Eagle 500772 User Manual
Specification Sheet
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Drawers for Stainless Steel
and Hardwood Tables
Drawer Capacity Per Table
Drawers can be centered, left or right.
table length 15˝ x 20˝ (381 x 508mm) 20˝ x 20˝ (508 x 508mm) *
in. mm drawer capacity per table drawer capacity per table
24˝ 610 00
30˝ 762 1 centered 0
36˝ 914 1 centered 1 centered
48˝ 1219 1 centered; or 1 left & 1 right 1 centered
60˝ 1524 1 centered; or 1 left & 1 right 1 centered; or 1 left & 1 right
72˝ 1829 3 (1 centered, 1 left, 1 right) 1 centered; or 1 left & 1 right
84˝ 2134 4 1 centered; or 1 left & 1 right
96˝ 2438 4 (2 left, 2 right) 2 (1 left, 1 right)
108˝ 2743 4 (2 left, 2 right) 4 (2 left, 2 right)
120˝ 3048 4 (2 left, 2 right) 4 (2 left, 2 right)
132˝ 3353 6 (3 left, 3 right) 4 (2 left, 2 right)
144˝ 3658 6 (3 left, 3 right) 4 (2 left, 2 right)
* Holes are predrilled for 20˝ x 20˝ drawers only.
MODELS:
502941
500772
502942
501571
502975
Drawers*…
• Includes full-extension zinc-plated steel slides with rubber
stops.
• Type 430 stainless steel.
• To specify drawer assemblies only for hardwood tables, you
must order model #605500 mounting kit along with drawer
selected.
• To specify drawer assemblies for custom equipment
(fabricated through SpecFAB
construction, you must order model #605499 mounting kit
along with drawer selected.
…with Pull Flange
model # in. mm lbs. kg
502941 ** 20˝ x 15˝ x 5˝ 508 x 381 x 127 13 5.8
drawer with pull flange
500772 20˝ x 20˝ x 5˝ 508 x 508 x 127 13 5.8
** Tables must be field drilled for mounting.
502976
503006
503007
502948
502949
502950
503010
503011
®
) which requires angle frame
width x length x height weight
EG10.13A
Drawers
…with Pull Flange and Full Front
• Hemmed safety pull handle.
model # in. mm lbs. kg
502942 ** 20˝ x 15˝ x 5˝ 508 x 381 x 127 25 11.3
501571 20˝ x 20˝ x 5˝ 508 x 508 x 127 25 11.3
drawer with pull flange and full front
** Tables must be field drilled for mounting.
* No locks available for these drawers.
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-2065 • e-mail: quotes@eaglegrp.com
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2016 by the Eagle Group
width x length x height weight
EG10.13A Rev. 02/16
Item No.:
Project No.:
EG10.13A
S.I.S. No.:
Drawers for Stainless Steel and Hardwood Tables
Drawers with Polymer Slides *
• Includes 1⁄2˝ (13mm)-thick polycarbonate grooved friction slides.
• To specify drawer assemblies for tabletops with box marine edge, you must order one of the
following based on the table width, along with drawer selected
- #611383 for 24˝ (610mm)-wide tables
- #611384 for 30˝ (762mm)-wide tables
drawer with polymer slides
Catalog Specification Sheet No.
Drawers
- For tables 36˝ (914mm) and wider, consult factory.
• For standard worktables only, not for equipment using angle frame construction.
• Weight capacity up to 20 lbs. (9.0 kg).
* No locks available for these drawers.
For all
24˝ (610mm)-wide
Standard Tables
width x length x height weight weight weight
in. mm model # lbs. kg model # lbs. kg model # lbs. kg
20˝ x 15˝ x 5˝ 508 x 381 x 127 502976 ** 13 5.8 503007 ** 13 5.8 503011 ** 13 5.8
20˝ x 20˝ x 5˝ 508 x 508 x 127 502975 *** 13 5.8 503006 13 5.8 503010 13 5.8
** Tables must be field drilled for mounting.
*** Drawer #502975 will protrude beyond tabletop width.
For all 30˝ and 36˝
(787 and 914mm)-wide
Standard Tables
For 36˝ (914mm)-wide Tables
with Framing Specified at
1
⁄8˝ (765mm) Center Lines
30
Polymer Drawers
• Made of heavy gauge polymer.
• Includes pull flange and built-in drawer stop.
width x length x height weight
7
⁄8˝ x 19˝ x 6˝ 352 x 483 x 152 13 5.8
polymer drawer
model # in. mm lbs. kg
502948 137⁄8˝ x 19˝ x 3˝ 352 x 483 x 76 9 4.1
502949 13
502950 137⁄8˝ x 19˝ x 9˝ 352 x 483 x 229 18 8.2
Drawer Kits for Stainless Steel Worktables
• Factory-installed.
• Order at time of worktable order.
add *
suffix # description
-D1 20˝ x 20˝ x 5˝ enclosed drawer assembly (#501572)
-D2 20˝ x 20˝ x 5˝ drawer with pull flange and full front (#501571)
-D3 20˝ x 20˝ x 5˝ drawer with pull flange (#500772)
* Example: T3048SE-BS-D1
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
©2016 by Eagle Group
Printed in U.S.A.
Rev. 02/16
Loading...