Eagle 414-24-3-18-18L, 414-22-3-24 User Manual
Specification Sheet
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Short Form Specifications
Eagle Three-Compartment Sink, model____________, with
2˝-wide “Euro-Style” edging on front and sides. Sink bowls are
heavy gauge type 304 stainless steel, with 13
deep drawn, seamless and have all corners coved. Top—
including backsplash, and drainboards (when required)—is
heavy gauge type 430 stainless steel. Drainboards shall be “V”
creased for positive drainage. 9
upturn and tile edge. Legs to be 15⁄8˝ O.D. galvanized tubing
with front-to-back crossbracing, and 1˝ high impact plastic
adjustable bullet feet.
three-compartment sink
with double drainboards
(faucet not included)
1
⁄2˝ high backsplash with 1˝
1
⁄2˝ water level,
FEATURING
NEW
2˝-WIDE
EURO-STYLE
EDGING
414 Series Coved Corner
Three-Compartment Sinks
MODELS:
414-16-3
414-16-3-18
414-16-3-18L
414-16-3-18R
414-16-3-24
414-16-3-24L
414-16-3-24R
Materials
• Sink bowls: Heavy gauge type 304 stainless steel.
• Top: Drainboards, backsplash and euro-style edging are
heavy gauge type 430 stainless steel.
• Legs: 1
Design and Construction Features
• All bowls have deep-drawn one-piece seamless
• Sink bowls have generous radius with minimum dimension
• New 20˝ x 16˝ (508 x 406mm) bowl design, with enhanced
• 13
• Swirl-away drainage.
• Leg gusset assemblies welded adjacent to sink bowl for
• 9
• “V” creased drainboards for positive drainage.
5
⁄8˝ (41mm)-diameter heavy-gauge galvanized tubing
with plated 12-gauge gussets and high-impact corrosion
resistant fully adjustable bullet feet - crossbracing is
1˝ (25mm)-diameter heavy-gauge galvanized tubing.
construction, using state-of-the-art hydraulic presses.
of 3˝ (76mm) and are rectangular for maximum capacity.
polishing techniques.
1
⁄2˝ (343mm) water level is standard.
maximum weight support and stability.
1
⁄2˝ (241mm) standard backsplash includes 1˝ (25mm)
upturn and tile edge for easy installation and feathering to
wall/splash surface.
414-18-3
414-18-3-18
414-18-3-18L
414-18-3-18R
414-18-3-24
414-18-3-24L
414-18-3-24R
414-22-3
414-22-3-18
414-22-3-18L
414-22-3-18R
414-22-3-24
414-22-3-24L
414-22-3-24R
414-24-3
414-24-3-18
414-24-3-18L
414-24-3-18R
414-24-3-24
414-24-3-24L
414-24-3-24R
EG20.25
414 Series Coved Corner Three-Compartment Sinks
Options / Accessories
Stainless steel legs
Stainless steel bullet feet
Lever drains
Twist handle drains
Twist drain brackets
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFabAB®and Retail Display are divisions of Eagle Group. ©2009 by the Eagle Group
Faucets
Sink covers
Waste outlets
Sink kits
Overflow hole
Mechanical:
• Water supply is
• Faucet holes are 11⁄8˝ (29mm) punched on 8˝ (203mm)
centers
; two sets of faucet holes are punched where indicated
on chart (back page).
• Basket-type waste drain included fits sink bowls’
31⁄2˝ (89mm) opening and features 11⁄2˝ (38mm) outlet.
Certifications / Approvals
1
⁄2˝ (13mm) IPS for hot and cold lines.
EG20.25 Rev. 06/09
Item No.:
Project No.:
EG20.25
S.I.S. No.:
414 Series Coved Corner Three-Compartment Sinks
Overall widths
mitered corner of
euro-style edging
Catalog Specification Sheet No.
(overhead view)
euro-style edging
(side view)
bowl size Dimension A
in. mm
20˝ x 16˝ 508 x 406 271⁄2˝ 699
24˝ x 18˝ 610 x 457 313⁄4˝ 807
22˝ x 22˝ 559 x 559 293⁄4˝ 756
24˝ x 24˝ 610 x 610 313⁄4˝ 807
Drain location for rough-in
bowl size Dimension B
in. mm
20˝ x 16˝ 508 x 406 14˝ 357
24˝ x 18˝ 610 x 457 16˝ 406
22˝ x 22˝ 559 x 559 15˝ 381
24˝ x 24˝ 610 x 610 16˝ 406
in. mm
in. mm
BOWL DIMENSIONS DRAINBOARD
width length length width length weight
model # in. mm in. mm quantity in. mm in. mm in. mm lbs. kg
414-16-3 20˝ 508 16˝ 406 0-27
414-16-3-18R or L 20˝ 508 16˝ 406 1 18˝ 457 27
414-16-3-18 20˝ 508 16˝ 406 2 18˝ 457 27
414-16-3-24R or L 20˝ 508 16˝ 406 1 24˝ 610 27
414-16-3-24 20˝ 508 16˝ 406 2 24˝ 610 271⁄2˝ 699 102˝ 2591 135 61.2
414-18-3* 24˝ 610 18˝ 457 0-31
414-18-3-18R or L* 24˝ 610 18˝ 457 1 18˝ 457 31
414-18-3-18* 24˝ 610 18˝ 457 2 18˝ 457 31
414-18-3-24R or L* 24˝ 610 18˝ 457 1 24˝ 610 31
414-18-3-24* 24˝ 610 18˝ 457 2 24˝ 610 313⁄4˝ 807 108˝ 2743 164 74.4
414-22-3* 22˝ 559 22˝ 559 0-29
414-22-3-18R or L* 22˝ 559 22˝ 559 1 18˝ 457 29
414 Series Coved Corner Three-Compartment Sinks
414-22-3-18* 22˝ 559 22˝ 559 2 18˝ 457 29
414-22-3-24R or L* 22˝ 559 22˝ 559 1 24˝ 610 29
414-22-3-24* 22˝ 559 22˝ 559 2 24˝ 610 293⁄4˝ 756 1201⁄2˝ 3061 170 77.1
414-24-3* 24˝ 610 24˝ 610 0-31
414-24-3-18R or L* 24˝ 610 24˝ 610 1 18˝ 457 31
414-24-3-18* 24˝ 610 24˝ 610 2 18˝ 457 31
414-24-3-24R or L* 24˝ 610 24˝ 610 1 24˝ 610 31
414-24-3-24* 24˝ 610 24˝ 610 2 24˝ 610 31
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
* Features two sets of faucet holes.
OVERALL DIMENSIONS
1
⁄2˝ 699 583⁄4˝ 1492 85 38.6
1
⁄2˝ 699 743⁄8˝ 1889 104 47.2
1
⁄2˝ 699 90˝ 2286 123 55.8
1
⁄2˝ 699 803⁄8˝ 2042 110 49.9
3
⁄4˝ 807 651⁄2˝ 1664 114 51.7
3
⁄4˝ 807 803⁄4˝ 2051 133 60.3
3
⁄4˝ 807 96˝ 2438 152 68.9
3
⁄4˝ 807 863⁄4˝ 2203 139 63.1
3
⁄4˝ 756 771⁄2˝ 1969 120 54.4
3
⁄4˝ 756 93˝ 2362 139 63.1
3
⁄4˝ 756 1081⁄2˝ 2756 158 71.6
3
⁄4˝ 756 99˝ 2515 145 65.8
3
⁄4˝ 807 831⁄2˝ 2121 125 56.7
3
⁄4˝ 807 983⁄4˝ 2508 144 65.3
3
⁄4˝ 807 114˝ 2896 163 73.9
3
⁄4˝ 807 1043⁄4˝ 2661 150 68.0
3
⁄4˝ 807 126˝ 3200 175 79.4
Printed in U.S.A.
©2009 by Eagle Group
Rev. 06/09
Loading...