Eagle 321561 User Manual
Specification Sheet
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Short Form Specifications
Eagle Floor Mounted Mop Sink, model F1916. Constructed of
type 304 stainless steel, with 8˝ deep-drawn coved corner sink
with drain and flat strainer plate.
mop sink
Mop Sink
MODELS:
F1916
Sink Bowl
• Heavy gauge type 304 stainless steel.
• Deep-drawn one piece seamless construction, using
state-of-the-art hydraulic presses.
• Generous radius with a minimum dimension of 3˝ (76mm),
rectangular for maximum capacity.
• Drain is 2˝ (51mm) NPS nickel-plated cast bronze body,
with removable snap-on stainless steel flat strainer plate.
• 8˝ (203mm) water level, 83⁄4˝ (222mm) flood level.
Top
• 16 gauge type 304 stainless steel.
• Exclusive anti-splash double-offset “V” edge
prevents spillage.
Skirt
• Heavy gauge type 304 stainless steel.
• Stud-bolted to underside of top in a concealed manner,
providing a clean visual appearance.
• Full skirt allows for tight sanitary seal.
EG20.01
Mop Sink
Options / Accessories
3-Pole mop holder
4-Pole mop holder
Hose and bracket
Service faucet
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodser
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com
vice Division: Phone 800-441-8440
Spec sheets available for viewing, printing or downloading from our online literature librar
Eagle Foodser
vice Equipment, Eagle MHC, SpecFAB
®
, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
Design and Construction Features
• A superior floor sink designed for institutional use as well
as those installations which require quality and durability.
Entire top assembly is fused, welded, and planished,
•
providing a one-piece seamless floor sink.
elded areas are high-speed belt blended to match adjacent
W
•
surfaces with continuity of satin finish.
• Water supply is
all-mount faucets are available as options.
W
•
Certifications / Approvals
1
⁄2˝ (13mm) IPS for hot and cold lines.
y at
EG20.01 Rev. 07/08
.eaglegrp.com
www
EG20.01
Mop Sink
Catalog Specification Sheet No.
TOP VIEW
Item No.:
Project No.:
S.I.S. No.:
Mop Sink
3-Pole Mop Holder
model # description lbs. kg
312688
4-Pole Mop Holder
model # description lbs. kg
321561
Hose & bracket
model # description lbs. kg
312689 30˝ (762mm) length
FRONT VIEW
bowl size overall size
width x length x depth width x length weight
model # in. mm in. mm lbs. kg
F1916 16˝ x 20˝ x 8˝ 406 x 508 x 203 211⁄2˝ x 245⁄8˝ 546 x 625 35 15.8
Optional Accessories for Mop Sink
weight
14˝ x 11⁄4˝ (356 x 32mm),
project out 1
24˝ x 4˝ (610 x 102mm),
projects out 1˝ (25mm)
3
⁄8˝ (35mm)
4 1.8
weight
4.5 2.0
weight
8 3.6
hose &
bracket
SIDE VIEW
3-pole
mop holder
service
faucet
Service faucet
model # description lbs. kg
8˝ (203mm) center, 1⁄2˝ (13mm)
312690 NPT female inlets, comes with 11 5.0
acuum break
v
er
weight
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
.eaglegrp.com
www
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature librar
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order
y at
©2008 by Eagle Group
.eaglegrp.com
www
Printed in U.S.A.
Rev. 07/08
.
Loading...