Eagle 300293 User Manual

Specification Sheet

Catalog Specification Sheet No.

Item No.:

Project No.:

S.I.S. No.:

Dishtable Accessories

Scrap Basket

• This model features all-16 gauge stainless steel construction.

• Tabs provide proper height and basket drainage.

shipping wt.

model # lbs. kg

301630 15 6.8

Rack Slide

• 16 gauge construction.

See Spec Sheet #EG50.06 for optional Dishtable Racks.

shipping wt.

model # lbs. kg

301124 4 1.8

Prerinse Basket with Slide Bar

• An all-in-one combination.

• Type 304 construction throughout.

width x length x height shipping wt.

model # in. mm lbs. kg

606434 17

⁄2˝ x 191⁄2˝ x 2˝ 445 x 493 x 51 3 1.4

Prerinse Units…

• Temperature adjustment for hot water with preset cold water adjustment for anti-scald protection.

MODELS:

300* 301* 305428 311722

* See charts for full model numbers.

313* 316660 316743 351585

605* 606* DTRA-24 DVS-*

HDC* SCRAP TROUGH

Drain Trough

• 5˝ (127mm) wide and 2˝ (51mm) deep with a 11⁄2˝ (38mm) center drain opening.

• Removable basket with handles.

• All-stainless steel construction.

shipping wt.

model # lbs. kg

SCRAP TROUGH 13 5.8

scrap trough

Dishtable Undershelves

• Provides extra space for rack storage and operations equipment.

⁄8˝ (612mm) wide.

• 24

NOTE: Order one size smaller than dishtable.

See Spec Sheet #EG50.12 for optional LIFESTOR Dishtables.

Galvanized 400 Series 300 Series length weight

model # model # model # in. mm lbs. kg

605371 605374 606479 24˝ 610 10 4.5 605372 605375 606480 36˝ 914 15 6.8 605373 605376 606481 48˝ 1219 20 9.0

Polymer Undershelf for

shipping

EG50.07B

Dishtable Accessories

…Standard Prerinse Components

model # description

300719 splash-mounted spray unit 300718 deck-mounted spray unit 301189 faucet add-on with 12˝ (305mm) spout 301190 wall bracket

…T&S Extra Heavy Duty Prerinse Components

• Top-of-the-line.

model # description

313295 deck-mounted spray unit with wall bracket 313297 faucet add-on with 12˝ (305mm) spout

EAGLE GROUP

Stainless Steel Gussets

• Optional only for 16 gauge tables.

• Standard on SPEC-MASTER®tables.

model # description

316743 stainless steel gussets

Bullet Feet

With a full 1˝ (25mm) adjustment.

model # description

300692 stainless steel 301036 white metal 300293 plastic

Certifications / Approvals

gusset

100 Industrial Boulevard, Clayton, DE 19938-8903 USA Phone: 302-653-3000 • Fax: 302-653-2065 www.eaglegrp.com

Foodservice Division: Phone 800-441-8440 MHC/Retail Display Divisions: Phone 800-637-5100

For custom configuration or fabrication needs, contact our SpecFAB®Division.

Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com

EG50.07B Rev. 04/12

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

EG50.07B

Dishtable Accessories

Legs and Crossbrace Assemblies

• Stainless steel welded construction.

Standard only on SPEC-MASTER®series dishtables.

model # description

311772 crossbrace assembly 316660 crossbrace assembly for undercounter dishtables

Catalog Specification Sheet No.

300765 single leg for undershelf

Sink Covers

• 18 gauge stainless steel with holes provided for handling.

width x length shipping wt.

model # in. mm lbs. kg

305428 20˝ x 20˝ 508 x 508 11 5.0 351585 16˝ x 20˝ 406 x 508 10 4.5

PVC Rollers

Dishtable Accessories

• 2˝ (51mm) diameter.

• Free-wheel.

• For 14/304 dishtables only.

• For ease of sliding racks.

• For stainless steel rollers,

contact factory.

corner dishtable with optional PVC rollers

length shipping wt.

model # in. mm lbs. kg

DTRA-24 24˝ 610 3 1.4

Three rollers required for every 12˝ (305mm). Example: For a 6 (1829mm) table, at the required three per foot: 6 table x 3 per foot = 18 rollers needed.

Anti-Siphon Breaker

model # description

313832 brass, for

⁄2˝ pipe size

See Spec Sheet #EG50.07A for Dishtable Modifications.

Lever Drains

model # description

300720 1 300721 2˝ (51mm) NPS connection

⁄2˝ or 2˝ (38 or 51mm) NPS connection

Dishwasher Condensate Vents, DVS Series

• Mounts to dishwasher end vents.

• Seams are continuously liquid-tight.

• 18 gauge type 304 stainless steel.

outer width x length x height * weight

model # in. mm lbs. kg

DVS-48 4˝ x 16˝ x 48˝ 102 x 406 x 1219 60 27.2 DVS-60 4˝ x 16˝ x 60˝ 102 x 406 x 1524 75 34.0 DVS-72 4˝ x 16˝ x 72˝ 102 x 406 x 1829 90 40.8

* Outer dimensions exclude 2˝ flange.

For other size requirements, please call the factory.

Dishwasher Condensate and Type II Hoods, HDC Series

NFPA-96

( )

For Type II applications, optional baffles are available. To order, add suffix “S” to model number (example: HDC3636S).

• 12˝ x 12˝ (305 x 305mm) collar opening for exhaust connection.

• Type 304 stainless steel construction.

• Full perimeter gutter with drain tube located on the left.

model # in. mm lbs. kg

HDC3636 36˝ x 36˝ x 20˝ 914 x 914 x 508 150 68.0 HDC3642 36˝ x 42˝ x 20˝ 914 x 1067 x 508 155 70.3 HDC3648 36˝ x 48˝ x 20˝ 914 x 1219 x 508 175 79.4 HDC4242 42˝ x 42˝ x 20˝ 1067 x 1067 x 508 194 88.0 HDC4848 48˝ x 48˝ x 20˝ 1219 x 1219 x 508 206 93.4 HDC4860 48˝ x 60˝ x 20˝ 1219 x 1524 x 508 226 102.5

* For other size requirements, please call the factory.

for TYPE II

overall width x length x height*

sh. weight

EAGLE GROUP 100 Industrial Boulevard, Clayton, DE 19938-8903 USA Phone: 302-653-3000 • Fax: 302-653-2065 www.eaglegrp.com

Foodservice Division: Phone 800-441-8440

MHC/Retail Display Divisions: Phone 800-637-5100

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for

typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.

Printed in U.S.A.

Rev. 04/12