Eagle 502078, CSCC2468-DS User Manual
Specification Sheet
Short Form Specifications
“Clean” design includes safety edges on all doors and panels,
sloped bottom shelf, and doors with integral drain systems.
Removable interior shelf brackets accommodate up to six
shelves on full-height models and four on half-height models.
Item No.:
Project No.:
S.I.S. No.:
Stainless Steel
Closed Case Carts
MODELS:
CSCC2633-DS
CSCC2633-DSST
CSCC2648-DS
CSCC2648-DSST
CSCC4933M-DS
CSCC4933M-DSST
CSCC4933-DS
CSCC4933-DSST
502954
502955
502077
502078
502951
Catalog Specification Sheet No.
EG05.18
Stainless Steel Closed Case Carts
#CSCC2648DS-6
single-width case cart
Design and Construction Features
• Type 304 stainless steel construction.
• Sloped floors for drainage.
• Bumpers on all corners.
• 3˝ x 5˝ (76 x 127mm) document holder.
• Push handle on one end.
• Slots, at 3˝ (76mm) intervals, accept shelves and drawers.
• Carts offered in single or double width, plus a variety of
casters and internal components available.
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2009 by the Eagle Group
EG05.18 Rev. 02/09
Project No.:
EG05.18
To order Stainless Steel Closed Case Cart…
STEP 1: Select cart body.
Single-Width
Catalog Specification Sheet No.
WITH 3˝ x 5˝ *
CARD
HOLDER
model # model # interior slots in. mm in. mm in. mm in. mm in. mm
CSCC2633-DS CSCC2633-DSST 7 27
CSCC2648-DS CSCC2648-DSST 12 27
* To order unit with 8
Double-Width
WITH 3˝ x 5˝ *
CARD
HOLDER
model # model # post in. mm in. mm in. mm in. mm in. mm
CSCC4933-DS CSCC4933-DSST no 27
CSCC4933M-DS CSCC4933M-DSST yes 27
* To order unit with 81⁄2˝ x 11˝ (216 x 279mm) card holder, replace “-DS” in model number with “-DL”. Example: CSCC4933-DLST
WITH 3˝ x 5˝ *
CARD HOLDER
& SECURITY TAB
1
⁄2˝ x 11˝ (216 x 279mm) card holder, replace “-DS” in model number with “-DL”. Example: CSCC2633-DL
WITH 3˝ x 5˝ *
CARD HOLDER
& SECURITY TAB
number of width length height width length
5
⁄8˝ 702 323⁄8˝ 829 39˝ 991 243⁄16˝ 614 329⁄16˝ 827
5
⁄8˝ 702 323⁄8˝ 829 54˝ 1372 243⁄16˝ 614 329⁄16˝ 827
with
center width length height width length
5
⁄8˝ 702 55˝ 1397 39˝ 991 243⁄16˝ 614 481⁄4˝ 1226
5
⁄8˝ 702 55˝ 1397 39˝ 991 243⁄16˝ 614 481⁄4˝ 1226
Item No.:
S.I.S. No.:
overall dimensions inner dimensions
overall dimensions inner dimensions
STEP 2: Select set of four casters.
Add suffix to end of model number (example: CSCC2633-DS-1).
CHROME STAINLESS
add add
suffix # suffix # description
-1 -6 5˝ (127mm)-diameter, (4) swivel
-2 -7A 6˝ (152mm)-diameter, (4) swivel
Stainless Steel Closed Case Carts
-3 -7 5˝ (127mm)-diameter, (3) swivel, (1) swivel lock
-4 -8 6˝ (152mm)-diameter, (2) swivel, (2) swivel brake
-5 -9 6˝ (152mm)-diameter, (1) swivel, (2) swivel brake, (1) swivel lock
STEP 3: Select internal components.
Stainless Steel Shelves
FOR SINGLE-WIDE FOR DOUBLE-WIDE
CARTS CARTS
model # model # description
502954 502955 perforated shelf
503077 503078 wire shelf
Shelf/Drawer Bearer Package
Stainless steel shelf/drawer brackets designed to mount shelves and drawers.
model # description
502951 pair of brackets
caster mounted to cart
wire shelf
perforated shelf
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
©2009 by Eagle Group
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Printed in U.S.A.
Rev. 02/09
Loading...