Eagle 300490 User Manual
Specification Sheet
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Short Form Specifications
Eagle Countertop Self Rimming Drop-In Sink, model
_________________. Sinks are type 304 stainless steel,
deep-drawn and self rimming. Faucet holes are punched on
4˝ centers. Positive holddown clamping tabs for top mount.
Faucet and drain included.
SRU14-10-5-1
SR10-14-9.5-2
SR10-14-9.5-3
Top Mount Bottom Mount
countertop
tab (shown
twisted out
and up)
sink
For Top Mount: Positive holddown clamping twist-tabs designed for up to
3/4˝ thick countertops. Holddowns for thicker tops are available.
For Bottom Mount: Kit sold separately—see back page.
sink
countertop
clip from
kit #362188
hardware
(not included)
Countertop Drop-In Sinks
with Self Rim Design*
MODELS:
SR10-14-5-1
SR10-14-9.5-1
SR12-14-9.5-1
SR14-10-5-1
SRU14-10-5-1
SR14-10-9.5-1
SR14-12-9.5-1
SR14-16-9.5-1
SR16-14-9.5-1
SR16-19-8-1
SR16-19-13.5-1
Design and Construction Features
• Sinks can be mounted onto top or bottom of countertop.
For bottom mount, order kit #362188 (see back page).
• Heavy gauge type 304 series stain less steel coved bowls
with large radi us.
• All sinks feature 3
center of the bowl.
• Crumb cup strainer as sem bly features 41⁄2˝ (114mm)-diameter
top flange and 11⁄2˝ (38mm) NPS outlet.
• All sinks feature deck-mounted faucet on 4˝ (102mm)**
centers; one-compartment sinks with 10˝ x 14˝ (254 x 356)
and 14˝ x 16˝ (356 x 406mm) bowls include faucet with
gooseneck spout.
• Self rimming.
• Deep-drawn.
• 18 or 20 gauge*** industrial grade construction and quality.
* Not intended for NSF installation into stainless steel worksurface.
Please consult factory if need arises.
** To order sinks with faucet holes punched on 8˝ (203mm) centers,
add suffix “-8CL”. Example: SR10-14-9.5-2-8CL
*** Varies per model sink. Refer to charts on back page.
Options / Accessories
Faucets (see back page)
Electronic-eye faucets
P-trap (#300789)
∆ Electronic-Eye Faucets are available for One-Compartment Sinks only.
SR18-24-13.5-1
SR19-16-8-1
SR19-16-13.5-1
SR20-12-6.5-1
SR22-22-13.5-1
SR24-18-13.5-1
SR24-24-13.5-1
SR10-14-9.5-2
SR12-14-9.5-2
SR14-16-9.5-2
SR16-19-13.5-2
SR18-24-13.5-2
SR22-22-13.5-2
SR24-24-13.5-2
SR10-14-9.5-3
SR12-14-9.5-3
SR14-16-9.5-3
SR16-19-8-3
SR16-19-13.5-3
SR18-24-13.5-3
SR16-19-8-2
1
⁄2˝ (89mm)-diameter drain hole in the
∆
(add suffix “-FE”)
EG20.39
Countertop Drop-In Sinks with Self Rim Design
EAGLE GROUP
Certifications / Approvals
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com
EG20.39 Rev. 11/11
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2011 by the Eagle Group
EG20.39
Item No.:
Project No.:
S.I.S. No.:
One-Compartment Sinks — Furnished with a #302004 faucet with gooseneck spout, except where noted.
inside bowl dimensions overall dimensions cutout for top mount cutout for bottom mount
model # in. mm in. mm in. mm in. mm lbs. kg gauge
SR10-14-5-1 14˝ x 10˝ x 5˝ 356 x 254 x 127 19˝ x 123⁄4˝ 483 x 324 175⁄8˝ x 111⁄4˝ 448 x 286 145⁄8˝ x 105⁄8˝ 372 x 270 10 4.5 20
SR10-14-9.5-1 14˝ x 10˝ x 91⁄2˝ 356 x 254 x 241 187⁄8˝ x 123⁄4˝ 480 x 324 171⁄2˝ x 111⁄4˝ 445 x 286 147⁄8˝ x 11˝ 378 x 279 12 5.4 18
SR12-14-9.5-1 14˝ x 12˝ x 91⁄2˝ 356 x 305 x 241 19˝ x 143⁄4˝ 483 x 375 175⁄8˝ x 131⁄4˝ 448 x 337 145⁄8˝ x 125⁄8˝ 372 x 321 14 6.4 20
SR14-10-5-1 10˝ x 14˝ x 5˝ 254 x 356 x 127 15˝ x 163⁄4˝ 381 x 426 135⁄8˝ x 151⁄4˝ 346 x 387 105⁄8˝ x 145⁄8 270 x 372 10 4.5 20
SRU14-10-5-1 10˝ x 14˝ x 5˝ 254 x 356 x 127 15˝ x 163⁄4˝ 381 x 426 135⁄8˝ x 151⁄4˝ 346 x 387 n/a 12 5.4 20
SR14-10-9.5-1 10˝ x 14˝ x 91⁄2˝ 254 x 356 x 241 15˝ x 165⁄8˝ 381 x 422 135⁄8˝ x 151⁄8˝ 346 x 384 11˝ x 147⁄8˝ 279 x 378 12 5.4 18
SR14-12-9.5-1 12˝ x 14˝ x 91⁄2˝ 305 x 356 x 241 17˝ x 163⁄4˝ 432 x 426 155⁄8˝ x 151⁄4˝ 397 x 387 125⁄8˝ x 145⁄8˝ 321 x 372 14 6.4 20
SR14-16-9.5-1 16˝ x 14˝ x 91⁄2˝ 406 x 356 x 241 21˝ x 163⁄4˝ 533 x 425 195⁄8˝ x 151⁄4˝ 499 x 387 165⁄8˝ x 145⁄8˝ 422 x 372 23 10.4 20
SR16-14-9.5-1 14˝ x 16˝ x 91⁄2˝ 356 x 406 x 241 19˝ x 183⁄4˝ 483 x 476 175⁄8˝ x 171⁄4˝ 448 x 438 145⁄8˝ x 165⁄8˝ 372 x 422 23 10.4 20
SR16-19-8-1 20˝ x 16˝ x 8˝ 508 x 406 x 203 243⁄4˝ x 181⁄2˝ 629 x 470 233⁄8˝ x 17˝ 594 x 432 203⁄4˝ x 163⁄4˝ 527 x 426 26 11.8 18
SR16-19-13.5-1 20˝ x 16˝ x 131⁄2˝ 508 x 406 x 343 243⁄4˝ x 181⁄2˝ 629 x 470 233⁄8˝ x 17˝ 594 x 432 203⁄4˝ x 163⁄4˝ 527 x 426 28 12.7 18
Catalog Specification Sheet No.
SR18-24-13.5-1 24˝ x 18˝ x 131⁄2˝ 610 x 457 x 343 283⁄4˝ x 201⁄2˝ 730 x 521 273⁄8˝ x 19˝ 695 x 483 243⁄4˝ x 183⁄4˝ 629 x 476 32 14.5 18
SR19-16-8-1* 16˝ x 20˝ x 8˝ 406 x 508 x 203 203⁄4˝ x 221⁄2˝ 527 x 572 193⁄8˝ x 21˝ 492 x 533 163⁄4˝ x 203⁄4˝ 426 x 527 24 10.9 18
SR19-16-13.5-1* 16˝ x 20˝ x 131⁄2˝ 406 x 508 x 343 203⁄4˝ x 221⁄2˝ 527 x 572 193⁄8˝ x 21˝ 492 x 533 163⁄4˝ x 203⁄4˝ 426 x 527 25 11.3 18
SR20-12-6.5-1 12˝ x 20˝ x 61⁄2˝ 305 x 508 x 165 17˝ x 223⁄4˝ 432 x 578 155⁄8˝ x 211⁄4˝ 397 x 540 125⁄8˝ x 205⁄8˝ 321 x 524 28 12.7 20
SR22-22-13.5-1* 22˝ x 22˝ x 131⁄2˝ 559 x 559 x 343 27˝ x 243⁄4˝ 686 x 629 255⁄8˝ x 231⁄4˝ 651 x 591 225⁄8˝ x 225⁄8˝ 575 x 575 34 15.4 18
SR24-18-13.5-1* 18˝ x 24˝ x 131⁄2˝ 457 x 610 x 343 223⁄4˝ x 261⁄2˝ 578 x 673 213⁄8˝ x 25˝ 543 x 635 183⁄4˝ x 243⁄4˝ 476 x 629 32 14.5 18
SR24-24-13.5-1* 24˝ x 24˝ x 131⁄2˝ 610 x 610 x 343 283⁄4˝ x 261⁄2˝ 730 x 673 273⁄8˝ x 25˝ 695 x 635 2411⁄16˝ x 2411⁄16˝ 627 x 627 36 16.3 18
#SRU14-10-5-1 features an upturn on sides and rear; *These sinks utilize a #300490 faucet with 12˝ (305mm) swivel spout.
width x length x depth width x length width x length width x length weight 18 or 20
Two-Compartment Sinks — Furnished with a #300490 faucet with 12˝ (203mm) spout, except where noted.
inside bowl dimensions overall dimensions cutout for top mount cutout for bottom mount
model # in. mm in. mm in. mm in. mm lbs. kg gauge
SR10-14-9.5-2* 14˝ x 10˝ x 91⁄2˝ 356 x 254 x 241 187⁄8˝ x 243⁄4˝ 480 x 629 171⁄2˝ x 231⁄4˝ 445 x 591 147⁄8˝ x 23˝ 378 x 584 25 11.3 18
SR12-14-9.5-2 14˝ x 12˝ x 91⁄2˝ 356 x 305 x 241 19˝ x 283⁄4˝ 483 x 730 175⁄8˝ x 271⁄4˝ 448 x 692 145⁄8˝ x 265⁄8˝ 372 x 676 27 12.2 20
SR14-16-9.5-2 16˝ x 14˝ x 91⁄2˝ 406 x 356 x 241 21˝ x 323⁄4˝ 525 x 832 195⁄8˝ x 311⁄4˝ 499 x 794 165⁄8˝ x 305⁄8˝ 422 x 778 42 19.1 20
SR16-19-8-2 20˝ x 16˝ x 8˝ 508 x 406 x 203 24
SR16-19-13.5-2 20˝ x 16˝ x 131⁄2˝ 508 x 406 x 343 243⁄4˝ x 361⁄4˝ 527 x 921 233⁄8˝ x 343⁄4˝ 594 x 883 203⁄4˝ x 341⁄2˝ 527 x 876 52 23.6 18
SR18-24-13.5-2 24˝ x 18˝ x 131⁄2˝ 610 x 457 x 343 283⁄4˝ x 401⁄4˝ 730 x 1022 273⁄8˝ x 383⁄4˝ 695 x 984 243⁄4˝ x 381⁄2˝ 629 x 978 56 24.9 18
SR22-22-13.5-2 22˝ x 22˝ x 131⁄2˝ 559 x 559 x 343 27˝ x 483⁄4˝ 686 x 1238 255⁄8˝ x 471⁄4˝ 651 x 1200 225⁄8˝ x 465⁄8˝ 575 x 1184 57 25.9 18
SR24-24-13.5-2 24˝ x 24˝ x 131⁄2˝ 610 x 610 x 343 283⁄4˝ x 521⁄8˝ 730 x 1324 273⁄8˝ x 505⁄8˝ 695 x 1286 243⁄4˝ x 503⁄8˝ 629 x 1280 64 29.0 18
* Model #SR10-14-9.5-2 utilizes a #301248 faucet with 8˝ (203mm) swivel spout.
width x length x depth width x length width x length width x length weight 18 or 20
3
⁄4˝ x 361⁄4˝ 527 x 921 233⁄8˝ x 343⁄4˝ 594 x 883 203⁄4˝ x 341⁄2˝ 527 x 876 48 21.8 18
Three-Compartment Sinks — Furnished with a #300490 faucet with 12˝ (305mm) spout, except where noted.
inside bowl dimensions overall dimensions cutout for top mount cutout for bottom mount
model # in. mm in. mm in. mm in. mm lbs. kg gauge
SR10-14-9.5-3 14˝ x 10˝ x 91⁄2˝ 356 x 254 x 241 187⁄8˝ x 363⁄4˝ 480 x 933 171⁄2˝ x 351⁄4˝ 445 x 895 147⁄8˝ x 35˝ 378 x 889 37 16.8 18
SR12-14-9.5-3 14˝ x 12˝ x 91⁄2˝ 356 x 305 x 241 19˝ x 423⁄4˝ 483 x 1086 175⁄8˝ x 411⁄4˝ 448 x 1031 145⁄8˝ x 405⁄8˝ 372 x 1032 39 17.6 20
SR14-16-9.5-3 16˝ x 14˝ x 91⁄2˝ 406 x 356 x 241 21˝ x 483⁄4˝ 533 x 1238 195⁄8˝ x 471⁄4˝ 498 x 1200 165⁄8˝ x 465⁄8˝ 422 x 1184 66 29.9 20
SR16-19-8-3 20˝ x 16˝ x 8˝ 508 x 406 x 203 243⁄4˝ x 54˝ 629 x 1372 233⁄4˝ x 521⁄2˝ 594 x 1334 203⁄4˝ x 521⁄4˝ 527 x 1327 72 32.7 18
SR16-19-13.5-3 20˝ x 16˝ x 131⁄2˝ 508 x 406 x 343 243⁄4˝ x 54˝ 629 x 1372 233⁄4˝ x 521⁄2˝ 594 x 1334 203⁄4˝ x 521⁄4˝ 527 x 1327 77 34.9 18
Countertop Drop-In Sinks with Self Rim Design
SR18-24-13.5-3* 24˝ x 18˝ x 131⁄2˝ 610 x 457 x 343 283⁄4˝ x 60˝ 730 x 1524 273⁄4˝ x 581⁄2˝ 695 x 1486 243⁄4˝ x 581⁄4˝ 629 x 1480 82 37.2 18
* These sinks utilize a #301440 faucet with 14˝ (356mm) swivel spout.
#313306
T&S faucet
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065 • www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
width x length x depth width x length width x length width x length weight 18 or 20
Optional Deck Mount Faucets
description model # model #
gooseneck faucet, 4˝ (102mm) center, for single bowls
8˝ (203mm) spout, 4˝ (102mm) center, for single and double bowls
12˝ (305mm) spout, 4˝ (102mm) center, for triple bowls
14˝ (356mm) spout, 8˝ (203mm) center, for triple bowls
8˝ (203mm) spout, 8˝ (203mm) center, for single and double bowls, w/spray arm
12˝ (305mm) spout, 8˝ (203mm) center, for triple bowls, w/spray arm
14˝ (356mm) spout, 8˝ (203mm) center, for triple bowls, w/spray arm
* Faucets with spray arm require special faucet holes.
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
Standard T&S
302004 313308
301248 313306
300490 313303
301440 313307
— 303560*
— 303561*
— 303562*
Bottom-Mount Kit
One kit required per
sink bowl.
description model #
8 undermount
clips per kit
©2011 by Eagle Group
362188
Printed in U.S.A.
Rev. 11/11
Loading...