Eagle 4PEK User Manual

Specification Sheet

Catalog Specification Sheet No.

Item No.:

Project No.:

S.I.S. No.:

Wire and Solid Shelving Components and Accessories— Split Sleeves, Post Components,

black plastic label holder

Plastic Label Holders for Standard Shelving

Snaps onto shelf edge. Provides easy identification of shelf contents or section. Clear markers hold 1˝ to 1 Also available in gray or black which hold 11⁄4˝ (32mm) high labels.

Plastic Label Holders for Reverse Mat Shelves also available— see spec sheet #EG01.03E.

marker fits shelf

length gray black clear length

in. mm model # model # model # in. mm

3˝ 76 A204331 A206216 A208746 all lengths 13˝ 330 A206196 A206217 A208747 18˝ 457 19˝ 483 A206197 A206218 A208749 24˝ 610 25˝ 635 A206198 A206219 A208750 30˝ 762 31˝ 787 A206199 A206220 A208751 36˝ 914 37˝ 940 A223747 A223748 A223749 42˝ 1067 43˝ 1092 A206200 A206221 A208752 48˝ 1219 45˝ 1143 A212494 A225208 A217621 48˝ 1219 55˝ 1397 A206201 A206222 A208753 60˝ 1524 67˝ 1702 n/a n/a A222144 72˝ 1829

⁄4˝ (25 to 32mm) high labels.

Rods & Tabs

Used to enclose rear or sides of shelving units to prevent contents from falling. Also used to partition shelving units by positioning rods interior to shelves. Each rod comes with four tabs.

chrome steel height model # model # in. mm

R54-C R54-S 54˝ 1372 R63-C R63-S 63˝ 1600 R74-C R74-S 74˝ 1880 R86-C R86-S 86˝ 2184

stainless

rod with

tab in place

Joining Clamps

Use these, and two additional posts, to create various solid shelving add-on configurations. Two required per shelf.

model #: A203078

joining clamp

Miscellaneous

MODELS:

A2* B201023 R*-C R*-S S-HOOKS-SK

* See charts for complete model numbers.

Plastic Split Sleeves

Four included with each shelf. Packed four per bag.

model #

PLASTIC SPLIT SLEEVE

Aluminum Split Sleeves

Used for conductive purposes. Set of four.

model # description

A208909 with zinc rings A208908 with s/s rings

Plastic Conductive Split Sleeves

Packed four per bag.

model #: A219236

Security “S” Hook

Discourages separation of adjoined shelf units. Hardware included.

model #: S-HOOKS-SK

“S” Hook

Joins individual wire shelf units end-to-end, back-to-back, or at right angles. Two required per shelf connection.

model #: A200012

PLASTIC SPLIT SLEEVE 4PEK POST CAP COLLAR PLUG

security “S” hook

LEVELING FOOT POST CLAMP GLIDES FOOT PLATE*

plastic split sleeve

aluminum split sleeves and ring

EG01.03D

Wire and Solid Shelving Components and Accessories—Split Sleeves, Post Components...

plastic conductive split sleeves

“S” hook

EAGLE GROUP 100 Industrial Boulevard, Clayton, DE 19938-8903 USA Phone: 302-653-3000 • Fax: 302-653-2065 www.eaglegrp.com

Foodservice Division: Phone 800-441-8440 MHC/Retail Display Divisions: Phone 800-637-5100

For custom configuration or fabrication needs, contact our SpecFAB®Division.

Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com

EG01.03D Rev. 04/11

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Item No.:

Project No.:

EG01.03D

S.I.S. No.:

Wire and Solid Shelving Split Sleeves, Post Components, Miscellaneous

Post Extension Kit and Components

Screw posts together with double-threaded bolt and extra foot casting, includes components.

AS A KIT

Catalog Specification Sheet No.

model # item

4PEK post extension kit

AS INDIVIDUAL PARTS

model # item

A200868 double-threaded bolt B201023 wall bracket A207351 casting

Please note:

DO NOT attempt to use any higher com bi na tions than P54 and P86 maximum, 140˝ (3556mm) total. Any combinations higher than 86˝ (2184mm) must be attached to walls using wall brack et on post ad ja cent to wall. Place units only against wall, not in center of room.

Collar Plug

Fills shelf corner openings where posts have been eliminated by use of “S” hooks.

model #: COLLAR PLUG

Post Cap

Fits inside 15⁄8˝ (41mm)-diameter post end openings at top of shelving unit.

model #: POST CAP

Leveling Foot

Use these to accommodate for uneven floors.

model #: LEVELING FOOT

Casting

Stabilizes leveling foot.

model #: A203568

collar plug

post cap

casting

leveling foot

Post Clamp

Provides maximum strength when shelving units are connected by clamping posts together securely.

chrome black

model # model #

POST CLAMP A214169

post clamp

Protective Glides

Fits under leveling foot to protect floors from abrasion.

model #: GLIDES

EAGLE GROUP 100 Industrial Boulevard, Clayton, DE 19938-8903 USA Phone: 302-653-3000 • Fax: 302-653-2065 www.eaglegrp.com

Foodservice Division: Phone 800-441-8440 MHC/Retail Display Divisions: Phone 800-637-5100

Wire and Solid Shelving Components and Accessories—Split Sleeves, Post Components...

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for

typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.

glide

Foot Plates

These allow unit to be bolted to the floor. Can be used without bolts when a wider foot is desired.

SQUARE FOOT PLATES

chrome black epoxy stainless steel

model # model # model #

A207199 A226104 A208627

TRIANGULAR FOOT PLATES

chrome black epoxy stainless steel

model # model # model #

FOOT PLATE FOOT PLATE-BL FOOT PLATE-S

“SPACE-SAVING” SQUARE FOOT PLATES

chrome black epoxy stainless steel

model # model # model #

A226093 A226105 A226096

triangular

square

“space-saving”

square

Printed in U.S.A.

Rev. 04/11