Eagle BD24-18L User Manual
Specification Sheet
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Short Form Specifications
Eagle 1800 Series Blender Module, model ______________.
On all models: top, front, and backsplash to be heavy gauge
1
type 304 stainless steel. Liquid waste chute with 1
⁄2˝ drain,
strainer, faucet and tail piece. Blender recess with 15-amp,
120-volt GFCI receptacle mounted for field wiring with
5
waterproof cover plate. 1
⁄8˝ O.D. galvanized tubular legs with
adjustable bullet feet. All units with ice bin available with or
without sealed-in 7-circuit post-mix cold plate.
1
Models with sink: 10˝ x 14˝ x 9
⁄2˝-deep sink to be heavy gauge
type 304 stainless steel, with splash-mount faucet.
Models with ice bin: 151⁄2˝ x 193⁄4˝ x 8˝ ice bin to be heavy gauge
type 304 stainless steel and fully insulated, with 11⁄2˝ drain.
1
Models with ice bin and bottle holders: 15
⁄2˝ x 193⁄4˝ x 8˝ ice bin
to be heavy gauge type 304 stainless steel and fully insulated.
Removable bottle holders on either one side of ice bin or both
sides of ice bin.
1
Models with ice bin and workboard: 15
⁄2˝ x 193⁄4˝ x 8˝ ice bin to
be heavy gauge type 304 stainless steel and fully insulated.
24˝ embossed workboard section.
1800 Series Blender Modules
MODELS:
BD24-18L
BD24-18R
BM3-18L
BM3-18R
BM50-18L
BM50-18R
BM50R-18L
BM50L-18R
BM62-18L
BM62-18R
BM3-18L-7
BM3-18R-7
BM50-18L-7
BM50-18R-7
Design and Construction Features
• Stainless steel type 304 body.
• 12˝ (305mm) wide blender recess—may be located either
side. 14˝ (356mm) wide on 50˝ and 62˝ (1270 and
1575mm) models.
• 15-amp, 120-volt receptacle mounted for field wiring.
• 75 lb. (32 kg) ice capacity.
• Liquid waste chute with 1
1
⁄2˝ (38mm) drain, strainer, faucet,
and tail piece.
• High-impact, corrosion-resistant, fully-adjustable bullet feet.
• Fabricated ice bin.
• All units with ice bin available with or without sealed-in
7-circuit post-mix cold plate.
BM50R-18L-7
BM50L-18R-7
BM62-18L-7
BM62-18R-7
EG40.05
1800 Series Blender Modules
Options / Accessories
Stainless steel leg kits (see below)
#BD24-18R blender module
Optional Stainless Steel Leg Kits
add suffix # description
-SL stainless steel leg assemblies
-SLF stainless steel leg assemblies & stainless steel feet
-SLG stainless steel leg assemblies & stainless steel gussets
-SLGF stainless steel leg assemblies, stainless steel feet & gussets
EAGLE GROUP
Certifications / Approvals
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com
EG40.05 Rev. 08/11
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2011 by the Eagle Group
EG40.05
1800 Series Blender Modules
24˝ (610mm) Models
Item No.:
Project No.:
S.I.S. No.:
model # in. mm in. mm lbs. kg
BD24-18L 20˝ 495 24˝ 610 40 18.1
BD24-18R 20˝ 495 24˝ 610 40 18.1
Catalog Specification Sheet No.
36˝ (914mm) Models
model # in. mm in. mm lbs. kg
BM3-18L 20˝ 495 36˝ 914 67 30.4
BM3-18R 20˝ 495 36˝ 914 67 30.4
width length weight
width length weight
UNITS WITH COLD PLATE
BM3-18L-7 20˝ 495 36˝ 914 97 44.0
BM3-18R-7 20˝ 495 36˝ 914 97 44.0
50˝ (1270mm) Models
with ice bin centered between bottle holders
model # in. mm in. mm lbs. kg
BM50-18L 20˝ 495 50˝ 1270 90 40.8
BM50-18R 20˝ 495 50˝ 1270 90 40.8
width length weight
UNITS WITH COLD PLATE
BM50-18L-7 20˝ 495 50˝ 1270 120 54.4
BM50-18R-7 20˝ 495 50˝ 1270 120 54.4
1800 Series Blender Modules
50˝ (1270mm) Models
with ice bin centered between bottle
holders and blender recess
model # in. mm in. mm lbs. kg
BM50R-18L 20˝ 495 50˝ 1270 90 40.8
BM50L-18R 20˝ 495 50˝ 1270 90 40.8
UNITS WITH COLD PLATE
BM50R-18L-7
BM50L-18R-7
width length weight
20˝ 495 50˝ 1270 120 54.4
20˝ 495 50˝ 1270 120 54.4
TOP VIEW
TOP VIEW
TOP VIEW
TOP VIEW
FRONT VIEW
(model #BD24-18L shown)
FRONT VIEW
(model #BM3-18L shown)
FRONT VIEW
(model #BM50-18L shown)
FRONT VIEW
(model #BM50R-18L shown)
SIDE VIEW
SIDE VIEW
SIDE VIEW
SIDE VIEW
62˝ (1575mm) Models
model # in. mm in. mm lbs. kg
BM62-18L 20˝ 495 62˝ 1575 110 49.9
BM62-18R 20˝ 495 62˝ 1575 110 49.9
UNITS WITH COLD PLATE
BM62-18L-7
BM62-18R-7
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
width length weight
20˝ 495 62˝ 1575 140 63.5
20˝ 495 62˝ 1575 140 63.5
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
TOP VIEW
FRONT VIEW
(model #BM62-18L shown)
SIDE VIEW
©2011 by Eagle Group
Printed in U.S.A.
Rev. 08/11
Loading...