Eagle 412-24-1-18 User Manual
Specification Sheet
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Short Form Specifications
Eagle One, Two, or Three Compartment Sinks, model
_____________, with 2˝-wide “Euro-Style” edging on front and
sides. Unit constructed of heavy gauge type 430 stainless steel
top and sink bowls. Sinks to be deep-drawn, seamless and have
all corners coved. Drainboards, when required, shall be
“V” creased for positive drainage. 9
1˝ upturn and tile edge. Legs to be 15⁄8˝ O.D. galvanized tubing,
with front-to-back crossbracing, and 1˝ high impact plastic
adjustable bullet feet.
1
⁄2˝ high backsplash with
FEATURING
NEW
2˝-WIDE
EURO-STYLE
EDGING
Options / Accessories
Stainless steel legs
Stainless steel bullet feet
White metal bullet feet
Lever drains
Twist handle drains
Twist drain brackets
Faucets
Sink covers
Waste outlet
Sink kits
Overflow hole
412 Series Sinks
MODELS:
412-16-*
412-16-*-18
412-16-*-18L
412-16-*-18R
412-16-*-24
* See charts on back page for full model numbers.
Materials
• Sink bowls: Heavy gauge type 430 stainless steel.
• Top: Drainboards, backsplash and euro-style edging are
heavy gauge type 430 stainless steel.
• Legs: 15⁄8˝ (41mm)-diameter heavy-gauge galvanized tubing
with plated 12-gauge gussets and high-impact cor ro sion
resistant fully adjustable bullet feet.
• Crossbracing, running front-to-back, is 1˝ (25mm)-diameter
heavy-gauge galvanized tubing.
Design and Construction Features
• All bowls have deep-drawn one-piece seamless
construction, using state-of-the-art hydraulic presses.
• All sink bowls have a generous radius—3˝ (76mm)
minimum—and are rectangular for maximum capac i ty.
• 101⁄2˝ (267mm) water level — 131⁄2˝ (343mm) flood level.
• Entire assembly is fuse-welded and planished, providing a
one-piece seamless sink unit.
• Drainboards, when provided, are integrally welded.
• 91⁄2˝ (241mm)-high full length standard backsplash features
1˝ (25mm) upturn and tile edge for easy installation and
feathering to wall/splash surface.
• Welded areas are blended to match adja cent surfaces with
continuity of satin finish.
• Leg gussets are welded to a die-cut heavy gauge
reinforcing plate.
• Leg gusset assemblies welded adjacent to sink bowls,
pro vid ing in creased stability and maximum weight support.
Mechanical:
• Water supply is 1⁄2˝ (13mm) IPS for hot and cold lines.
• Faucet holes are 11⁄8˝ (29mm), punched on 8˝ (203mm)
centers; two sets of faucet holes are punched where
indicated on chart (back page).
• Basket-type waste drains included fit sink bowls’
31⁄2˝ (89mm) opening and feature 11⁄2˝ (38mm) outlet.
412-16-*-24L
412-16-*-24R
412-24-*
412-24-*-18
412-24-*-18L
412-24-*-18R
412-24-*-24
412-24-*-24L
412-24-*-24R
EG20.03
412 Series Sinks
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2011 by the Eagle Group
Certifications / Approvals
EG20.03 Rev. 03/11
EG20.03
412 Series Sinks
Sinks with One Compartment
model # in. mm in. mm quantity in. mm in. mm in. mm lbs. kg
412-16-1 20˝ 508 16˝ 406 0-271⁄2˝ 699 231⁄4˝ 591 40 18.1
412-16-1-18R or L 20˝ 508 16˝ 406 1 18˝ 457 271⁄2˝ 699 387⁄8˝ 987 59 26.8
412-16-1-18 20˝ 508 16˝ 406 2 18˝ 457 271⁄2˝ 699 541⁄2˝ 1384 78 35.4
412-16-1-24R or L 20˝ 508 16˝ 406 1 24˝ 610 271⁄2˝ 699 447⁄8˝ 1140 65 29.5
Catalog Specification Sheet No.
412 Series Sinks
412-16-1-24 20˝ 508 16˝ 406 2 24˝ 610 271⁄2˝ 699 661⁄2˝ 1689 90 40.8
412-24-1 24˝ 610 24˝ 610 0-313⁄4˝ 807 311⁄2˝ 800 60 27.2
412-24-1-18R or L 24˝ 610 24˝ 610 1 18˝ 457 313⁄4˝ 807 463⁄4˝ 1188 79 35.8
412-24-1-18 24˝ 610 24˝ 610 2 18˝ 457 313⁄4˝ 807 62˝ 1575 98 44.5
412-24-1-24R or L 24˝ 610 24˝ 610 1 24˝ 610 313⁄4˝ 807 523⁄4˝ 1340 85 38.6
412-24-1-24 24˝ 610 24˝ 610 2 24˝ 610 313⁄4˝ 807 74˝ 1880 110 49.9
Sinks with Two Compartments
model # in. mm in. mm quantity in. mm in. mm in. mm lbs. kg
412-16-2 20˝ 508 16˝ 406 0-271⁄2˝ 699 41˝ 1041 64 29.0
412-16-2-18R or L 20˝ 508 16˝ 406 1 18˝ 457 271⁄2˝ 699 565⁄8˝ 1438 83 37.6
412-16-2-18 20˝ 508 16˝ 406 2 18˝ 457 271⁄2˝ 699 721⁄4˝ 1835 102 46.3
412-16-2-24R or L 20˝ 508 16˝ 406 1 24˝ 610 271⁄2˝ 699 625⁄8˝ 1591 89 40.4
412-16-2-24 20˝ 508 16˝ 406 2 24˝ 610 271⁄2˝ 699 841⁄4˝ 2140 114 51.7
412-24-2 24˝ 610 24˝ 610 0-313⁄4˝ 807 571⁄2˝ 1461 90 40.8
412-24-2-18R or L 24˝ 610 24˝ 610 1 18˝ 457 313⁄4˝ 807 723⁄4˝ 1847 109 49.4
412-24-2-18 24˝ 610 24˝ 610 2 18˝ 457 313⁄4˝ 807 88˝ 2235 128 58.1
412-24-2-24R or L 24˝ 610 24˝ 610 1 24˝ 610 313⁄4˝ 807 783⁄4˝ 2000 115 52.2
412-24-2-24 24˝ 610 24˝ 610 2 24˝ 610 313⁄4˝ 807 100˝ 2540 140 63.5
Item No.:
Project No.:
S.I.S. No.:
TOP VIEW OF ONE-COMPARTMENT SINKS
BOWL DIMENSIONS DRAINBOARD
width length length width length weight
TOP VIEW OF TWO-COMPARTMENT SINKS
BOWL DIMENSIONS DRAINBOARD
width length length width length weight
OVERALL DIMENSIONS
OVERALL DIMENSIONS
Sinks with Three Compartments
TOP VIEW OF THREE-COMPARTMENT SINKS
BOWL DIMENSIONS DRAINBOARD
width length length width length weight
model # in. mm in. mm quantity in. mm in. mm in. mm lbs. kg
412-16-3 20˝ 508 16˝ 406 0-271⁄2˝ 699 583⁄4˝ 1492 85 38.6
412-16-3-18R or L 20˝ 508 16˝ 406 1 18˝ 457 271⁄2˝ 699 745⁄8˝ 1895 104 47.2
412-16-3-18 20˝ 508 16˝ 406 2 18˝ 457 271⁄2˝ 699 90˝ 2286 123 55.8
412-16-3-24R or L 20˝ 508 16˝ 406 1 24˝ 610 271⁄2˝ 699 803⁄8˝ 2042 110 49.9
412-16-3-24 20˝ 508 16˝ 406 2 24˝ 610 271⁄2˝ 699 102˝ 2591 135 61.2
412-24-3 * 24˝ 610 24˝ 610 0-313⁄4˝ 807 831⁄2˝ 2121 125 56.7
412-24-3-18R or L * 24˝ 610 24˝ 610 1 18˝ 457 313⁄4˝ 807 983⁄4˝ 2508 144 65.3
412-24-3-18 * 24˝ 610 24˝ 610 2 18˝ 457 313⁄4˝ 807 114˝ 2896 163 73.9
412-24-3-24R or L * 24˝ 610 24˝ 610 1 24˝ 610 313⁄4˝ 807 1043⁄4˝ 2661 150 68.0
412-24-3-24 * 24˝ 610 24˝ 610 2 24˝ 610 313⁄4˝ 807 126˝ 3200 175 79.4
* Features two sets of faucet holes.
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
OVERALL DIMENSIONS
©2011 by Eagle Group
Printed in U.S.A.
Rev. 03/11
Loading...