0A 137⁄8˝ x 217⁄8˝ 352 x 556 13 5.9
TM1220FW-240T BM1220FW-240T BM1220FW-240TI 240V, 1200W, 5.0A 137⁄8˝ x 217⁄8˝ 352 x 556 13 5.9
208/
TM1220FW-240T6 BM1220FW-240T6 BM1220FW-240TI6
TM1220FW-277T6 BM1220FW-277T6 BM1220FW-277TI6 900/1200/1600W, 137⁄8˝ x 217⁄8˝ 352 x 556 13 5.9
* For optional drain, add suffix “-D” to model number. Example: TM1220FW-120-D
1200/1600W, 5.8/6.6A
240V,
208/
240/277V,
4.3/5.0/5.8A
Top Mounting Plates for Laminated Plastic or Wood Countertops
For use with top mount units.
model # in. mm
TMP 15
overall dimensions
1
⁄4˝ x 231⁄4˝ 387 x 591
7
⁄8˝ x 217⁄8˝ 352 x 556 13 5.9
13
Cutouts
Note: Consult installation instructions prior to making cutouts.
Cutout for Control Panel (part #305198, for all Rectangular Drop-In Food Warmers):
51⁄16˝ x 211⁄16˝ (129 x 68mm). Minimum 103⁄4˝ (273mm) from top to centerline of cutout.
Cutout for Top Mount Series:
Requires 3˝ (76mm) side and rear clearances
1
and 4
⁄2˝ (114mm) front clearance.
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Cutout for Bottom Mount Series:
©2012 by Eagle Group
Printed in U.S.A.
Rev. 03/12
Loading...