Eagle 3TF1836, M1824-4 User Manual
Specification Sheet
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Short Form Specifications
Eagle Angle Shelf/Visual Merchandising Cart, model
______________. (EAGLEbrite
Valu-Master®Gray Epoxy, Valu-Gard®Green Epoxy) reverse
mat angled wire shelves with hangar rails. 3-sided truss
assembly at top and bottom for increased strength.
(EAGLEbrite
resilient wheel casters.
Options / Accessories
Additional angled shelves
Dividers
®
Zinc, Chrome Plated) posts with 5˝-diameter
angled shelf/visual merchandising cart
®
Zinc, Chrome, Black Epoxy,
Angled Shelf/
Visual Merchandising Carts
MODELS:
M1824*-4
M1836*-4
M1848*-4
M1860*-4
M1824*
* See charts on back for complete model numbers.
Design and Construction Features
• Prepackaged units include four shelves and four posts with
swivel casters.
• Easy assembly without the use of any tools.
• Entire unit stabilized at the top and bottom with
three-sided truss reinforcement braces for increased
strength and rigidity.
• Optional dividers and additional shelves are available to suit
any application.
Shelves
• Open wire design reduces dirt and dust buildup.
• Each shelf adjustable on 1˝ (25mm) vertical increments.
• Shelf slope, adjustable from 0° to 30° by simply raising
or lowering front and back truss brace, attributes to
product visibility.
• Shelves are reversible, allowing for smaller items to be
displayed at front of shelves if desired.
Posts
• 1˝ (25mm)-diameter 16 gauge steel tubular wall ensures
structural strength and stability in any use.
• Grooved at 1˝ (25mm) increments to allow for adjustment
of shelves.
Casters
• Constructed of heavy duty plated ball bearing die-casting.
• 5˝ (127mm)-diameter, 1
• Swivel casters, two with brake.
1
⁄2˝ (89mm)-diameter donut bumper.
• 3
M1836*
M1848*
M1860*
WR18-*
1
⁄4˝ (32mm)-wide resilient wheel.
LR24-*
LR36-*
LR48-*
LR60-*
3TF1836-*
3TF1848-*
3TF1860-*
M18*
EG01.44
Angled Shelf/Visual Merchandising Carts
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2010 by the Eagle Group
Certifications / Approvals
EG01.44 Rev. 05/10
EG01.44
Angled Shelf/Visual Merchandising Carts
Item No.:
Project No.:
S.I.S. No.:
REVERSIBLE SHELVING!
Catalog Specification Sheet No.
Angled Shelves
Hanger rails included.
Angled Shelf/Visual Merchandising Carts
Shelf Dividers
FRONT VIEW SIDE VIEW
EAGLEbrite®chrome black Valu-Master
model # model # model # model # model # in. mm lbs. kg
M1824Z-4 M1824C-4 M1824BL-4 M1824V-4 M1824VG-4 24˝ 610 52 23.6
M1836Z-4 M1836C-4 M1836BL-4 M1836V-4 M1836VG-4 36˝ 914 60 27.2
M1848Z-4 M1848C-4 M1848BL-4 M1848V-4 M1848VG-4 48˝ 1219 68 30.8
M1860Z-4 M1860C-4 M1860BL-4 M1860V-4 M1860VG-4 60˝ 1524 76 34.5
length weight
model # in. mm lbs. kg
M1824* 24˝ 610 4 1.8
M1836* 36˝ 914 9 4.1
M1848* 48˝ 1219 12 5.5
M1860* 60˝ 1524 17 7.7
length weight
model # in. mm lbs. kg
M18* 18˝ 457 1.0 0.5
* To specify finish, place the corresponding suffix after the model number.
suffix “Z” = EAGLEbrite
suffix “C” = Chrome suffix “VG” = Valu-Gard®green epoxy
Shelves can be reversed, turning the 3˝ front upturn into
a 1˝ front upturn. This allows smaller items to be
displayed at front of shelves if desired.
®
Valu-Gard
®
length weight
Options and Components
Hanger Rails
length weight
model # in. mm lbs. kg
LR24-* 24˝ 610 1.5 0.7
LR36-* 36˝ 914 1.9 0.9
LR48-* 48˝ 1219 2.1 1.0
LR60-* 60˝ 1524 2.5 1.1
WR18-* 18˝ 457 0.7 0.3
Note: 18˝ (457mm) rails are front-to-back
hanger rails. All others are used side-to-side.
®
(not available for #M18) suffix “V” = Valu-Master®gray epoxy
zinc suffix “BL” = Black epoxy
3-Sided Truss Frames
model # in. mm lbs. kg
3TF1836-* 36˝ 914 3.5 1.6
3TF1848-* 48˝ 1219 4.0 1.8
3TF1860-* 60˝ 1524 4.5 2.0
Note: 4-Sided Truss Frames also available.
To order, replace suffix “ 3TF” with “4TF”.
Example: 4TF1848-Z
length weight
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
©2010 by Eagle Group
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Printed in U.S.A.
Rev. 05/10
Loading...