Eagle A1436 User Manual

Specification Sheet
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Short Form Specifications
Eagle Add-A-Shelf (Adjustable, Reverse Mat) Wire Shelving, model __________. Patented QuadTruss collar allows for addition or removal of a shelf to an entire unit. Top and bottom shelves must be standard design and fixed in place. 1˝-diameter numerically grooved posts.
shelves and posts combined to form a unit
Options / Accessories
Ledges Dividers Shelf markers
®
(EAGLEbrite®, chrome, black, red, white)
®
design for increased strength. Special
Add-A-Shelf
®
Adjustable Wire Shelving
MODELS:
A1436* A1448* A1836* A1848* A1860* A2136* A2148* A2160* A2436* A2448*
* See charts on back for complete model numbers.
Design and Construction Features
• Special collar allows addition or removal of shelf without disassembling the entire unit.
• Patented QuadTruss®design* (patent #5,390,803) featured on Add-A-Shelf®Adjustable Shelves* for increased strength and durability.
• 300 lb. (136.1 kg) weight capacity per shelf using an evenly distributed load.
• 1˝ (25mm)-diameter numerically grooved posts, with post cap and leveling feet.
• Tapered plastic split sleeves.
• Shelf collars interlock to make shelving erection simple.
• Available in widths of 14˝, 18˝, 21˝, and 24˝ (356, 457, 533, and 610mm).
• Use Add-A-Shelf Top and bottom shelves of unit must be standard shelves (see Catalog Sheet EG01.00).
Note: QuadTruss®design is featured on Add-A-Shelf®Adjustable Shelves only,
*
and not featured on Add-A-Shelf
A2460* D1436* D1448* D1836* D1848* D2136* D2148* D2436* D2448* P7-*
®
shelves for intermediate shelves only.
®
Reverse Mat Shelves.
P14-* P33-* P54-* P63-* P74-* P86-* A208891 ADD-A-CLAMP ADD-A-CLAMP-BL
EG01.11A
Add-A-Shelf
®
Adjustable Wire Shelving
Foodservice Division: Phone 800-441-8440 MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2012 by the Eagle Group
Certifications / Approvals
EG01.11A Rev. 04/12
EG01.11A
Add-A-Shelf®Adjustable Wire Shelving
Item No.:
Project No.:
S.I.S. No.:
Add-A-Shelf®Adjustable Shelves — Patent #5,884,567
Catalog Specification Sheet No.
*
Add-A-Shelf
Black. Packed four per bag. Quantity of four included with each shelf.
Adjustable Wire Shelving
®
Plastic split sleeves required. Model #: PLASTIC SPLIT SLEEVES
Add-A-Shelf®Post Clamps
Add-A-Shelf
model # in. mm in. mm lbs. kg
A1436* 14˝ 356 36˝ 914 8 3.6 A1448* 14˝ 356 48˝ 1219 10 4.6
A1836* 18˝ 457 36˝ 914 9 4.1 A1848* 18˝ 457 48˝ 1219 12 5.5 A1860* 18˝ 457 60˝ 1524 15 6.8
A2136* 21˝ 533 36˝ 914 11 5.0 A2148* 21˝ 533 48˝ 1219 14 6.4 A2160* 21˝ 533 60˝ 1524 17 7.7
A2436* 24˝ 610 36˝ 914 13 5.9 A2448* 24˝ 610 48˝ 1219 16 7.3 A2460* 24˝ 610 60˝ 1524 21 9.5
To specify finish, place the corresponding suffix after the model number.
suffix “Z” – EAGLEbrite suffix “C” – Chrome suffix “W” – White
model #
A208891
model # finish
ADD-A-CLAMP zinc ADD-A-CLAMP-BL black epoxy
width length weight
®
zinc suffix “BL” – Black suffix “R” – Red
®
Collars — Patent #D 395,000
Note: Add-A-Shelf
Add-A-Shelf
collar
Add-A-Shelf
post clamp
®
is not recommended for mobile application.
Add-A-Shelf®Reverse Mat Shelves — Patent #5,884,567
model # in. mm in. mm lbs. kg
D1436* 14˝ 356 36˝ 914 8 3.6 D1448* 14˝ 356 48˝ 1219 10 4.6
D1836* 18˝ 457 36˝ 914 9 4.1 D1848* 18˝ 457 48˝ 1219 12 5.5
D2136* 21˝ 533 36˝ 914 11 5.0 D2148* 21˝ 533 48˝ 1219 14 6.4
D2436* 24˝ 610 36˝ 914 13 5.9 D2448* 24˝ 610 48˝ 1219 16 7.3
*
To specify finish, place the corresponding suffix after the model number.
suffix “Z” – EAGLEbrite suffix “C” – Chrome suffix “W” – White
Posts for Add-A-Shelf
model # in. mm lbs. kg
P7-* 178 0.8 0.4
®
®
P14-* 14˝ 356 1.0 0.5 P33-* 33˝ 838 2.0 0.9 P54-* 54˝ 1372 3.0 1.4 P63-* 63˝ 1600 3.5 1.8 P74-* 74˝ 1880 4.0 1.6 P86-* 86˝ 2184 5.0 2.3
*
To specify finish, place the corresponding suffix after the model number.
suffix “Z” – EAGLEbrite suffix “C” – Chrome suffix “W” – White
width length weight
®
zinc suffix “BL” – Black suffix “R” – Red
®
height weight
®
zinc suffix “BL” – Black
suffix “R” – Red
Assembly is a simple 3-step exercise:
1.
1) Snap the split sleeves onto a post over the number of your choice.
2) Slide the Add-A-Shelf®collar over the split sleeves. When the collar is
together a positive lock is cre at ed
without the use of any tools.
2.
3.
3) Place shelf over collar to complete.
Foodservice Division: Phone 800-441-8440
©2012 by Eagle Group
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Printed in U.S.A.
Rev. 04/12
Loading...